Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
xorg-x11 fonts problem
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
skormel
Tux's lil' helper
Tux's lil' helper


Joined: 12 Jun 2004
Posts: 122
Location: España

PostPosted: Tue May 23, 2006 5:37 pm    Post subject: xorg-x11 fonts problem Reply with quote

I've got UTF8 working and I remap the keyboard so I can use the option_key to print the tilde, the rest of the keys that need the use of this key.

My problem is that on xorg-x11 doesn't work, but without the X work perfectly.

Here are my config files:

Code:

powerbook skormel # locale
LANG=es_ES.UTF-8
LC_CTYPE="es_ES.UTF-8"
LC_NUMERIC="es_ES.UTF-8"
LC_TIME="es_ES.UTF-8"
LC_COLLATE="es_ES.UTF-8"
LC_MONETARY="es_ES.UTF-8"
LC_MESSAGES="es_ES.UTF-8"
LC_PAPER="es_ES.UTF-8"
LC_NAME="es_ES.UTF-8"
LC_ADDRESS="es_ES.UTF-8"
LC_TELEPHONE="es_ES.UTF-8"
LC_MEASUREMENT="es_ES.UTF-8"
LC_IDENTIFICATION="es_ES.UTF-8"
LC_ALL=es_ES.UTF-8


Code:


powerbook skormel # cat /etc/rc.conf
# /etc/rc.conf: Global startup script configuration settings

# UNICODE specifies whether you want to have UNICODE support in the console. 
# If you set to yes, please make sure to set a UNICODE aware CONSOLEFONT and
# KEYMAP in the /etc/conf.d/consolefont and /etc/conf.d/keymaps config files.

UNICODE="yes"

# Set EDITOR to your preferred editor.
# You may use something other than what is listed here.

EDITOR="/bin/nano"
#EDITOR="/usr/bin/vim"
#EDITOR="/usr/bin/emacs"

# What display manager do you use ?  [ xdm | gdm | kdm | entrance ]
#DISPLAYMANAGER="xdm"

# XSESSION is a new variable to control what window manager to start
# default with X if run with xdm, startx or xinit.  The default behavior
# is to look in /etc/X11/Sessions/ and run the script in matching the
# value that XSESSION is set to.  The support scripts are smart enough to
# look in all bin directories if it cant find a match in /etc/X11/Sessions/,
# so setting it to "enlightenment" can also work.  This is basically used
# as a way for the system admin to configure a default system wide WM,
# allthough it will work if the user export XSESSION in his .bash_profile, etc.
#
# NOTE:  1) this behaviour is overridden when a ~/.xinitrc exists, and startx
#           is called.
#        2) even if ~/.xsession exists, if XSESSION can be resolved, it will
#           be executed rather than ~/.xsession, else KDM breaks ...
#
# Defaults depending on what you install currently include:
#
# Gnome - will start gnome-session
# kde-<version> - will start startkde (ex: kde-3.0.2)
# Xsession - will start a terminal and a few other nice apps

#XSESSION="Gnome"


Code:

powerbook skormel # cat /etc/conf.d/keymaps
# /etc/conf.d/keymaps

# Use KEYMAP to specify the default console keymap.  There is a complete tree
# of keymaps in /usr/share/keymaps to choose from.

KEYMAP="-u es"


# Should we first load the 'windowkeys' console keymap?  Most x86 users will
# say "yes" here.  Note that non-x86 users should leave it as "no".

SET_WINDOWKEYS="no"


# The maps to load for extended keyboards.  Most users will leave this as is.

#EXTENDED_KEYMAPS=""
EXTENDED_KEYMAPS="backspace keypad euro"

# Tell dumpkeys(1) to interpret character action codes to be
# from the specified character set.
# This only matters if you set UNICODE="yes" in /etc/rc.conf.
# For a list of valid sets, run `dumpkeys --help`

DUMPKEYS_CHARSET=""


Code:

powerbook ~ # cat /etc/conf.d/consolefont
# /etc/conf.d/consolefont

# CONSOLEFONT specifies the default font that you'd like Linux to use on the
# console.  You can find a good selection of fonts in /usr/share/consolefonts;
# you shouldn't specify the trailing ".psf.gz", just the font name below.
# To use the default console font, comment out the CONSOLEFONT setting below.
# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
# not want to use it, run "rc-update del consolefont" as root).

CONSOLEFONT="lat9w-16"

# CONSOLETRANSLATION is the charset map file to use.  Leave commented to use
# the default one.  Have a look in /usr/share/consoletrans for a selection of
# map files you can use.

CONSOLETRANSLATION="8859-15_to_uni"

Code:

zcat /usr/share/keymaps/i386/qwerty/es.map.gz
...
..keycode  53 = minus      underscore
        control keycode  53 = Delete
        alt     keycode  53 = Meta_slash
keycode  54 = Shift
keycode  56 = Alt
keycode  57 = space
        control keycode  57 = nul
        alt     keycode  57 = Meta_space
keycode  58 = Caps_Lock
keycode  86 = less greater
        alt     keycode  86 = Meta_less
        shift alt keycode 86 = Meta_bar
keycode  97 = Control
keycode 125 = AltGr


Code:

cat /etc/X11/xorg.conf

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
#    Load        "speedo"# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"
    Load        "freetype"
#    Load        "xtt"


EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath     "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/TrueType/"
    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc105"
    Option "XkbLayout"  "es"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/input/mice"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "tft12"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 48.5

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks     25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "nvidia5200"
    Driver      "nv"
    #VideoRam    8192
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"    Identifier  "Screen 1"
    Device      "nvidia5200"
    Monitor     "tft12"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes           "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"#    Mode 0666
# EndSection


My computer is a Powerbook 12" 1.5Ghz 1.25Ghz RAM

Where is my problem?

Thanks you all, and excuse for my bad english.
_________________
Los moteros duros no mueren, ¡¡van al infierno!!
----------------------
AM2 4.2Ghz, 2Gb DDR2-667,M2N-SLI Deluxe, 250+400Gb SATA2, 6800GT PCI-E , Audigy.
Powerbook 12" G4@1.5Ghz
Macbook pro 17" 2.13Ghz
Via Epia@550Mhz
.... .....
Back to top
View user's profile Send private message
mariourk
l33t
l33t


Joined: 11 Jul 2003
Posts: 807
Location: Urk, Netherlands

PostPosted: Wed May 24, 2006 10:39 am    Post subject: Reply with quote

What desktop do you use on top of X-org? Gnome or KDE?
In case you use Gnome, you shoud emerge gdm
Code:

emerge gnome-base/gdm

Than you need to edit /etc/rc.conf and uncomment this line.
Also change "xdm" to "gdm"
Code:

DISPLAYMANAGER="gdm"

Once you have that done, start gdm
Code:

/etc/init.d/xdm start

Once gdm is started, you can set the language you want to use.
gdm will ask you if you want to make it your default language, so choose yes.

I hope this is somehow helpfull. Good luck :)
_________________
If there is one thing to learn from history, it's that we usualy don't learn anything from it, at all.
Back to top
View user's profile Send private message
skormel
Tux's lil' helper
Tux's lil' helper


Joined: 12 Jun 2004
Posts: 122
Location: España

PostPosted: Wed May 24, 2006 3:57 pm    Post subject: Reply with quote

I don't use kde or gnome, I use ion3, and I don't use gdm, kdm or xdm yet, but I'll probe it that later.
_________________
Los moteros duros no mueren, ¡¡van al infierno!!
----------------------
AM2 4.2Ghz, 2Gb DDR2-667,M2N-SLI Deluxe, 250+400Gb SATA2, 6800GT PCI-E , Audigy.
Powerbook 12" G4@1.5Ghz
Macbook pro 17" 2.13Ghz
Via Epia@550Mhz
.... .....
Back to top
View user's profile Send private message
luispa
Guru
Guru


Joined: 17 Mar 2006
Posts: 357
Location: España

PostPosted: Fri May 26, 2006 11:14 am    Post subject: Reply with quote

Hi skormel,

Please try what I have documented here: https://forums.gentoo.org/viewtopic-t-462177.html

Also, notice that If you try to get the áéíóúñÑ ... etc... in a non UTF8 enabled terminal (one example is Konsole) then it'll not work.

I mean. For your tests under X I recommend you to use uxterm for example, or I use Firefox and when posting a reply here I tested that the keyboard is working and can type the special characters.

Luis
Back to top
View user's profile Send private message
skormel
Tux's lil' helper
Tux's lil' helper


Joined: 12 Jun 2004
Posts: 122
Location: España

PostPosted: Fri May 26, 2006 2:12 pm    Post subject: Reply with quote

It's work great!!!!!!

Thanks!!!!!!
_________________
Los moteros duros no mueren, ¡¡van al infierno!!
----------------------
AM2 4.2Ghz, 2Gb DDR2-667,M2N-SLI Deluxe, 250+400Gb SATA2, 6800GT PCI-E , Audigy.
Powerbook 12" G4@1.5Ghz
Macbook pro 17" 2.13Ghz
Via Epia@550Mhz
.... .....
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum