Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
The Gentoo Framebuffer, Bootsplash & Grubsplash How-To
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 9, 10, 11 ... 25, 26, 27  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
yamakawa
Guru
Guru


Joined: 28 Jul 2003
Posts: 340

PostPosted: Mon Jan 19, 2004 4:28 am    Post subject: Reply with quote

Hi,
I recently succeeded in using bootsplash. Until then, I had been wandering around here and there including this kind and detailed guide.
I did follow all the instructions as indicated, reviewed all the setting again and again, without any success at all.
The answer to me was in the BIOS setting. Switching the video ram size from 1MB, which is default, to 8MB, finally showed a nice Larry the Cow image in full screen! :D
If you don't mind, please add this trivial but very important tip in your guide. Some must be helped with this, I guess.

Thank you
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Mon Jan 19, 2004 10:06 am    Post subject: Reply with quote

Danone: Turn off the following kernel option: Device Drivers > Graphics Support > Logo Configuration > Bootup Logo. You can use either the logo or bootsplash but not both. Also, I don't see the need to edit box details. I've never edited box details. They have always been default and worked fine. Remember that the box details are only for the inner box. If your whole screen image is tilted it's probably something else. If you want a higher refresh rate there is another guide on this forum which tells you how to get it. Do a search. Also, if you use love-sources it has the higher refresh rate patch already applied.
_________________
http://dhruba.name/
Back to top
View user's profile Send private message
danone
Guru
Guru


Joined: 18 Jan 2004
Posts: 398
Location: Germany

PostPosted: Mon Jan 19, 2004 11:22 am    Post subject: Any suggestions Narada? Reply with quote

Well how i can use 12280x1024@85Hz resolution?Mabe the Vesafb are not capable to do that.....


well the other question is what mathematic i need to set the boxes the coordinates to make the textboxen there are some in the cfg sample but how to geht those integers and values here that i mean
Code:
box silent         [u]320 906 1280 906 #313234[/u]
box nnover ....
where i get these values from? is there a howto which help me with setting up the textbox on console with bootsplash?

Narada can I contact you in IRC?
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Mon Jan 19, 2004 12:03 pm    Post subject: Re: Any suggestions Narada? Reply with quote

danone wrote:
Well how i can use 12280x1024@85Hz resolution?Mabe the Vesafb are not capable to do that.....

Look at the Getting higher refresh rates using vesafb driver guide. I'm not sure what you want to change with box values but generally there is no guide - it has to be done by trial and error. I don't go on irc these days at all - far too busy with uni work.
_________________
http://dhruba.name/
Back to top
View user's profile Send private message
d3vlin
Tux's lil' helper
Tux's lil' helper


Joined: 02 Apr 2003
Posts: 134
Location: The Hague

PostPosted: Sun Jan 25, 2004 10:21 pm    Post subject: Reply with quote

created a silent splash screen for the gentoo theme based on the emergence picture gentoo.org.

here's the jpg:
http://marconi.demon.nl/daan/misc/silent-1280x1024.jpg

here's the modded bootsplash cnf:
http://marconi.demon.nl/daan/misc/bootsplash-1280x1024.cfg

enjoy.

btw I have bootsplash-themes installed (using /usr/local/portage), therefore I put my silent splash in /usr/share/bootsplash/themes/images/
Back to top
View user's profile Send private message
GrayFox
Apprentice
Apprentice


Joined: 24 Jan 2004
Posts: 183
Location: Germany

PostPosted: Mon Jan 26, 2004 1:42 pm    Post subject: Reply with quote

Oh my god...I just compiled a new kernel because I need usb support.
Now I always get a blank screen after grub and it seems like x won't start too.I still have the old kernel but its the same there.
Btw am I doing something wrong when compiling a new kernel for I have to reinstall my nvidia drivers every time even if I boot the old kernel.

So can I chroot back into my gentoo using the live CD?How?
And then what fixes my problem?Do I have to do the bootsplash configuration again?
Please help a new one.

--made a blind nvidia driver install and now I can boot to my login manager but bootup is still just a black screen...looks like fb isnt working but why?I did the bootsplash configuration again but no chance.The screen is also black when there are no additional kernel paramerters i.e. no initrd,video and vga.
EDIT:Everything is working now.I had to recompile the kernel and then it worked.Well I think I had to delete my initrd and create it again.Is that needed when recompiling a kernel...?
And do I always have to reinstall my nvidia driver after recomiling kernel?
Back to top
View user's profile Send private message
ZeRat
n00b
n00b


Joined: 25 Jan 2004
Posts: 24
Location: Europe

PostPosted: Sun Feb 01, 2004 4:37 pm    Post subject: Reply with quote

Wow
thanks for great how-to :lol:
Back to top
View user's profile Send private message
deadaim
Guru
Guru


Joined: 27 Oct 2003
Posts: 467
Location: Florida

PostPosted: Sun Feb 01, 2004 7:22 pm    Post subject: Reply with quote

GrayFox wrote:
And do I always have to reinstall my nvidia driver after recomiling kernel?


Yes, you do need to reinstall your nvidia drivers after recompiling a kernel.
Back to top
View user's profile Send private message
flaab_0n
Guru
Guru


Joined: 27 Dec 2003
Posts: 470
Location: /España/Madrid/Alcorcon

PostPosted: Tue Feb 03, 2004 12:44 am    Post subject: Reply with quote

Very GOOD guide my friend..!!

Just one question.

What should I add to my lilo.conf if I want to boot mu bootsplash in silent mode. I don't know how to introduce the variable SPLASH to my lilo.conf.

image=/boot/kernel-2.4.22-gentoo-r5
vga=0x317
label=2.4.22-test
root=/dev/hda6
append="hdc=ide-scsi video=vesa:ywrap,mtrr"
initrd=/boot/initrd-1024x768

Where to ADD the SPLASH=SILENT stuff??

thans
_________________
[ _Flaab_0n ]

www.quinielalosases.com
Back to top
View user's profile Send private message
zurd
Apprentice
Apprentice


Joined: 17 Dec 2003
Posts: 228
Location: Canada, Montreal

PostPosted: Tue Feb 03, 2004 4:35 am    Post subject: silent mode Reply with quote

Just like they say :

splash= goes on kernel line and takes either 'silent' or 'verbose' but silent boots may not work

So if you have lilo like me, use it like that :
append="video=vesa:ywrap,mtrr splash=silent"
And of course if your lilo.conf already has other options in the append line (which is the kernel line), don't forget them.

But, anyone can answer why they say that the silent boots may not work ? Everything's fine here, but the silent boot which I would really like to have.

I got the splash=silent and there's the progress_enable=1 in the cfg file, everything looks good but I don't see my silent mode. Why ?
Back to top
View user's profile Send private message
Princess Firefly
Tux's lil' helper
Tux's lil' helper


Joined: 21 Apr 2002
Posts: 80

PostPosted: Sat Feb 07, 2004 10:15 pm    Post subject: Don't compile in other FB devices Reply with quote

Hopefully this hasn't been said, but I sure couldn't find it. After hours of trying to get bootsplash to work I finally discovered that having the rage128 framebuffer device compiled in the kernel was preventing bootsplash from working. I disabled that and made sure only VESA was selected and it worked fine.

I don't know if it's only rage128 or all the specific devices (ie. not the generic VESA driver that you need to have compiled).
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Sun Feb 08, 2004 2:43 am    Post subject: Re: Don't compile in other FB devices Reply with quote

Princess Firefly wrote:
Hopefully this hasn't been said, but I sure couldn't find it. After hours of trying to get bootsplash to work I finally discovered that having the rage128 framebuffer device compiled in the kernel was preventing bootsplash from working. I disabled that and made sure only VESA was selected and it worked fine.

I don't know if it's only rage128 or all the specific devices (ie. not the generic VESA driver that you need to have compiled).


Hi. Thanks for the feedback. This has been mentioned in the guide in step 4. To quote from the guide:
Code:
Build the following options into the kernel. Do NOT make them modules and do NOT enable nvidia or ATi specific options.

_________________
http://dhruba.name/
Back to top
View user's profile Send private message
latz-twn
Tux's lil' helper
Tux's lil' helper


Joined: 08 Nov 2003
Posts: 95
Location: Luxembourg

PostPosted: Mon Feb 09, 2004 7:48 am    Post subject: Reply with quote

Sorry guys but I tried to make my own grubsplashimage and my system doesn't seem to have the convert tool installed .. although I installed gimp and so on.
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Mon Feb 09, 2004 10:14 am    Post subject: Reply with quote

latz-twn wrote:
Sorry guys but I tried to make my own grubsplashimage and my system doesn't seem to have the convert tool installed .. although I installed gimp and so on.

Code:
$ qpkg -f `which convert`
media-gfx/imagemagick *

_________________
http://dhruba.name/
Back to top
View user's profile Send private message
ferret
n00b
n00b


Joined: 30 Jul 2003
Posts: 22
Location: Oxford UK

PostPosted: Mon Feb 09, 2004 12:57 pm    Post subject: Reply with quote

Bootsplash patch for 2.6.3-rc1 and above.

http://users.ox.ac.uk/~worc1588/junk/bootsplash-kernel-2.6.3.patch

As of 2.6.3-rc1, udev users can use
bootsplash with no extra setup. :)
Back to top
View user's profile Send private message
latz-twn
Tux's lil' helper
Tux's lil' helper


Joined: 08 Nov 2003
Posts: 95
Location: Luxembourg

PostPosted: Mon Feb 09, 2004 3:11 pm    Post subject: Reply with quote

thx
Narada .. haven't really been thinking about using qpkg .. thx
Back to top
View user's profile Send private message
dshook
n00b
n00b


Joined: 22 Aug 2003
Posts: 35

PostPosted: Sun Feb 15, 2004 2:23 am    Post subject: NVidia GeForce2 Reply with quote

For any NVidia card owners:

I couldn't get a bootsplash image and when I tried I was getting a blank screen. I managed to resolve this issue by removing agpart (character devices) from my kernel config and specifying Option "NvAGP" "1" in my XF86Config file.
Back to top
View user's profile Send private message
Kow
Apprentice
Apprentice


Joined: 28 Dec 2003
Posts: 227

PostPosted: Wed Feb 18, 2004 11:21 pm    Post subject: Reply with quote

Note that with the 2.6.3 release you get the fb.h failing again because it looks like they added a few things right around where the bootsplash config hunk needs to be added... im working on an update to the patch right now,

Its my first time doing a patch so its fun. :)

Im at the point of testing it, and cleaning up (at this point the patchfile is creating all the .orig's from the original patch, forgot to move them when i updated the kernel tree... oops :)
_________________
-Kow
Back to top
View user's profile Send private message
snakattak3
Guru
Guru


Joined: 11 Dec 2002
Posts: 468
Location: Seattle

PostPosted: Wed Feb 18, 2004 11:28 pm    Post subject: Reply with quote

Kow wrote:
Note that with the 2.6.3 release you get the fb.h failing again because it looks like they added a few things right around where the bootsplash config hunk needs to be added... im working on an update to the patch right now,

Its my first time doing a patch so its fun. :)

Im at the point of testing it, and cleaning up (at this point the patchfile is creating all the .orig's from the original patch, forgot to move them when i updated the kernel tree... oops :)

Great. I noticed that this morning when I tried it with mm-sources 2.6.3.
_________________
Ban Reality TV!
Adopt an Unanswered Post
Back to top
View user's profile Send private message
Kow
Apprentice
Apprentice


Joined: 28 Dec 2003
Posts: 227

PostPosted: Thu Feb 19, 2004 12:35 am    Post subject: Reply with quote

Bad News, 2.6.3 release has changed around the fb.h (framebuffer code) a lot and freezes the computer when the bootsplash screen loads up upon boot... The bootsplash code itself will probably have to be changed around to work with 2.6.3, and that is out of my reach.

I have the patch, but there is no point if bootsplash does not work. :?
_________________
-Kow
Back to top
View user's profile Send private message
Kow
Apprentice
Apprentice


Joined: 28 Dec 2003
Posts: 227

PostPosted: Thu Feb 19, 2004 4:00 am    Post subject: Reply with quote

Ok I noticed gentoo-dev-sources is now 2.6.3 and has the bootsplash patch... but my kernel still freezes upon boot... there have been many other ppl complaining about their kernel freezing during the initial boot-up also. I know framebuffering was changed a lot so I'm thinking I might need to change what framebuffer driver I am using (I have a Radeon 9700 Pro and I see that their is a new Radeon FB driver).. I'm going to try this now.
_________________
-Kow
Back to top
View user's profile Send private message
xo
n00b
n00b


Joined: 16 Oct 2003
Posts: 52

PostPosted: Thu Feb 19, 2004 7:05 am    Post subject: a minor improvement to the guide Reply with quote

the line
Code:
/sbin/splash -s -f /etc/bootsplash/default/config/bootsplash-1280x1024.cfg > /boot/initrd-1280x1024

will clobber any existing image.

for users that alreay have an initrd (perhaps they need to boot off somewhere unusual) the line should be:
Code:
/sbin/splash -s -f /etc/bootsplash/default/config/bootsplash-1280x1024.cfg >> /boot/exisitng-initrd


note the double >> which means append
_________________
TyanTigerMP | GeForce2MX200 | AudigyPlatinum | PromiseUltra100TX2 | Realtek8139
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Thu Feb 19, 2004 1:50 pm    Post subject: Reply with quote

A link to the bootsplash patch for kernel 2.6.3 as made by spock is now available from the original article. If anyone is unsure about how to apply the patch just post a message and I'll explain.
_________________
http://dhruba.name/
Back to top
View user's profile Send private message
Mayhem
n00b
n00b


Joined: 24 May 2003
Posts: 70
Location: Spijkenisse, the Netherlands

PostPosted: Thu Feb 19, 2004 8:48 pm    Post subject: Reply with quote

Bootsplash 0.6-r8 is in portage and it should patch 2.6.3 kernels.
_________________
I laugh in the face of danger... Then i hide until it goes away.
Back to top
View user's profile Send private message
KingPunk
Guru
Guru


Joined: 22 Jan 2004
Posts: 442
Location: Utica, New York, USA

PostPosted: Sat Feb 21, 2004 8:52 pm    Post subject: Reply with quote

ok, i've been scouring the forums in search of how to do this bootsplash.
i love how it looks, and have wanted it for ages. every time i try to set it up, i give up on it,
because its always such a pain for me, and i can't seem to figure out why.
however, it still doesn't work.
i (at the moment) am running the gentoo-sources 2.4.22-r7 kernel, patched with the bootsplash
support. i have bootsplash emerged and installed too. it also has been added via rc-update.
and yet, i still see no bootsplash. and its making me oh so sad :(

this is my grub.conf/menu.lst:
Code:
default 0
timeout 10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz

title=Gentoo Linux (1024x768)
root (hd0,0)
kernel (hd0,0)/boot/bzImage root=/dev/hda3 splash=verbose hdc=ide-scsi vga=0x317
#video=mtrr,vesa:1024x768
video=vesa:1024x768@72
initrd=(hd0,0)/initrd-1024x768


this is my kernel config:
http://www.geocities.com/joshua_r_myers/2.4.22-r7-config.txt

and this is my dmesg: (please excuse how much space it takes :s)
Code:

Linux version 2.4.22-gentoo-r7 (root@cdimage) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #1 Fri Feb 20 10:33:31 EST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000013000000 (usable)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
304MB LOWMEM available.
On node 0 totalpages: 77824
zone(0): 4096 pages.
zone(1): 73728 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda3 splash=verbose hdc=ide-scsi vga=0x317
bootsplash: verbose mode.
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1659.209 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3284.99 BogoMIPS
Memory: 303616k/311296k available (2611k kernel code, 7292k reserved, 331k data, 144k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU:             Common caps: 0383f9ff c1c3f9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 2000+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.4b [Flags: R/O].
sisfb: Video ROM found and mapped to c00c0000
sisfb: Framebuffer at 0xc0000000, mapped to 0xd381e000, size 16384k
sisfb: MMIO at 0xcfee0000, mapped to 0xd481f000, size 128k
sisfb: Memory heap starting at 8192K

sisfb: CRT1 DDC probing failed
sisfb: Mode is 800x600x8 (60Hz)
sisfb: Initial vbflags 0x0
sisfb: Added MTRRs
Console: switching to colour frame buffer device 100x37
sisfb: Installed SISFB_GET_INFO ioctl (80046ef8)
sisfb: 2D acceleration is enabled, scrolling mode ypan
fb0: SIS 730 frame buffer device, Version 1.6.11
sisfb: (C) 2001-2003 Thomas Winischhofer. All rights reserved.
vesafb: abort, cannot reserve video memory at 0xc0000000
vesafb: framebuffer at 0xc0000000, mapped to 0xd4840000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at cbca:0004
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb1: VESA VGA frame buffer device
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
sis900.c: v1.08.06 9/24/2002
PCI: Found IRQ 11 for device 00:01.1
PCI: Sharing IRQ 11 with 00:0b.0
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:07:95:5e:3d:e3.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 248M
agpgart: Detected SiS 730 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] AGP 0.99 Aperture @ 0xd0000000 64MB
[drm] Initialized sis 1.0.0 20010503 on minor 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS730 ATA 100 (1st gen) controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: MAXTOR 4K040H2, ATA DISK drive
hdb: Maxtor 6Y120L0, ATA DISK drive
blk: queue c0182500, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c018263c, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
hdd: WDC WD800JB-00CRA1, ATA DISK drive
blk: queue c0182a8c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 78198750 sectors (40037 MB) w/2000KiB Cache, CHS=4867/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
hdd: attached ide-disk driver.
hdd: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hdc: attached ide-scsi driver.
Partition check:
 /dev/ide/host0/bus0/target0/lun0:<7>ldm_validate_partition_table(): Found an MS-DOS partition table, not a dynamic disk.
 p1 p2 p3 p4
 /dev/ide/host0/bus0/target1/lun0:<7>ldm_validate_partition_table(): Found an MS-DOS partition table, not a dynamic disk.
 p1 p2
 /dev/ide/host0/bus1/target1/lun0:<7>ldm_validate_partition_table(): Found an MS-DOS partition table, not a dynamic disk.
 [PTBL] [9729/255/63] p1
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: LITE-ON   Model: LTR-52246S        Rev: 6S07
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
es1371: version v0.32 time 10:34:58 Feb 20 2004
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 10:35:01 Feb 20 2004
PCI: Found IRQ 11 for device 00:01.4
trident: SiS 7018 PCI Audio found at IO 0xd800, IRQ 11
ac97_codec: AC97  codec, id: CMI65 (CMedia)
AC97 codec does not have proper volume support.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 3 for device 00:01.3
PCI: Sharing IRQ 3 with 00:01.2
host/usb-ohci.c: USB OHCI at membase 0xd4b5b000, IRQ 3
host/usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF d2e99f00, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: d4b5b000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d2e99f00
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
PCI: Found IRQ 3 for device 00:01.2
PCI: Sharing IRQ 3 with 00:01.3
host/usb-ohci.c: USB OHCI at membase 0xd4b5d000, IRQ 3
host/usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF d2e7e2c0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: d4b5d000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d2e7e2c0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.8
klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15)
klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
ipsec_aes_init(alg_type=15 alg_id=12 name=aes): ret=0
ipsec_aes_init(alg_type=14 alg_id=9 name=aes_mac): ret=0
ipsec_blowfish_init(alg_type=15 alg_id=7 name=blowfish): ret=0
ipsec_cast_init(alg_type=15 alg_id=6 name=cast): ret=0
ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0
ipsec_serpent_init(alg_type=15 alg_id=252 name=serpent): ret=0
ipsec_sha2_init(alg_type=14 alg_id=5 name=sha2_256): ret=0
ipsec_sha2_init(alg_type=14 alg_id=7 name=sha2_512): ret=0
ipsec_twofish_init(alg_type=15 alg_id=253 name=twofish): ret=0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
systrace: systrace initialized
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Freeing initrd memory: 40k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 144k freed
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: new USB device 00:01.2-1, assigned address 2
usb.c: kmalloc IF d2e7ea80, numif 1
usb.c: new device strings: Mfr=0, Product=1, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Product: Camera
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x46d/0x870) is not claimed by any active driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 1.10
  Vendor:Product      = 046d:0870
  MaxPacketSize0      = 8
  NumConfigurations   = 1
  Device version      = 1.00
  Device Class:SubClass:Protocol = ff:ff:ff
    Vendor class
Configuration:
  bLength             =    9
  bDescriptorType     =   02
  wTotalLength        = 0037
  bNumInterfaces      =   01
  bConfigurationValue =   01
  iConfiguration      =   00
  bmAttributes        =   80
  MaxPower            =   90mA

  Interface: 0
  Alternate Setting:  0
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   00
    bNumEndpoints       =   02
    bInterface Class:SubClass:Protocol =   ff:ff:ff
    iInterface          =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   81 (in)
      bmAttributes        =   01 (Isochronous)
      wMaxPacketSize      = 0000
      bInterval           =   01
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   82 (in)
      bmAttributes        =   03 (Interrupt)
      wMaxPacketSize      = 0001
      bInterval           =   10
  Alternate Setting:  1
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   01
    bNumEndpoints       =   02
    bInterface Class:SubClass:Protocol =   ff:ff:ff
    iInterface          =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   81 (in)
      bmAttributes        =   01 (Isochronous)
      wMaxPacketSize      = 03ff
      bInterval           =   01
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   82 (in)
      bmAttributes        =   03 (Interrupt)
      wMaxPacketSize      = 0001
      bInterval           =   10
usb.c: kusbd: /sbin/hotplug add 2
usb.c: kusbd policy returned 0xfffffffe
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
Adding Swap: 514072k swap-space (priority -1)
EXT3 FS 2.4-0.9.19+htree+orlov, 19 August 2002 on ide0(3,3), internal journal
NTFS volume version 3.1.
NTFS volume version 3.1.
eth0: Media Link On 10mbps half-duplex
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19+htree+orlov, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.


i seem to have /sbin/splash
BUT i can't cat /proc/splash , it says it doesn't exist.
if you could help me, i'd greatly appreciate it.
thanks so much!

~KingPunk
_________________
When the FBI/CIA/NSA/FDA/and other three-letter government agencies come looking, you don't know me, you never saw me, never heard of me. get it? got it? good!
also: ALL YOUR POLLITICAL BASE ARE BELONG TO HILLARY IN '08!!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3 ... 9, 10, 11 ... 25, 26, 27  Next
Page 10 of 27

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum