Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
PS3 2.6.21 Kernel ebuild / Controller via Bluetooth
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5, 6  Next  
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
Crymson
Apprentice
Apprentice


Joined: 21 Mar 2004
Posts: 200
Location: Flagstaff, AZ

PostPosted: Mon Aug 20, 2007 1:36 am    Post subject: Reply with quote

Flamie wrote:
now, snes9x won't compile, something about a failing C linkage in global.cpp.

crymson, you patched that on your own, right? mind sharing that patch? :)


I patched it yes, but I could never get it to compile. A posted above said that one of the steps was very memory intensive, so maybe that's why. Unfortunately, I'm in Iraq right now, and don't have access to my PS3. :(

Just give the 1.5 in garlicbreads overlay a try - I don't recall it having the linkage problem. It might just take forever (e.g. overnight) to compile.

Good luck, sorry I couldn't be of more help.
_________________
Knowledge is Power // Power Corrupts // Study Hard // Be Evil
Back to top
View user's profile Send private message
Crymson
Apprentice
Apprentice


Joined: 21 Mar 2004
Posts: 200
Location: Flagstaff, AZ

PostPosted: Mon Aug 20, 2007 1:40 am    Post subject: Reply with quote

assam85 wrote:
next sound
got it to work(!!) by compiling sound in instead of having it as a module
and i couldnt find snd_ps3pf or snd_ps3 in /dev because it doesnt sit there :D (im dumb)


Friggin awesome. Can you post which exact kernel option you built in? (As I said above, I don't have access to my PS3 and I'm going to revisit this thread when I get home and get that bad boy workin!)

Thanks so much!
_________________
Knowledge is Power // Power Corrupts // Study Hard // Be Evil
Back to top
View user's profile Send private message
taris_kah
n00b
n00b


Joined: 30 Dec 2006
Posts: 24
Location: Utah , USA

PostPosted: Sat Aug 25, 2007 6:38 am    Post subject: Reply with quote

I'm quite a n00b when it comes to layman (seems simple enough though.) I have added the overlay into /etc/layman/layman.cfg, but then when I run
Code:
layman -Lk

it just sits there, seemingly indefinitely. Is there a trick to this that I am missing? Or does it just take forever to list?
_________________
A wise man learns from his own mistakes, a truly wise man learns from the mistakes of others.
Back to top
View user's profile Send private message
Hardrive
n00b
n00b


Joined: 14 Sep 2007
Posts: 1

PostPosted: Fri Sep 14, 2007 2:13 am    Post subject: Reply with quote

I know this is just a simple mistake, or me not following the directions correctly or something... I setup Gentoo using this tutorial.

Here, the error will explain itself:
Code:
PS3 ~ # emerge -u =dev-util/dtc-20060419
Calculating dependencies |
emerge: there are no ebuilds to satisfy "=dev-util/dtc-20060419".

PS3 ~ #


Any idea on what I'm doing wrong?
Back to top
View user's profile Send private message
Capcom
n00b
n00b


Joined: 13 Aug 2007
Posts: 23

PostPosted: Fri Sep 21, 2007 8:40 pm    Post subject: Reply with quote

I get an error when I try to Genkernel initrd


Code:
 /var/tmp/genkernel/18144.29955.26967.5290/busybox-1.1.3+gentoo/util-linux/nfsmount.c: In function 'xdr_mountres3_ok':
/var/tmp/genkernel/18144.29955.26967.5290/busybox-1.1.3+gentoo/util-linux/nfsmount.c:1003: warning: dereferencing type-punned pointer will break strict-aliasing rules
--
  CC libbb/perror_nomsg_and_die.o
  CC libbb/print_file.o
  CC libbb/printf.o
  CC libbb/process_escape_sequence.o
  CC libbb/procps.o
/var/tmp/genkernel/18144.29955.26967.5290/busybox-1.1.3+gentoo/libbb/procps.c:15:22: error: asm/page.h: No such file or directory
CC libbb/qmodule.o
make[1]: *** [/var/tmp/genkernel/18144.29955.26967.5290/busybox-1.1.3+gentoo/libbb/procps.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** wait: No child processes.  Stop.
make: *** [all] Error 2
* Gentoo Linux Genkernel; Version 3.4.6
* Running with options: initrd

* ERROR: Failed to compile the "all" target...

* -- End log... --



Can anyone help?
Back to top
View user's profile Send private message
robnotts
Guru
Guru


Joined: 15 Mar 2004
Posts: 405
Location: Nottingham, UK

PostPosted: Fri Sep 21, 2007 10:49 pm    Post subject: Reply with quote

Capcom:

Got exactly the same error, and not yet had time to look around for the problem. I think the file asm/page.h should come from some kernel headers or the kernel source, but am guessing at the moment... unless there is something specific to busybox...

Certainly, the kernel sources have a lot of page.h files in various asm directories...

Will try and get a better look tomorrow (Saturday), unless someone already has a solution?

I would just like to have 64bit kernel/32bit kernel, with the latest 2.6.21 kernel on my PS3, but blocked by this error.
_________________
---

Gentoo Phenom][ X4 955 on AMD790 + Geforce 220GT 8GB/1.75TB (Desktop)
+ MythTV (3xFreeview,1xFreesat HD) on 1080p
Gentoo Turion64 X2 Geforce 6150 2GB/120GB (Laptop)
Back to top
View user's profile Send private message
net-0
Tux's lil' helper
Tux's lil' helper


Joined: 04 Dec 2006
Posts: 103
Location: Lodi, California

PostPosted: Sat Sep 29, 2007 2:26 am    Post subject: Reply with quote

Man I have been going kind of crazy trying to figure this out....

I just want to get this working so bad.... I would be happy getting it to work wired for the time being but I can't even get it to do that.

I'm so confused with patching.... I read the man page on it... and it says to type patch (Original File) (Patch) and I have been trying this.... I just don't understand what to patch.... I have been browsing this thread for like a few hours just trying randomness since I don't really understand.

For some reason when I trying to use or find hidd it doesn't exist either.... I do however see the controller trying to connect when I view the log... and I even notice the lights on the controller flashing for like a second.... here is the log for the tool.

Code:
localhost ~ # hcidump -V -x
HCI sniffer - Bluetooth packet analyzer ver 1.40
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
    bdaddr 00:19:C1:8B:24:93 class 0x000508 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
    bdaddr 00:19:C1:8B:24:93 role 0x01
    Role: Slave
> HCI Event: Command Status (0x0f) plen 4
    Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 43 bdaddr 00:19:C1:8B:24:93 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 43
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:19:C1:8B:24:93 mode 1
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
> ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 17 scid 0x0040
< ACL data: handle 43 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
      Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
    handle 43 policy 0x0f
    Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
    Write Link Policy Settings (0x02|0x000d) ncmd 1
    status 0x00 handle 43
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
    handle 43 ptype 0xcc18
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Change Connection Packet Type (0x01|0x000f) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:19:C1:8B:24:93 mode 2 clkoffset 0x0000
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
    status 0x00 handle 43 ptype 0x3318
    Packet type: DM1 DH1 2-DH3 2-DH5 3-DH3 3-DH5
> HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 43
    Features: 0xfc 0x07 0x82 0x7e 0x08 0x18 0x00 0x80
> HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:19:C1:8B:24:93 name 'PLAYSTATION(R)3 Controller'
> ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 43 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 672
< ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
> ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 19 scid 0x0041
< ACL data: handle 43 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
      Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 36
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 24
      QoS 0x02 (Guaranteed)
< ACL data: handle 43 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
      Success
      MTU 672
< ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
      Success
< ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 43 packets 1
> ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
< HCI Command: Disconnect (0x01|0x0006) plen 3
    handle 43 reason 0x13
    Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
    Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 43 reason 0x16
    Reason: Connection Terminated by Local Host


I know it's probably because I didn't use the patch... but then again I don't totally understand the process however when I do have it connected wired... it does make a /dev/input/js0 but I'm going nuts trying to find a solution.... I think Im going to start fresh.... I want the 64bit version install anyways... but if some on could enlighten me on the process or just link me to updated information... I would be greatly appreciative.

These are my current resources, aside from this thread of course.

http://ps3.jim.sh/sixaxis/usb/
http://www.pabr.org/sixlinux/sixlinux.en.html
http://forum.beyond3d.com/showthread.php?t=44215

and a few more.... mostly from within the forum.

Thanks for all the help,

--neto
_________________
We built this city on swedish melodic death metal.
Back to top
View user's profile Send private message
garlicbread
Apprentice
Apprentice


Joined: 06 Mar 2004
Posts: 182

PostPosted: Fri Oct 05, 2007 12:09 pm    Post subject: Reply with quote

I'm in the process of updating the overlay on layman at the moment
I've got 2.6.23 working which seems to be a lot better than 2.6.21
also I've got an updated ebuild for dtc to build the kernel (we're now at 1.0.0)

However I've not added this into the overlay yet
as I'm still in the process of going through some of the other ebuilds for bluetooth etc to check (also to update the kernel to rc9)
and to see if everything still works with it updated (snes9x X etc)

I've only used a 64bit system so far, so I can't comment on how this overlay will work under 32bit
but one of the things to be aware of is that the default config for building the PS3 kernel defaults to 64bit
so you'll need to alter the .config configuation using make menuconfig to select a 32bit kernel if one is needed

since I keep seeing the same questions asked on the thread I'm also trying to get something onto my web page as well to describe the setup a bit clearer
Back to top
View user's profile Send private message
cancech
Apprentice
Apprentice


Joined: 22 Dec 2004
Posts: 171

PostPosted: Fri Oct 12, 2007 12:26 am    Post subject: Reply with quote

I'm trying to follow your instructions, and I got to the point where I'm supposed to be emerge everything. As things are right now, the website from which I'm supposed to download the DTC tarball is down, and I haven't been able to find a different location to download from. I found a newer version, but that's about it. Would you (or someone for that matter) happen to have a copy hidden away somewhere which you could post somewhere and allow me to download it?

Thanks!!
Back to top
View user's profile Send private message
luchoh
n00b
n00b


Joined: 17 Dec 2006
Posts: 3

PostPosted: Mon Oct 15, 2007 12:11 am    Post subject: Reply with quote

Hardrive wrote:
I know this is just a simple mistake, or me not following the directions correctly or something... I setup Gentoo using this tutorial.

Here, the error will explain itself:
Code:
PS3 ~ # emerge -u =dev-util/dtc-20060419
Calculating dependencies |
emerge: there are no ebuilds to satisfy "=dev-util/dtc-20060419".

PS3 ~ #


Any idea on what I'm doing wrong?


I hope you figured it out already. In case you haven't (and for the rest that may ask - Garlicbread, maybe you should update your guide?)


Code:
echo "source /usr/portage/local/layman/make.conf" >> /etc/make.conf


For details, check this URL: http://gentoo-wiki.com/TIP_Overlays#Introduction
Back to top
View user's profile Send private message
luchoh
n00b
n00b


Joined: 17 Dec 2006
Posts: 3

PostPosted: Mon Oct 15, 2007 9:01 am    Post subject: Reply with quote

cancech wrote:
I'm trying to follow your instructions, and I got to the point where I'm supposed to be emerge everything. As things are right now, the website from which I'm supposed to download the DTC tarball is down, and I haven't been able to find a different location to download from. I found a newer version, but that's about it. Would you (or someone for that matter) happen to have a copy hidden away somewhere which you could post somewhere and allow me to download it?

Thanks!!


I'm in the same boat. Please advise.
Back to top
View user's profile Send private message
DEaigo
n00b
n00b


Joined: 15 Apr 2004
Posts: 74
Location: oooweee Brisbane

PostPosted: Sat Oct 20, 2007 5:01 am    Post subject: Reply with quote

Code:

>>> Downloading 'http://dtc.ozlabs.org/snapshots/dtc-20060419.tar.gz'
--15:08:02--  http://dtc.ozlabs.org/snapshots/dtc-20060419.tar.gz
           => `/usr/portage/distfiles/dtc-20060419.tar.gz'
Resolving dtc.ozlabs.org... failed: Name or service not known.
!!! Couldn't download 'dtc-20060419.tar.gz'. Aborting.
 * Fetch failed for 'dev-util/dtc-20060419'

 * Messages for package dev-util/dtc-20060419:

 * Fetch failed for 'dev-util/dtc-20060419'


dammit :(

anyone wanna give me theirs?
Back to top
View user's profile Send private message
garlicbread
Apprentice
Apprentice


Joined: 06 Mar 2004
Posts: 182

PostPosted: Sun Oct 21, 2007 12:18 pm    Post subject: Reply with quote

it's moved to http://www.jdl.com/
http://www.jdl.com/software/dtc-1.0.0.tgz
Back to top
View user's profile Send private message
DEaigo
n00b
n00b


Joined: 15 Apr 2004
Posts: 74
Location: oooweee Brisbane

PostPosted: Mon Oct 22, 2007 2:51 am    Post subject: Reply with quote

garlicbread wrote:
I'm in the process of updating the overlay on layman at the moment
I've got 2.6.23 working which seems to be a lot better than 2.6.21
also I've got an updated ebuild for dtc to build the kernel (we're now at 1.0.0)

However I've not added this into the overlay yet
as I'm still in the process of going through some of the other ebuilds for bluetooth etc to check (also to update the kernel to rc9)
and to see if everything still works with it updated (snes9x X etc)

I've only used a 64bit system so far, so I can't comment on how this overlay will work under 32bit
but one of the things to be aware of is that the default config for building the PS3 kernel defaults to 64bit
so you'll need to alter the .config configuation using make menuconfig to select a 32bit kernel if one is needed

since I keep seeing the same questions asked on the thread I'm also trying to get something onto my web page as well to describe the setup a bit clearer


i might just hold out for the updated version
Back to top
View user's profile Send private message
ogopogo
n00b
n00b


Joined: 05 Sep 2007
Posts: 3

PostPosted: Mon Oct 22, 2007 7:58 pm    Post subject: Reply with quote

garlicbread wrote:
I'm in the process of updating the overlay on layman at the moment
I've got 2.6.23 working which seems to be a lot better than 2.6.21
also I've got an updated ebuild for dtc to build the kernel (we're now at 1.0.0)

However I've not added this into the overlay yet
as I'm still in the process of going through some of the other ebuilds for bluetooth etc to check (also to update the kernel to rc9)
and to see if everything still works with it updated (snes9x X etc)

I've only used a 64bit system so far, so I can't comment on how this overlay will work under 32bit
but one of the things to be aware of is that the default config for building the PS3 kernel defaults to 64bit
so you'll need to alter the .config configuation using make menuconfig to select a 32bit kernel if one is needed

since I keep seeing the same questions asked on the thread I'm also trying to get something onto my web page as well to describe the setup a bit clearer


I'm looking forward to an updated guide. By the way, whats your webpage?

Thanks,
- Ogo
Back to top
View user's profile Send private message
Capcom
n00b
n00b


Joined: 13 Aug 2007
Posts: 23

PostPosted: Sun Oct 28, 2007 5:29 pm    Post subject: Reply with quote

robnotts wrote:
Capcom:

Got exactly the same error, and not yet had time to look around for the problem. I think the file asm/page.h should come from some kernel headers or the kernel source, but am guessing at the moment... unless there is something specific to busybox...

Certainly, the kernel sources have a lot of page.h files in various asm directories...

Will try and get a better look tomorrow (Saturday), unless someone already has a solution?

I would just like to have 64bit kernel/32bit kernel, with the latest 2.6.21 kernel on my PS3, but blocked by this error.


Did you ever find a solution to the Genkernel initrd error?
Back to top
View user's profile Send private message
DEaigo
n00b
n00b


Joined: 15 Apr 2004
Posts: 74
Location: oooweee Brisbane

PostPosted: Fri Nov 09, 2007 2:56 pm    Post subject: Reply with quote

what's news?
Back to top
View user's profile Send private message
garlicbread
Apprentice
Apprentice


Joined: 06 Mar 2004
Posts: 182

PostPosted: Tue Nov 13, 2007 12:04 am    Post subject: Reply with quote

I'm getting to it :D
I've just spent the weekend updating most of my machines with emerge -up --deep --newuse world and revdep-rebuild

I've just uploaded a partial update to the overlay for dtc mostly
although some of the other stuff such as snes9x I haven't tried out yet, just copied fresh from bugzilla

I still need to re-update sys-kernel again since these still date prior to the official release of 2.6.23
also I've jiggled around the package names
(I want to see if I can use the gentoo patches)
there's also a newer version of bluezutils that I need to check out in the official tree to see how it's been patched

the ebuild in ps3-git-sources "ps3-git-sources-9999" is masked by default
but you can just add it to /etc/portage/package.keywords/ if you want to use it
it should auto cone the git tree to /usr/portage/distfiles/ (note this can be quite big) then install under /usr/src/
for the others in sys-kernel I'd leave these for now, since I might need to change the names / update them anyway
Back to top
View user's profile Send private message
siliziumleben
n00b
n00b


Joined: 13 Nov 2007
Posts: 2

PostPosted: Tue Nov 13, 2007 1:44 pm    Post subject: Reply with quote

I'm also waiting for an update.
Need newest kernel so i can use controller's in freevo, as i now have patched high-speed-mplayer =)
Back to top
View user's profile Send private message
garlicbread
Apprentice
Apprentice


Joined: 06 Mar 2004
Posts: 182

PostPosted: Mon Nov 19, 2007 12:53 am    Post subject: Reply with quote

I've just made an update to the kernel

sys-kernel/ps3-git-sources
this now represents the vanilla tree + ps3 patches
1. ps3-git-sources-2.6.23.8
this is the latest stable kernel with the ps3 patch-set
the last patch included is commit 311a4cbaeffbcc7d963a3dd61e2dfc3cef7daa83
labeled as "Merge in Geert's video 'safe mode'"
all the later ps3 patches appear to be against the 2.6.24 series
(I haven't tried to back port these, probably best to just to wait for 2.6.24)

2. ps3-git-sources-2.6.24_rc3
prepatch version of the linux kernel with the latest ps3 patch-set
this one's probably a bit unstable but untested

3. ps3-git-sources-9999
direct git pull from the ps3 git tree

sys-kernel/ps3-garlicbread-sources
kernel 2.6.23.8 + gentoo patch set (including squashfs) + ps3 patch + UDF patch
1. ps3-garlicbread-sources-2.6.23
same as git-sources but with added bits (gentoo + udf)
this is the one I'm using at the moment

I've only just put this up so I still haven't had time to test this properly yet
but I think the 2.6.23.8 build appears to be okay
(I wonder if uvesafb will work?)
Back to top
View user's profile Send private message
ghutzl
Tux's lil' helper
Tux's lil' helper


Joined: 29 May 2005
Posts: 119
Location: Germany

PostPosted: Sat Dec 29, 2007 5:07 pm    Post subject: Reply with quote

Hello!

I am trying to compile the garlicbread kernel: sys-kernel/ps3-garlicbread-sources-2.6.23.

I have the following compile problem:

Code:
  CC      arch/powerpc/platforms/cell/spu_callbacks.o
In file included from arch/powerpc/platforms/cell/spu_callbacks.c:7:
include/linux/kallsyms.h: In function 'kallsyms_lookup':
include/linux/kallsyms.h:56: error: 'NULL' undeclared (first use in this function)
include/linux/kallsyms.h:56: error: (Each undeclared identifier is reported only once
include/linux/kallsyms.h:56: error: for each function it appears in.)
make[2]: *** [arch/powerpc/platforms/cell/spu_callbacks.o] Error 1
make[1]: *** [arch/powerpc/platforms/cell] Error 2
make: *** [arch/powerpc/platforms] Error 2


Any help?
Back to top
View user's profile Send private message
garlicbread
Apprentice
Apprentice


Joined: 06 Mar 2004
Posts: 182

PostPosted: Sat Jan 12, 2008 11:02 am    Post subject: Reply with quote

I'm not sure if your using a 32bit or 64bit system (this has only been tried on 64bit)
but you could try disabling the spu support under the ps3 options in the kernel config (it looks like something spu related)
I'm curently waiting for 2.6.24 to be out proper before trying another update
Back to top
View user's profile Send private message
hiphoprisy
n00b
n00b


Joined: 24 Jan 2007
Posts: 3

PostPosted: Mon Jan 14, 2008 1:57 pm    Post subject: Reply with quote

Hello,

I have stared at the 1st post for hours now trying to figure out what to do after the layman code. The Code boxes just kind of stopped. I would like the 2.6.23 kernel with UDF patches and bluetooth. Could somebody please help me out. I have gentoo installed with 2.6.23 kernel but with no patches.

Thank You
Back to top
View user's profile Send private message
styggentorsken
n00b
n00b


Joined: 05 Jul 2007
Posts: 22

PostPosted: Tue Jan 15, 2008 12:27 am    Post subject: Reply with quote

hiphoprisy,
I'm not sure of all these things, but it might help you:
First, remeber to do (i addition to that from the first post)

Code:
echo "source /usr/portage/local/layman/make.conf" >> /etc/make.conf


and then

Code:
emerge --sync    (obviously, but I forgot this one for a few hours)


then something like

Code:
emerge ps3-garlicbread-sources

(depending on wich kernel you want)

and then, to compile the kernel with the right options set, (I'm a genkernel user, and I haven't got this far yet)

After that I think this will explain a few things. (Again, I haven't got this far yet, still downloading the sources)

http://www.pabr.org/sixlinux/sixlinux.en.html
Back to top
View user's profile Send private message
hiphoprisy
n00b
n00b


Joined: 24 Jan 2007
Posts: 3

PostPosted: Tue Jan 15, 2008 2:11 am    Post subject: Reply with quote

Thanks for the help, will try later when I get home.

I did find that using "make ps3_defconfig" will set all the correct kernel options for you and then "make menuconfig" is optional after that.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6  Next
Page 5 of 6

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum