Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Problem with new System... Kernel
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
sewulba
Guru
Guru


Joined: 09 Feb 2005
Posts: 497
Location: Heidelberg

PostPosted: Thu Apr 10, 2008 2:07 pm    Post subject: Problem with new System... Kernel Reply with quote

Hi...

I have installed a absolute new Gentoo 2007.0 PPC64-970-64ul System on my PowerMac Dual G5 2,7GHz. I use Kernel 2.6.24-gentoo-r3.
When I want to start my new System, I only got the message 'fixing up bogus interrupts for u3 i2c...'
What have I made wrong???

Sewulba :oops:
_________________
System1:Apple PowerMac Dual G4 @ 1,83GHz with 2GB Ram. 400GB + 80GB HDD, Gentoo 13.0-ppc32
System2:Apple MacIntosh PowerMac Dual G5 @ 2.7 GHz/1,35GHz FSB... 8GB Ram. 250GB SATA. Gentoo 10.0-PPC64-64ul
Back to top
View user's profile Send private message
Icethepenguin
Apprentice
Apprentice


Joined: 01 Nov 2003
Posts: 252
Location: Loganville, Ga

PostPosted: Thu Apr 10, 2008 11:49 pm    Post subject: Reply with quote

I may be way off, but isn't "i2c" a sensor used in ksensors/gkrellm?

I know its a program that you download when you emerge gkrellm/ksensors.

this may be no help at all but I tried.
_________________
Sometimes you have to take that leap, then build your wings on the way down.
Back to top
View user's profile Send private message
FrankRizz0
l33t
l33t


Joined: 29 Nov 2006
Posts: 617

PostPosted: Fri Apr 11, 2008 1:53 am    Post subject: Reply with quote

I2C is in your kernel config. If you use genkernel, type genkernel --menuconfig all, and then proceed to Device Drivers, you'll find it in there. If you config your kernel manually, type cd /usr/src/linux then make menuconfig and proceed the same way. Hope this helps!!!
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Sat Apr 12, 2008 4:58 pm    Post subject: Reply with quote

It sounds like you forgot to include support for your graphics adapter, make sure that you've compiled in support for a framebuffer and the video card, otherwise, you'll get no inital console.
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
sewulba
Guru
Guru


Joined: 09 Feb 2005
Posts: 497
Location: Heidelberg

PostPosted: Sun Apr 13, 2008 1:54 pm    Post subject: Reply with quote

JoseJX wrote:
It sounds like you forgot to include support for your graphics adapter, make sure that you've compiled in support for a framebuffer and the video card, otherwise, you'll get no inital console.


Yes, that was it.
I have taken the config.gz from the liveCD and optimized to my machine. It runs fine in PPC64-64ul!
Thnx. :wink:

Sewulba
_________________
System1:Apple PowerMac Dual G4 @ 1,83GHz with 2GB Ram. 400GB + 80GB HDD, Gentoo 13.0-ppc32
System2:Apple MacIntosh PowerMac Dual G5 @ 2.7 GHz/1,35GHz FSB... 8GB Ram. 250GB SATA. Gentoo 10.0-PPC64-64ul
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum