Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
KDE4 Overlay (Part 6)
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 20, 21, 22 ... 26, 27, 28  Next  
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
Berniyh
l33t
l33t


Joined: 07 Jun 2006
Posts: 677

PostPosted: Fri Jul 11, 2008 2:02 am    Post subject: Reply with quote

wrc1944 wrote:
Berniyh wrote:
Quote:
The best solution if you want to use modified sets, is to create a copy and put that in /etc/paludis/sets.
Maybe you want to rename it to, to prevent confusion, but if the name is the same, the set in /etc/paludis/sets overrides the overlay's one.
As we discussed earlier, I followed your recommendation and didn't use sets in /etc/paludis. Nepomuk and digikam kept failing, so many weeks ago I finally just commented them out in the overlay sets files since there were only two. I wanted to keep it simple, and not have to deal with sets over-rides at that time. Besides, at that time nepomuk-sever kept using 99% of the cpu, making kdesvn unusable.

However, as mentioned above, apparently commenting out packages in the overlay sets now prevents syncing of the overlay. After uncommenting them in order to sync, nepomuck of course showed up in "genkdesvn all" list, but now fails because it can't find itself, whicb seems weird. In other words, it won't install because it can't find itself already installed?? :roll:

Well yes, but if you change the overlay files, you will have problems, when git tries to pull. Anyway, "git reset --hard HEAD" in the overlay's dir will fix that.


Quote:
Or is it only the "tests not found" that's causing it to fail? This comes after configure runs on paludis -ip1 kde-base-nepomuk
Code:
-----------------------------------------------------------------------------               
-- The following OPTIONAL packages could NOT be located on your system.                     
-- Consider installing them to enable more features from this software.                     
+ Nepomuk: Nepomuk Libraries <kdelibs>                                                       
Required to build Nepomuk.                                                                   
-----------------------------------------------------------------------------               
-- Configuring done
-- Generating done
-- Build files have been written to: /var/tmp/paludis/kde-base-nepomuk-scm/work/nepomuk_build
make -j2                                                                                     
 * >>> Test phase [test]: kde-base/nepomuk-scm                                               
make -j2 -j1 test                                                                           
Running tests...                                                                             
Start processing tests                                                                                 
Test project /var/tmp/paludis/kde-base-nepomuk-scm/work/nepomuk_build                                   
No tests were found!!!                                                                                 
>>> Done src_test                                                                                       
>>> Starting builtin_saveenv                                                                           
>>> Done builtin_saveenv                                                                               
>>> Completed ebuild phases loadenv test saveenv                                                       
>>> Running ebuild phases loadenv install saveenv as root:root...                                       
>>> Starting builtin_loadenv                                                                           
>>> Done builtin_loadenv                                                                               
>>> Starting src_install                                                                               
make -j2 install DESTDIR=/var/tmp/paludis/kde-base-nepomuk-scm/image/                                   
make: *** No rule to make target `install'.  Stop.                                                     

!!! ERROR in kde-base/nepomuk-scm:
!!! In cmake-utils_src_install at line 1153
!!! Make install failed                   

!!! Call stack:
!!!    * cmake-utils_src_install (/var/tmp/paludis/kde-base-nepomuk-scm/temp/loadsaveenv:1153)
!!!    * kde4-meta_src_install (/var/tmp/paludis/kde-base-nepomuk-scm/temp/loadsaveenv:3523) 
!!!    * src_install (/var/tmp/paludis/kde-base-nepomuk-scm/temp/loadsaveenv:4384)           
!!!    * ebuild_f_install (/usr/libexec/paludis/0/src_install.bash:46)                       
!!!    * ebuild_main (/usr/libexec/paludis/ebuild.bash:460)                                   
!!!    * main (/usr/libexec/paludis/ebuild.bash:479)                                         

diefunc: making ebuild PID 14292 exit with error
die trap: exiting with error.                   

Install error:
  * In program paludis -i1 genkdesvn-all --dl-reinstall-targets always:
  * When performing install action from command line:                 
  * When executing install task:                                       
  * When installing 'kde-base/nepomuk-scm:kde-svn::kde4-experimental':
  * Install error: Install failed for 'kde-base/nepomuk-scm:kde-svn::kde4-experimental'

Summary of failures:
* kde-base/nepomuk-scm:kde-svn::kde4-experimental: failure

Total: 122 packages, 96 successes, 0 skipped, 1 failure, 25 unreached
I did notice during my genkdesvn update today many packages wanted nepokuk as an optional package for more features. If I can get nepomuk installed with --checks none, I guess I'll need another complete rebuild. :roll:

This is somewhat strange. Not because of the error message (it means, that you have to install kdelibs with the semantic-desktop useflag turned on), but because you shouldn't run into that, because nepomuk use depends on that set up (so it shouldn't try to install at all if that use flag is not set for kdelibs).

Regarding the cpu usage of nepomuk/strigi, I do see that, too, but I wouldn't bother too much about that, since there might be changes in nepomuk soon. (Heard something like that.)
If it goes on your nerves, just turn nepomuk off, in systemsettings and kill the process (if it is still running then).
Back to top
View user's profile Send private message
wrc1944
Advocate
Advocate


Joined: 15 Aug 2002
Posts: 3234
Location: Gainesville, Florida

PostPosted: Fri Jul 11, 2008 4:07 am    Post subject: Reply with quote

Berniyh,
Thanks very much for the info. I'll proceed accordingly. :)

I think my probable mistake was setting -semantic-desktop globally, as well as for kdebase. I'll correct this before my next "genkdesvn all" rebuild, and see if that sorts this out, and just turn off semantic desktop in system settings afterwards.
_________________
Main box- AsRock x370 Gaming K4
Ryzen 1700, 3.0GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
Gentoo ~amd64 plasma, glibc-2.29-r2, gcc-9.1.0 kernel-5.1.12-gentoo USE=experimental
Back to top
View user's profile Send private message
StifflerStealth
l33t
l33t


Joined: 03 Jul 2002
Posts: 968

PostPosted: Fri Jul 11, 2008 4:58 pm    Post subject: Reply with quote

wrc1944 wrote:
After today's genkdesvn all update (all went fine except nepomuk), while updating world three different times I've gotten a KDE Daemon crash dialog box. It doesn't seem to affect anything fuctioning- the update process, firefox, etc. I just close it and things seem normal. Any ideas?
Quote:
A Fatal Error Occurred
The application KDE Daemon (kded4) crashed and caused the signal 11 (SIGSEGV).
Please help us improve the software you use by filing a report at http://bugs.kde.org. Useful details include how to reproduce the error, documents that were loaded, etc.
Details:
Application: KDE Daemon (kded4), signal SIGSEGV

Thread 1 (Thread 0xa6661700 (LWP 3007)):
#0 0xffffe424 in __kernel_vsyscall ()
#1 0xa69dcb80 in nanosleep () from /lib/libc.so.6
#2 0xa69dc9bf in sleep () from /lib/libc.so.6
#3 0xa7b4576c in KCrash::startDrKonqi () from /usr/kde/svn/lib/libkdeui.so.5
#4 0xafdd5f40 in ?? ()
#5 0xafdd8118 in ?? ()
... [snip]
#66 0x00000000 in ?? ()
Since you are using svn code for KDE, I suggest adding the -ggdb compile flag to CFLAGS and CXXFLAGS, and then using "paludis --debug-build split" options to have debugging symbols. This way you can provide a meaningful backtrace to the KDE devs who can tell you the precise problem. :) Currently, it looks like you only have a partial list of debugging symbols, so whatever programs are #4 through #66, need the symbols as well, so look at all your dependencies to see which ones need it and set up a per-package thing, or compile your whole system like that (recommended) since it doesn't take up much space, and you can always delete the external symbols anyways with no harm done to the system if you need the room.

Cheers.
_________________
Nothing to read in this sig. Move along.
Back to top
View user's profile Send private message
StifflerStealth
l33t
l33t


Joined: 03 Jul 2002
Posts: 968

PostPosted: Fri Jul 11, 2008 5:01 pm    Post subject: Reply with quote

wrc1944 wrote:
I think my probable mistake was setting -semantic-desktop globally, as well as for kdebase. I'll correct this before my next "genkdesvn all" rebuild, and see if that sorts this out, and just turn off semantic desktop in system settings afterwards.
What does the "semantic-desktop" flag do anyways? I saw that and just enabled it in the global use flags because I got lazy. Is it beneficial? Would I notice anything different if I disabled it globally?
_________________
Nothing to read in this sig. Move along.
Back to top
View user's profile Send private message
mikkoc
Apprentice
Apprentice


Joined: 24 May 2007
Posts: 231

PostPosted: Fri Jul 11, 2008 5:06 pm    Post subject: Reply with quote

I'm doing just fine with -semantic-desktop disabled globally.
That means no soprano/nepomuk dependencies.
Here's a bit more info on nepomuk: http://nepomuk.kde.org/discover/user
Back to top
View user's profile Send private message
wrc1944
Advocate
Advocate


Joined: 15 Aug 2002
Posts: 3234
Location: Gainesville, Florida

PostPosted: Fri Jul 11, 2008 6:41 pm    Post subject: Reply with quote

Hmmm. Then maybe it isn't a "mistake" to disable semantic-desktop globally. AFAIK, it's like beagle or kerry (or windows file indexing service)- always running in the background dragging performance down. In my case, nepomuk-server was essentially diabling my entire system by taking 99% of the cpu at all times. It was so bad I decided to get rid of it, just like years ago I always did with indexing on windows boxes.

My problem with the blocking of syncing the kde4-experimental overlay seems to be I had nepomuk commented out in the overlay set, and NOT in /etc/paludis/sets, where I should have dealth with it. I don't know if they ever fixed the 99% cpu usage problem, but even ifthey did I have no real use for semantic-descktop as long as I just have a one core cpu system. It just drains too much performance from one little cpu. I guess with multi-core cpus YMMV, and it might make more sense.

However, from the configure output messages of many packages, nepomuk is desired as an optional package for more "features," by which I guess they mean constant "file indexing" in the bacground. :roll: I don't know why they want this type service- it was never of any real use in windows, and there was no perceptable benefit I ever saw in improving search times for files, or anything else. In theory, it sounds great, but IMO, it's just a bad idea overall, but what do I know? :roll: Maybe it's only for super fast multi-core systems, where it wouldn't affect performance to any noticable degree.
_________________
Main box- AsRock x370 Gaming K4
Ryzen 1700, 3.0GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
Gentoo ~amd64 plasma, glibc-2.29-r2, gcc-9.1.0 kernel-5.1.12-gentoo USE=experimental
Back to top
View user's profile Send private message
Berniyh
l33t
l33t


Joined: 07 Jun 2006
Posts: 677

PostPosted: Fri Jul 11, 2008 8:46 pm    Post subject: Reply with quote

wrc1944 wrote:
Hmmm. Then maybe it isn't a "mistake" to disable semantic-desktop globally. AFAIK, it's like beagle or kerry (or windows file indexing service)- always running in the background dragging performance down. In my case, nepomuk-server was essentially diabling my entire system by taking 99% of the cpu at all times. It was so bad I decided to get rid of it, just like years ago I always did with indexing on windows boxes.

My problem with the blocking of syncing the kde4-experimental overlay seems to be I had nepomuk commented out in the overlay set, and NOT in /etc/paludis/sets, where I should have dealth with it. I don't know if they ever fixed the 99% cpu usage problem, but even ifthey did I have no real use for semantic-descktop as long as I just have a one core cpu system. It just drains too much performance from one little cpu. I guess with multi-core cpus YMMV, and it might make more sense.

However, from the configure output messages of many packages, nepomuk is desired as an optional package for more "features," by which I guess they mean constant "file indexing" in the bacground. :roll: I don't know why they want this type service- it was never of any real use in windows, and there was no perceptable benefit I ever saw in improving search times for files, or anything else. In theory, it sounds great, but IMO, it's just a bad idea overall, but what do I know? :roll: Maybe it's only for super fast multi-core systems, where it wouldn't affect performance to any noticable degree.

You don't actually need to comment it out in the set.
You just have to be careful when using the foo* sets.
That is the advantage of the sets over the meta stuff. You don't have to keep everything installed when using it.
Back to top
View user's profile Send private message
loftwyr
l33t
l33t


Joined: 29 Dec 2004
Posts: 970
Location: 43°38'23.62"N 79°27'8.60"W

PostPosted: Fri Jul 11, 2008 9:27 pm    Post subject: Reply with quote

Is it possible (if not already done) to set the checkout and update scripts to use svn+ssh so that compression can be used? Can I do this myself by setting a flag somewhere?
_________________
My emerge --info
Have you run revdep-rebuild lately? It's in gentoolkit and it's worth a shot if things don't work well.
Celebrating 5 years of Gentoo-ing.
Back to top
View user's profile Send private message
enzobelmont
Guru
Guru


Joined: 06 Apr 2004
Posts: 345
Location: Chiapas, Mexico

PostPosted: Mon Jul 14, 2008 2:32 am    Post subject: Reply with quote

my f***ing svn checkout sometimes gets stuck and i cant control + C to stop it.

this happens on kdebase SVN updates or complete tree retrieve.

any idea??

it is soo annoying.
sorry my english.

PS. i've deleted SVN-SRC complete from distfiles, the result is the same.
_________________
Mens sana in corpore sano... Gentoo laetificat cor hominis
Back to top
View user's profile Send private message
Dagger
Retired Dev
Retired Dev


Joined: 11 Jun 2003
Posts: 765
Location: UK

PostPosted: Mon Jul 14, 2008 9:36 am    Post subject: Reply with quote

As I understand there is no way to switch from KDE trunk to 4.1 branch without modifying kde4svn.eclass files.

Berniyh would it be possible to modify eclass to accept extra value which would override default trunk? It could be provided in sets file or ENV.
_________________
95% of all computer errors occur between chair and keyboard (TM)
Join the FSF as an Associate Member!
Post under CC license.
Back to top
View user's profile Send private message
Berniyh
l33t
l33t


Joined: 07 Jun 2006
Posts: 677

PostPosted: Mon Jul 14, 2008 10:23 am    Post subject: Reply with quote

enzobelmont wrote:
my f***ing svn checkout sometimes gets stuck and i cant control + C to stop it.

this happens on kdebase SVN updates or complete tree retrieve.

any idea??

it is soo annoying.
sorry my english.

PS. i've deleted SVN-SRC complete from distfiles, the result is the same.

131.174.31.25 anonsvn.kde.org

put that (or any other anonsvn host, that works for you in your hosts file.
Back to top
View user's profile Send private message
Berniyh
l33t
l33t


Joined: 07 Jun 2006
Posts: 677

PostPosted: Mon Jul 14, 2008 10:26 am    Post subject: Reply with quote

Dagger wrote:
As I understand there is no way to switch from KDE trunk to 4.1 branch without modifying kde4svn.eclass files.

Berniyh would it be possible to modify eclass to accept extra value which would override default trunk? It could be provided in sets file or ENV.

There could be, the problem is, that it might need different fixes and we certainly won't introduce fixes for two trees.

TBH, I would just wait, until it shows up in the official Gentoo tree, which hopefully won't take that long.
Back to top
View user's profile Send private message
StifflerStealth
l33t
l33t


Joined: 03 Jul 2002
Posts: 968

PostPosted: Mon Jul 14, 2008 3:36 pm    Post subject: Reply with quote

Dagger wrote:
As I understand there is no way to switch from KDE trunk to 4.1 branch without modifying kde4svn.eclass files.

Berniyh would it be possible to modify eclass to accept extra value which would override default trunk? It could be provided in sets file or ENV.
I was thinking of writing my own eclass that supported the branch kde instead of trunk and sharing it with people, but it is a lot of work, as Berniyh said, to update patches and all that. I honestly don't know how the devs manage to find time to update the Gentoo tree and support this overlay at the same time.

Also, there are a few trunk patches that I want to try out in the KDE 4.1 branch that remove the double lookup that causes routers to fail, so I can actually use Konq as my web browser again.

Cheers.
_________________
Nothing to read in this sig. Move along.
Back to top
View user's profile Send private message
StifflerStealth
l33t
l33t


Joined: 03 Jul 2002
Posts: 968

PostPosted: Mon Jul 14, 2008 11:28 pm    Post subject: Reply with quote

Serious question for the devs:

Would it be possible to modify the eclass a bit so that if a person doesn't have a local copy of the svn, a weekly or so snapshot is downloaded that can be updatable by svn up or whatever the svn eclass uses? This would save a lot bandwidth on the KDE anon svn sync. I am pretty sure we draw a lot of bandwidth DLing copies of the svn all the time. The update of the snapshot would take less time and it would be faster in general than a complete svn checkout. I noticed a compressed tar.bz2 file downloads and unzips faster than a svn checkout.

This also comes at a time when it seems like some users are having checkout issues. This might aide them in actually obtaining a copy. :) It could just a tarball with the same name each week that the eclass points to. Just overwrite it with the updated tarball and new people would grab that. Existing users don't need the updated tarball.

Thanks.
_________________
Nothing to read in this sig. Move along.
Back to top
View user's profile Send private message
travlr
Apprentice
Apprentice


Joined: 20 Apr 2005
Posts: 158
Location: USA

PostPosted: Tue Jul 15, 2008 7:11 am    Post subject: genkdesvn should be built against qt-copy Reply with quote

A question for the ebuild devs:

Why doesn't the KDE4 overlay depend on KDE/trunk/qt-copy?

Patches are constantly added to qt-copy that should be made available to any KDE/trunk build... like through genkdesvn.

thanks,
-travlr
Back to top
View user's profile Send private message
enzobelmont
Guru
Guru


Joined: 06 Apr 2004
Posts: 345
Location: Chiapas, Mexico

PostPosted: Tue Jul 15, 2008 12:52 pm    Post subject: Reply with quote

can i cheat paludis to compile my svn version offline??

i need to get latest SVN in home but compile it in my office, but in my office network is down.

can i change my system clock??

what can i do???

any advice??

tanks in advance.
_________________
Mens sana in corpore sano... Gentoo laetificat cor hominis
Back to top
View user's profile Send private message
Berniyh
l33t
l33t


Joined: 07 Jun 2006
Posts: 677

PostPosted: Tue Jul 15, 2008 2:58 pm    Post subject: Reply with quote

enzobelmont wrote:
can i cheat paludis to compile my svn version offline??

i need to get latest SVN in home but compile it in my office, but in my office network is down.

can i change my system clock??

what can i do???

any advice??

tanks in advance.

Install eclass-manpages and read the subversion.eclass manpage.
Back to top
View user's profile Send private message
Ampheus
l33t
l33t


Joined: 19 Oct 2005
Posts: 814
Location: Rheine, NRW, Germany

PostPosted: Tue Jul 15, 2008 9:58 pm    Post subject: Reply with quote

StifflerStealth wrote:
Dagger wrote:
As I understand there is no way to switch from KDE trunk to 4.1 branch without modifying kde4svn.eclass files.

Berniyh would it be possible to modify eclass to accept extra value which would override default trunk? It could be provided in sets file or ENV.
I was thinking of writing my own eclass that supported the branch kde instead of trunk and sharing it with people, but it is a lot of work, as Berniyh said, to update patches and all that. I honestly don't know how the devs manage to find time to update the Gentoo tree and support this overlay at the same time.

Also, there are a few trunk patches that I want to try out in the KDE 4.1 branch that remove the double lookup that causes routers to fail, so I can actually use Konq as my web browser again.

Cheers.


I also had this problem here with my router, but you can workaround this by installing and using pdnsd.
Simply install it, check the config file in /etc/pdnsd/pdnsd.conf and then change your /etc/resolv.conf that it only contains this:
Code:
nameserver 127.0.0.1


This worked around that bug here and also made Konqueror faster. Another good thing with pdnsd is that you can add ad-block tables to it to block ads.

Using pdnsd this way means that every application on your system will use it by default without changing any proxy settings and you can have a general ad[or somewhat]-blocker on your system.
Back to top
View user's profile Send private message
enzobelmont
Guru
Guru


Joined: 06 Apr 2004
Posts: 345
Location: Chiapas, Mexico

PostPosted: Wed Jul 16, 2008 5:22 am    Post subject: Reply with quote

thanks Berniyh you're always helping us.
_________________
Mens sana in corpore sano... Gentoo laetificat cor hominis
Back to top
View user's profile Send private message
StifflerStealth
l33t
l33t


Joined: 03 Jul 2002
Posts: 968

PostPosted: Wed Jul 16, 2008 4:35 pm    Post subject: Reply with quote

Ampheus wrote:
StifflerStealth wrote:
Dagger wrote:
As I understand there is no way to switch from KDE trunk to 4.1 branch without modifying kde4svn.eclass files.

Berniyh would it be possible to modify eclass to accept extra value which would override default trunk? It could be provided in sets file or ENV.
I was thinking of writing my own eclass that supported the branch kde instead of trunk and sharing it with people, but it is a lot of work, as Berniyh said, to update patches and all that. I honestly don't know how the devs manage to find time to update the Gentoo tree and support this overlay at the same time.

Also, there are a few trunk patches that I want to try out in the KDE 4.1 branch that remove the double lookup that causes routers to fail, so I can actually use Konq as my web browser again.

Cheers.


I also had this problem here with my router, but you can workaround this by installing and using pdnsd.
Simply install it, check the config file in /etc/pdnsd/pdnsd.conf and then change your /etc/resolv.conf that it only contains this:
Code:
nameserver 127.0.0.1


This worked around that bug here and also made Konqueror faster. Another good thing with pdnsd is that you can add ad-block tables to it to block ads.

Using pdnsd this way means that every application on your system will use it by default without changing any proxy settings and you can have a general ad[or somewhat]-blocker on your system.
Thanks for that tip. There is a patch for 4.2 that is suppose to fix this. I need to talk to the devs and see if the backport it. If they don't backport it, I will. :) It's just rediculus that this bug has been there for me since the early 4.0 betas. I have reported it, backtraced, logged and done all I could so they could track it down. I was really disappointed when Kon 4.1 RC1 could not connect to the webpages.

And, you can add ad-blocking to Konq. See my guide here:
https://forums.gentoo.org/viewtopic-t-599933.html
I show you how to use one of the most powerful ad-blockers there is. ;) It's quite cool.

Though, if I can't backport that patch, I will try your idea out. Another workaround I found was just installing FireFox 3 bin. :P

Cheers.
_________________
Nothing to read in this sig. Move along.
Back to top
View user's profile Send private message
KD-120RD
Tux's lil' helper
Tux's lil' helper


Joined: 07 Mar 2004
Posts: 149
Location: Hamburg

PostPosted: Wed Jul 16, 2008 9:19 pm    Post subject: Reply with quote

hi

i hope this is the right place.
i cant emerge plasma-workspace for the last few days.
its on a stable x86 system with kdesvn-portage overlay via layman.

Code:
[72%] Building CXX object plasma/plasma/CMakeFiles/kdeinit_plasma-qgv.dir/positioningruler.o
[ 73%] Building CXX object plasma/plasma/CMakeFiles/kdeinit_plasma-qgv.dir/toolbutton.o
[ 73%] Building CXX object plasma/plasma/CMakeFiles/kdeinit_plasma-qgv.dir/appadaptor.o
[ 73%] Building CXX object plasma/plasma/CMakeFiles/kdeinit_plasma-qgv.dir/ksmserver_interface.o
[ 74%] Building CXX object plasma/plasma/CMakeFiles/kdeinit_plasma-qgv.dir/kdeinit_plasma-qgv_automoc.o
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp:138: warning: unused parameter ‘event’
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp:144: warning: unused parameter ‘event’
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp:316: warning: unused parameter ‘parent’
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp: In member function ‘void PanelController::setContainment(Plasma::Containment*)’:
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp:437: warning: passing ‘qreal’ for argument 1 to ‘void PositioningRuler::setMinLength(int)’
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp:444: warning: passing ‘qreal’ for argument 1 to ‘void PositioningRuler::setMinLength(int)’
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp: In member function ‘virtual void PanelController::mouseMoveEvent(QMouseEvent*)’:
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp:686: warning: passing ‘float’ for argument 1 to ‘QPoint::QPoint(int, int)’
/var/tmp/portage/kde-base/plasma-workspace-9999/work/plasma-workspace/plasma/plasma/panelcontroller.cpp:686: warning: passing ‘float’ for argument 2 to ‘QPoint::QPoint(int, int)’
Linking CXX shared library ../../lib/libkdeinit4_plasma.so
[ 74%] Built target kdeinit_plasma-qgv
make: *** [all] Error 2
 *
 * ERROR: kde-base/plasma-workspace-9999 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 2980:  Called kde4overlay-meta_src_compile
 *             environment, line 2257:  Called kde4overlay-meta_src_make
 *             environment, line 2306:  Called kde4overlay-base_src_make
 *             environment, line 2020:  Called cmake-utils_src_make
 *             environment, line  709:  Called die
 * The specific snippet of code:
 *           emake "$@" || die "Make failed!";
 *  The die message:
 *   Make failed!
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/kde-base/plasma-workspace-9999/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/kde-base/plasma-workspace-9999/temp/environment'.
 * This ebuild used the following eclasses from overlays:
 *   /usr/portage/local/layman/kdesvn-portage/eclass/kde4svn-meta.eclass
 *   /usr/portage/local/layman/kdesvn-portage/eclass/kde4svn.eclass
 *   /usr/portage/local/layman/kdesvn-portage/eclass/kde4overlay-meta.eclass
 *   /usr/portage/local/layman/kdesvn-portage/eclass/kde4overlay-functions.eclass
 *   /usr/portage/local/layman/kdesvn-portage/eclass/kde4overlay-base.eclass

_________________
(\ _/)
(O.o)
(>< ) This is Bunny. Copy Bunny into your signature to help him on his way to world domination.
Back to top
View user's profile Send private message
Berniyh
l33t
l33t


Joined: 07 Jun 2006
Posts: 677

PostPosted: Wed Jul 16, 2008 10:59 pm    Post subject: Reply with quote

KD-120RD wrote:
hi

i hope this is the right place.
i cant emerge plasma-workspace for the last few days.
its on a stable x86 system with kdesvn-portage overlay via layman.

Not our stuff, sorry.
Back to top
View user's profile Send private message
g2g591
Apprentice
Apprentice


Joined: 17 Sep 2007
Posts: 171

PostPosted: Thu Jul 17, 2008 11:12 pm    Post subject: Reply with quote

this topic is for the kde overlay, not kdesvn-portage, sorry.
Back to top
View user's profile Send private message
lazx888
Tux's lil' helper
Tux's lil' helper


Joined: 13 Sep 2005
Posts: 118

PostPosted: Fri Jul 18, 2008 12:59 am    Post subject: Reply with quote

Anyone else have problems with the "Add Widgets" plasma screen having a white font?

Thanks :)
Back to top
View user's profile Send private message
nicosaturno
n00b
n00b


Joined: 05 Apr 2005
Posts: 57

PostPosted: Fri Jul 18, 2008 6:37 pm    Post subject: Reply with quote

on my kde4-scm (compiled today) i've got this problem with dolphin...nepomuk doesn't work :cry:

Code:

dolphin(31625) KLocalePrivate::initEncoding: Cannot resolve system encoding, defaulting to ISO 8859-1.
"/usr/kde/svn/bin/dolphin(31625)" Error in thread 2784319232 : "org.freedesktop.DBus.Error.UnknownObject - No such object path '/org/soprano/Server'"
"/usr/kde/svn/bin/dolphin(31625)" Error in thread 2784319232 : "QLocalSocket::connectToServer: Invalid name"                                         
"/usr/kde/svn/bin/dolphin(31625)" Error in thread 2784319232 : "org.freedesktop.DBus.Error.UnknownObject - No such object path '/org/soprano/Server'"
dolphin(31625): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "No such object path '/modules/ktimezoned'"                           


i simply start my kde4 with "exec /usr/kde/svn/bin/startkde" in my .xinitrc...is it right?

I think it's a problem related with dbus...how can i solve it?

thanks!
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page Previous  1, 2, 3 ... 20, 21, 22 ... 26, 27, 28  Next
Page 21 of 28

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum