Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ncmpcpp - improved ncmpc with some new features
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 6, 7, 8, 9, 10, 11  Next  
Reply to topic    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Mon Aug 31, 2009 8:54 pm    Post subject: Reply with quote

Quote:
most likely you have wrong mixer settings in mpd.conf.


Do you mean as per http://mpd.wikia.com/wiki/Configuration#audio_outputs?

I don't have an asoundrc but do have an /etc/asound.state. Which has a different format that the example given in the wiki. The only line that seems to apply:

Code:
name 'Lineout Playback Volume'


I inserted it in my mpd.conf as both 'mixer_device' and as 'mixer_control' but it didn't help.
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Mon Aug 31, 2009 9:25 pm    Post subject: Reply with quote

ekko wrote:
I keep my tunes on a USB key which I use in a netbook. Don't I have to re-create the database whenever I transfer new files to it from a desktop and then back to the netbook?

No, you should tell mpd to update your db from a client (in ncmpcpp it's 'u').

To get mixer to work, you need to change mixer_control in your audio output configuration to name of control that you use to change volume in alsamixer.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Mon Aug 31, 2009 10:24 pm    Post subject: Reply with quote

Quote:
To get mixer to work, you need to change mixer_control in your audio output configuration to name of control that you use to change volume in alsamixer.


Well, other than what I tried above, I'm at a loss. Been all through /proc/asound. nothing there. Looked at /etc/init.d/alsasound and /etc/conf.d/alsasound, nothing. No 'hidden' files in the home dir.

I notice now(don't know what I failed to return to the original state) that instead of a volume readout in the client there's just this persistant -1% and a line at the bottom when I use the arrows or the -/+ that says 'ACK 52@0 problem setting volume'

When I googled I came across that very same error tagged 'SOLVED' but the Archlinux site it leads to is down :cry:

It's not in man page. If it's in the actual executable /usr/bin/alsamixer I sure don't know where to look. I grep'ed for MIXER_CONTROL, mixer_control, VOLUME, volume, SET_VOLUME and set_volume and came up empty.
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Mon Aug 31, 2009 11:23 pm    Post subject: Reply with quote

pastebin your mpd.conf and show me a screenshot from alsamixer if possible.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Tue Sep 01, 2009 1:40 am    Post subject: Reply with quote

unK wrote:
pastebin your mpd.conf and show me a screenshot from alsamixer if possible.


Code:
# A default Gentoo configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.


# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory         "/var/lib/mpd/music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory      "/var/lib/mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file            "/var/lib/mpd/database"
#
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file         "/var/log/mpd/mpd.log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file         "/var/run/mpd/mpd.pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#
state_file         "/var/lib/mpd/state"
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
user            "soupeee"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
#
# For network
#bind_to_address         "localhost"
#
# And for Unix Socket   
#bind_to_address         "/var/lib/mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port            "6600"
#
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level         "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback         "yes"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists   "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#
#metadata_to_use   "artist,album,title,track,name,genre,date,composer,performer,disc"
#
###############################################################################


# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
follow_outside_symlinks   "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
follow_inside_symlinks      "yes"
#
###############################################################################


# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled      "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name         "Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Input #######################################################################
#

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

#
###############################################################################

# Audio Output ################################################################
#
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
#
# An example of an ALSA output:
#
audio_output {
   type      "alsa"
   name      "My ALSA Device"
   device      "hw:0,0"   # optional
   format      "44100:16:2"   # optional
   mixer_device   "default"   # optional
   mixer_control   "PCM"      # optional
   mixer_index   "0"      # optional
}
#
# An example of an OSS output:
#
#audio_output {
#   type      "oss"
#   name      "My OSS Device"
#   device      "/dev/dsp"   # optional
#   format      "44100:16:2"   # optional
#   mixer_device   "/dev/mixer"   # optional
#   mixer_control   "PCM"      # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#   type      "shout"
#   encoding   "ogg"         # optional
#   name      "My Shout Stream"
#   host      "localhost"
#   port      "8000"
#   mount      "/mpd.ogg"
#   password   "hackme"
#   quality      "5.0"
#   bitrate      "128"
#   format      "44100:16:1"
#   protocol   "icecast2"      # optional
#   user      "source"      # optional
#   description   "My Stream Description"   # optional
#   genre      "jazz"         # optional
#   public      "no"         # optional
#   timeout      "2"         # optional
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
#   type      "httpd"
#   name      "My HTTP Stream"
#   encoder      "vorbis"      # optional, vorbis or lame
#   port      "8000"
#   quality      "5.0"         # do not define if bitrate is defined
#   bitrate      "128"         # do not define if quality is defined
#   format      "44100:16:1"
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
#   type      "pulse"
#   name      "My Pulse Output"
#   server      "remote_server"      # optional
#   sink      "remote_server_sink"   # optional
#}
#
## Example "pipe" output:
#
#audio_output {
#   type      "pipe"
#   name      "my pipe"
#   command      "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
#   command      "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
#   command      "nc example.org 8765"
#   format      "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#   type      "null"
#   name      "My Null Output"
#}
#
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#
#audio_output_format      "44100:16:2"
#
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use.  Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#
#samplerate_converter      "Fastest Sinc Interpolator"
#
###############################################################################


# Volume control mixer ########################################################
#
# These are the global volume control settings. By default, this setting will
# be detected to the available audio output device, with preference going to
# hardware mixing. Hardware and software mixers for individual audio_output
# sections cannot yet be mixed.
#
# An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
# setting is used other sound applications will be affected by the volume
# being controlled by MPD.
#
#mixer_type         "hardware"
#
# An example for controlling all mixers through software. This will control
# all controls, even if the mixer is not supported by the device and will not
# affect any other sound producing applications.
#
#mixer_type         "software"
#
# This example will not allow MPD to touch the mixer at all and will disable
# all volume controls.
#
#mixer_type         "disabled"
#
###############################################################################


# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "album" or "track". See <http://www.replaygain.org> for more
# details. This setting is disabled by default.
#
#replaygain         "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp      "0"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#
#volume_normalization      "no"
#
###############################################################################


# MPD Internal Buffering ######################################################
#
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#
#audio_buffer_size      "2048"
#
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#
#buffer_before_play      "10%"
#
###############################################################################


# Resource Limitations ########################################################
#
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#
#connection_timeout      "60"
#max_connections      "10"
#max_playlist_length      "16384"
#max_command_list_size      "2048"
#max_output_buffer_size      "8192"
#
###############################################################################


# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting. After modification of this setting mpd
# --create-db must be run to change the database.
#
filesystem_charset "UTF-8"
#
# This setting controls the encoding that ID3v1 tags should be converted from.
#
#id3v1_encoding         "ISO-8859-1"
#
###############################################################################
[quote][/quote]


No screenshot. Running bare bones xfce4 wm. The PrtScr button on the Asus 900A netbook is the bottom half of the Ins button. It's highlighted in blue which is part of the Fn key system which is still going to need some tweaking yet.


But I can describe it.

Across the top: AlsaMixer v1.0.20(Press esc to quit)

Upper left:

Card: HDA Intel
Chip: Realtek ALC269
View [Playback]

Across the middle four columns

PCM(no mute/unmute) LineOut(presently unmuted) Mic Boos(not configured) iSpeaker(muted)
Back to top
View user's profile Send private message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Tue Sep 01, 2009 1:52 am    Post subject: Reply with quote

Quote:
put this into your ~/.bashrc:
Code:
alias ncmpcpp="ncmpcpp; ncmpcpp stop"


No effect.
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Tue Sep 01, 2009 2:15 am    Post subject: Reply with quote

I told you to pastebin it, not paste. See http://pastebin.com/ for the future.

Anyway, try to comment out mixer_index.

ekko wrote:
Quote:
put this into your ~/.bashrc:
Code:
alias ncmpcpp="ncmpcpp; ncmpcpp stop"


No effect.

If you are running ncmpcpp from terminal, it has to work (it does here). If you are running it from your wm/de menu, you need to change the command you use in your menu.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Tue Sep 01, 2009 4:31 pm    Post subject: Reply with quote

unK wrote:
I told you to pastebin it, not paste. See http://pastebin.com/ for the future.


:oops: My eyes must have glazed over when they got to the -bin part. Cool site, another why-didn't-I-think-of-that moment.
Back to top
View user's profile Send private message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Tue Sep 01, 2009 5:06 pm    Post subject: Reply with quote

unK wrote:

If you are running ncmpcpp from terminal, it has to work (it does here). If you are running it from your wm/de menu, you need to change the command you use in your menu.


Terminal. It works! Didn't log out and back in after I did the edit. Thanks.

Almost forgot, commenting out 'mixer_index' didn't work. But the persistant -1% is gone and the percentages increase/decrease as normal. Volume stays the same, however.
Back to top
View user's profile Send private message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Wed Sep 02, 2009 7:34 pm    Post subject: Reply with quote

Now that I'm mobile and connected to the wifi at the coffee shop and I try to start ncmpcpp I'm getting the ol' "Cannot connect to mpd: problems connecting to "127.0.0.1" on port 6600: Connection refused" error. Earlier when this problem arose I commented the "bind-to" lines in the config out. But that doesn't seem to help now that I'm connected to the wireless. My previous messages were sent from a home pc with the netbook beside me unconnected to the web at all, and ncmpcpp started up as usual.

Thankfully I've got mpg123 to service my musical needs :) , save for my wavs, wmas, oggs :cry:
Back to top
View user's profile Send private message
ekko
n00b
n00b


Joined: 04 May 2005
Posts: 19

PostPosted: Wed Sep 02, 2009 10:32 pm    Post subject: Reply with quote

ekko wrote:
Now that I'm mobile and connected to the wifi at the coffee shop and I try to start ncmpcpp I'm getting the ol' "Cannot connect to mpd: problems connecting to "127.0.0.1" on port 6600: Connection refused" error.


Turns out it's not the wifi, the mpd daemon starts on the default level then just as quickly turns itself off again :(
Back to top
View user's profile Send private message
darklegion
Guru
Guru


Joined: 14 Nov 2004
Posts: 468

PostPosted: Thu Sep 03, 2009 2:07 am    Post subject: Reply with quote

Quote:
Thankfully I've got mpg123 to service my musical needs , save for my wavs, wmas, oggs


You should keep mplayer around for these situations.Mplayer plays everything :)
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Wed Sep 09, 2009 10:53 pm    Post subject: Reply with quote

ncmpcpp-0.4 released.

changes:
  • new screen: music visualizer with sound wave/frequency spectrum modes
  • new feature: alternative user interface
  • new feature: command line switch for displaying now playing song
  • new feature: support for fixed size and/or right aligned columns
  • new feature: display bitrate of current song in statusbar (optional)
  • new feature: display remaining time of current song instead of elapsed (optional)
  • new feature: jump to now playing song at start (enabled by default)
  • new feature: additional attributes for columns
  • song format: support for nested braces
  • support for colors in song_status_format
  • customizable progressbar look
  • mouse support for additional windows
  • optional user prompting before clearing main playlist
  • track and year tag are not limited to numbers anymore if mp3 files are edited
  • marker for full filename (F) has been replaced with directory (D)
  • a lot of other minor improvements and bugfixes

enjoy.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
xiber
Apprentice
Apprentice


Joined: 28 Oct 2003
Posts: 245
Location: Fremont, CA

PostPosted: Thu Sep 10, 2009 3:03 am    Post subject: Reply with quote

Using lyricswiki and toggleing lyrics craches urxvt terminal ncmpcpp is running in. Using ncmpcpp 3.5. Thought lyricswiki had some api change recently.
_________________
Athlon XP-M 2600 @ 2.3 GHz OC | Abit NF7-S r2.0 | 2x512MB PC3200 | 6600GT OC | Audigy 2 | Gentoo | 2005

Athlon 64 X2 4600 @ 2.4 GHz | Asus M2N-SLI DLX | 4x1GB PC6400 | 7600GT KO | 7HD @ 3.1TB | OpenSolaris SXCE | 2007
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Thu Sep 10, 2009 8:49 am    Post subject: Reply with quote

fetching lyrics from lyricwiki doesn't work anymore and has been removed in 0.4. if you continue to use 0.3.5, use lyricsplugin instead.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
evert_
n00b
n00b


Joined: 31 Aug 2006
Posts: 37

PostPosted: Thu Sep 10, 2009 10:53 am    Post subject: Reply with quote

Thanks for this new release, it's looking really promising :D.
Back to top
View user's profile Send private message
xiber
Apprentice
Apprentice


Joined: 28 Oct 2003
Posts: 245
Location: Fremont, CA

PostPosted: Fri Sep 11, 2009 3:24 am    Post subject: Reply with quote

upps, didn't see v0.4. Just updated. Question:

With "ncmpcpp --now-playing" is it possible to produce multiple line output by only executing once?
_________________
Athlon XP-M 2600 @ 2.3 GHz OC | Abit NF7-S r2.0 | 2x512MB PC3200 | 6600GT OC | Audigy 2 | Gentoo | 2005

Athlon 64 X2 4600 @ 2.4 GHz | Asus M2N-SLI DLX | 4x1GB PC6400 | 7600GT KO | 7HD @ 3.1TB | OpenSolaris SXCE | 2007
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Fri Sep 11, 2009 10:20 am    Post subject: Reply with quote

No. But if you fill a feature request bug @ mpd mantis, it can be.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
one_and_only
Apprentice
Apprentice


Joined: 13 May 2007
Posts: 250
Location: PL/Krakow

PostPosted: Thu Sep 24, 2009 11:00 am    Post subject: Reply with quote

How about editing apev2 tags? It's something that ncmpcpp handles, not mpd? It looks like taglib supports ape files. Currently I got error "Cannot read file filename.ape!" when I try to do it.
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Fri Sep 25, 2009 7:21 am    Post subject: Reply with quote

If ncmpcpp cannot read ape files then they are not supported by taglib. I see that taglib has implemented some ape-specific items, but it doesn't have a handler for ape files (unless I'm missing something, see http://developer.kde.org/~wheeler/taglib/api/annotated.html).
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Sat Oct 03, 2009 5:38 pm    Post subject: Reply with quote

ncmpcpp-0.4.1 released.

changes:
  • support for writing performer, composer and disc tags into ogg and flac files
  • support for custom prefix/suffix of now playing song
  • support for system charset encoding autodetection
  • support for underlined text
  • optimizations and bugfixes

enjoy.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
Dimanish
n00b
n00b


Joined: 04 May 2007
Posts: 7

PostPosted: Tue Oct 06, 2009 6:00 pm    Post subject: Reply with quote

Hi unK!
First of all, thanks again for great mpd client.
I have one question regarding visualizer functionallity. Try to setup it with adding to /etc/mpd.conf:
Code:
audio_output {
       type            "fifo"
       name            "My FIFO"
       path            "/tmp/mpd.fifo"
       format          "44100:16:1"
}

Restart mpd, open ncmpcpp, press 9 for select "Music visualizer" after that and get:
Code:
Couldn't open "" for reading PCM data: No such file or directory

Visualizer doesn't working.
Code:
~ ls -l /tmp/mpd.fifo
prw-r--r-- 1 root root 0 Окт  6 21:56 /tmp/mpd.fifo|

mpd.fifo must be empty?

Version info:
Code:
~ % ncmpcpp -v   
ncmpcpp version: 0.4.2_pre

optional screens compiled-in:
 - tag editor
 - tiny tag editor
 - artist info
 - outputs
 - visualizer
 - clock

encoding detection: enabled
built with support for: curl iconv ncurses taglib threads unicode


Code:
~ mpd --version | grep fifo           
shout null fifo pipe alsa ao httpd
Back to top
View user's profile Send private message
unK
l33t
l33t


Joined: 06 Feb 2007
Posts: 769

PostPosted: Tue Oct 06, 2009 7:54 pm    Post subject: Reply with quote

hello,

it seems you didn't specify visualizer_fifo_path in ncmpcpp config.
_________________
ncmpcpp - featureful ncurses based MPD client inspired by ncmpc
Back to top
View user's profile Send private message
Dimanish
n00b
n00b


Joined: 04 May 2007
Posts: 7

PostPosted: Tue Oct 06, 2009 8:06 pm    Post subject: Reply with quote

unK wrote:
hello,

it seems you didn't specify visualizer_fifo_path in ncmpcpp config.

yes, thanks.
Back to top
View user's profile Send private message
xiber
Apprentice
Apprentice


Joined: 28 Oct 2003
Posts: 245
Location: Fremont, CA

PostPosted: Sat Oct 10, 2009 4:12 am    Post subject: Reply with quote

Thanks for "support for custom prefix/suffix of now playing song" in 4.1. This solves an issue that was giving me problems since I switched to ncmpcpp. But I have one question, (and parden my ignorance), I couldn't figure out what effect "browser_playlist_prefix" has.
_________________
Athlon XP-M 2600 @ 2.3 GHz OC | Abit NF7-S r2.0 | 2x512MB PC3200 | 6600GT OC | Audigy 2 | Gentoo | 2005

Athlon 64 X2 4600 @ 2.4 GHz | Asus M2N-SLI DLX | 4x1GB PC6400 | 7600GT KO | 7HD @ 3.1TB | OpenSolaris SXCE | 2007
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page Previous  1, 2, 3 ... 6, 7, 8, 9, 10, 11  Next
Page 7 of 11

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum