Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[installation] difficultés à configurer ma connexion
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Thu Sep 18, 2008 1:36 am    Post subject: [installation] difficultés à configurer ma connexion Reply with quote

Salut,
A chaque fois que j'essaie de lancer emerge, je reçois le même truc...
Voila un exemple:
Code:
localhost ~ # emerge net-dialup/ppp net-dialup/speedtouch-usb

Calculating dependencies... done!


>>> Verifying ebuild Manifests...



>>> Emerging (1 of 4) sys-kernel/gentoo-sources-2.6.24-r7 to /


>>> Downloading 'http://distfiles.gentoo.org/distfiles/linux-2.6.24.tar.bz2'
--22:27:20--
  http://distfiles.gentoo.org/distfiles/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving distfiles.gentoo.org...
 failed: Temporary failure in name resolution.


>>> Downloading 'http://distro.ibiblio.org/pub/linux/distributions/gentoo/distfiles/linux-2.6.24.tar.bz2'
--22:27:20--
  http://distro.ibiblio.org/pub/linux/distributions/gentoo/distfiles/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving distro.ibiblio.org...
 failed: Temporary failure in name resolution.


>>> Downloading 'http://www.de.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2'
--22:27:20--
  http://www.de.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving www.de.kernel.org...
 failed: Temporary failure in name resolution.


>>> Downloading 'http://www.fr.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2'
--22:27:20--
  http://www.fr.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving www.fr.kernel.org...
 failed: Temporary failure in name resolution.


>>> Downloading 'http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2'
--22:27:20--
  http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving www.kernel.org...
 failed: Temporary failure in name resolution.


>>> Downloading 'http://www.us.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2'
--22:27:20--
  http://www.us.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving www.us.kernel.org...
 failed: Temporary failure in name resolution.


>>> Downloading 'http://www.at.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2'
--22:27:20--
  http://www.at.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving www.at.kernel.org...
 failed: Temporary failure in name resolution.


>>> Downloading 'http://www.uk.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2'
--22:27:20--
  http://www.uk.kernel.org/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2

           => `/usr/portage/distfiles/linux-2.6.24.tar.bz2'
Resolving www.uk.kernel.org...
 failed: Temporary failure in name resolution.
!!!

Couldn't download 'linux-2.6.24.tar.bz2'. Aborting.
 
* Fetch failed for 'sys-kernel/gentoo-sources-2.6.24-r7'
!!!
can't process invalid log file: merge.ERROR

Merci d'avance

PS: Je suis pas encore connecté a internet, c'est pourquoi j'essai d'installer le "ppp" et "speedtouch-usb"


Last edited by YassBoss on Thu Sep 18, 2008 11:54 pm; edited 2 times in total
Back to top
View user's profile Send private message
Slashounet
Tux's lil' helper
Tux's lil' helper


Joined: 13 Jan 2006
Posts: 87
Location: /home/ounet

PostPosted: Thu Sep 18, 2008 5:23 am    Post subject: Reply with quote

Salut,

Eh bien si tu n'es pas encore connecté à Internet, c'est normal que tu n'arrives pas à faire d'emerge. Il faut que tu télécharges ces paquets et que tu les copies dans /usr/portages/distfiles. Ensuite tu pourras lancer ton emerge. Penses à tout télécharger (pas seulement les 3 paquets, il faut aussi les dépendances) avant de te lancer.
Ensuite, une fos ton accès Internet configuré, tu pourras lancer tes emerge normalement.

Sinon, il faudrait que tu mettes ton titre en conformité.

/ounet
_________________
pif paf pouf !
\\o \o/ o//
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 7939
Location: ~Brussels - Belgique

PostPosted: Thu Sep 18, 2008 7:03 am    Post subject: Reply with quote

vérifie /etc/resolv.conf
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
titix
Guru
Guru


Joined: 01 Nov 2003
Posts: 343
Location: Paris, France

PostPosted: Thu Sep 18, 2008 7:46 am    Post subject: Reply with quote

XavierMiller wrote:
vérifie /etc/resolv.conf

Le monsieur il a bien dit qu'il n'avait pas internet. Vérifier son /etc/resolv.conf ne changera rien ;)
_________________
titix
« La route est longue... mais la voie est libre ! »
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Thu Sep 18, 2008 8:19 am    Post subject: Reply with quote

Normalement sur le cd d'install minimal il a ce qu'il faut pour configurer une connection internet avec modem.(c'était mon cas lors de mon install)
pppoe-setup ou pppoeconf je sais plus... après est ce que ton modem speedtouch en usb sera reconnu c'est une autre histoire...fais quelques recherches avant
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 7939
Location: ~Brussels - Belgique

PostPosted: Thu Sep 18, 2008 8:20 am    Post subject: Reply with quote

ah ok.

Dans ce cas, lance emerge --fetch et analyse le résultat de /var/log/emerge-fetch.log pour obtenir les fichiers à récupérer.
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
geekounet
Bodhisattva
Bodhisattva


Joined: 11 Oct 2004
Posts: 3772
Location: Wellington, Aotearoa

PostPosted: Thu Sep 18, 2008 11:57 am    Post subject: Reply with quote

Salut et bienvenue ! Peux-tu mettre ton titre du topic en conformité avec les conventions de notre forum, et le rendre plus explicite s'il te plait ? Merci :)
Back to top
View user's profile Send private message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Thu Sep 18, 2008 1:59 pm    Post subject: Reply with quote

Salut,
Faut-il pas attendre que j'essaie les solutions avant mettre le titre en conformité?
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Thu Sep 18, 2008 2:04 pm    Post subject: Reply with quote

Non il aurait fallu le mettre en conformité avant de demander des solutions...lol :lol:
Il te suffit d'éditer ton premier message et de modifier son titre pour mettre un truc du genre [installation] difficultés à configurer ma connexion
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
geekounet
Bodhisattva
Bodhisattva


Joined: 11 Oct 2004
Posts: 3772
Location: Wellington, Aotearoa

PostPosted: Thu Sep 18, 2008 3:37 pm    Post subject: Reply with quote

YassBoss wrote:
Salut,
Faut-il pas attendre que j'essaie les solutions avant mettre le titre en conformité?

Comment tu veux qu'on vienne t'aider si on ne sait pas de quoi tu parles en lisant le titre ? Et comment ceux qui ont actuellement le même pb que toi peuvent trouver ton topic par une recherche ?
Et ton titre n'est toujours pas explicite...
Back to top
View user's profile Send private message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Thu Sep 18, 2008 11:57 pm    Post subject: Reply with quote

Salut,
J'ai réussi a lancer emerge, mais j'arrive pas a installer linux-atm, je reçois des messages d'erreurs dont cette phrase:
ERROR: net-dialup/linux-atm-2.4.1-r2 failed
Merci
Back to top
View user's profile Send private message
SlashRhumSlashNeisson
Apprentice
Apprentice


Joined: 30 Dec 2006
Posts: 200
Location: Lille

PostPosted: Fri Sep 19, 2008 3:45 am    Post subject: Reply with quote

salut,

YassBoss wrote:
ERROR: net-dialup/linux-atm-2.4.1-r2 failed


ça c'est la conséquence.

La cause est avant tes lignes d'erreurs :wink:

Post les quelques lignes avant l'erreur :idea:
_________________
Gentoo only
Back to top
View user's profile Send private message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Fri Sep 19, 2008 4:17 pm    Post subject: Reply with quote

Voila le code complet
Code:
localhost ~ # emerge linux-atm
Calculating dependencies... done!
>>> Verifying ebuild Manifests...

>>> Emerging (1 of 1) net-dialup/linux-atm-2.4.1-r2 to /
 * linux-atm-2.4.1.tar.gz RMD160 SHA1 SHA256 size ;-) ...                 [ ok ]
 * checking ebuild checksums ;-) ...                                      [ ok ]
 * checking auxfile checksums ;-) ...                                     [ ok ]
 * checking miscfile checksums ;-) ...                                    [ ok ]
 * checking linux-atm-2.4.1.tar.gz ;-) ...                                [ ok ]
>>> Unpacking source...
>>> Unpacking linux-atm-2.4.1.tar.gz to /var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work
 * Applying linux-atm-2.4.1-gcc4.patch ...                                [ ok ]
 * Applying linux-atm-2.4.1-declarations.patch ...                        [ ok ]
 * Running elibtoolize in: linux-atm-2.4.1
 *   Applying install-sh-1.5.patch ...
 *   Applying ltmain-1.5.patch ...
 *   Applying portage-1.5.10.patch ...
 *   Applying relink-1.4.1.patch ...
 *   Applying sed-1.5.6.patch ...
 *   Applying uclibc-conf-1.2.0.patch ...
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1 ...
 * econf: updating linux-atm-2.4.1/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating linux-atm-2.4.1/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --build=x86_64-pc-linux-gnu
creating cache ./config.cache
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking build system type... x86_64-pc-linux-gnu
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... found
checking for working automake... missing
checking for working autoheader... found
checking for working makeinfo... found
checking for gcc... gcc
checking whether the C compiler (gcc -O2 -pipe -fno-strict-aliasing ) works... yes
checking whether the C compiler (gcc -O2 -pipe -fno-strict-aliasing ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking for flex... flex
checking for flex... (cached) flex
checking for yywrap in -lfl... no
checking lex output file root... lex.yy
checking whether yytext is a pointer... no
checking for bison... bison -y
checking for a BSD compatible install... /usr/bin/install -c
checking for Cygwin environment... no
checking for mingw32 environment... no
checking for ld used by GCC... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )
checking for object suffix... o
checking for executable suffix... no
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... yes
checking for file... /usr/bin/file
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/x86_64-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
creating libtool
checking for perl... /usr/bin/perl
checking for asm/errno.h... yes
checking for linux/atmsap.h... yes
checking for main in -lresolv... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
creating doc/Makefile
creating m4/Makefile
creating src/Makefile
creating src/include/Makefile
creating src/lib/Makefile
creating src/test/Makefile
creating src/debug/Makefile
creating src/qgen/Makefile
creating src/saal/Makefile
creating src/sigd/Makefile
creating src/maint/Makefile
creating src/arpd/Makefile
creating src/ilmid/Makefile
creating src/ilmid/asn1/Makefile
creating src/man/Makefile
creating src/led/Makefile
creating src/lane/Makefile
creating src/mpoad/Makefile
creating src/switch/Makefile
creating src/switch/debug/Makefile
creating src/switch/tcp/Makefile
creating src/config/Makefile
creating src/config/init-redhat/Makefile
creating src/extra/Makefile
creating src/extra/linux-atm.spec
creating src/extra/ANS/Makefile
creating config.h
make  all-recursive
make[1]: Entering directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1'
Making all in m4
make[2]: Entering directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/m4'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/m4'
Making all in src
make[2]: Entering directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src'
Making all in include
make[3]: Entering directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src/include'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src/include'
Making all in lib
make[3]: Entering directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src/lib'
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2atm.c
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2atm.c  -fPIC -DPIC -o .libs/text2atm.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2atm.c -o text2atm.o >/dev/null 2>&1
mv -f .libs/text2atm.lo text2atm.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c atm2text.c
rm -f .libs/atm2text.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c atm2text.c  -fPIC -DPIC -o .libs/atm2text.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c atm2text.c -o atm2text.o >/dev/null 2>&1
mv -f .libs/atm2text.lo atm2text.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c atmequal.c
rm -f .libs/atmequal.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c atmequal.c  -fPIC -DPIC -o .libs/atmequal.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c atmequal.c -o atmequal.o >/dev/null 2>&1
mv -f .libs/atmequal.lo atmequal.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sdu2cell.c
rm -f .libs/sdu2cell.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sdu2cell.c  -fPIC -DPIC -o .libs/sdu2cell.lo
sdu2cell.c: In function 'sdu2cell':
sdu2cell.c:21: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sdu2cell.c -o sdu2cell.o >/dev/null 2>&1
mv -f .libs/sdu2cell.lo sdu2cell.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2qos.c
rm -f .libs/text2qos.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2qos.c  -fPIC -DPIC -o .libs/text2qos.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2qos.c -o text2qos.o >/dev/null 2>&1
mv -f .libs/text2qos.lo text2qos.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c qos2text.c
rm -f .libs/qos2text.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c qos2text.c  -fPIC -DPIC -o .libs/qos2text.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c qos2text.c -o qos2text.o >/dev/null 2>&1
mv -f .libs/qos2text.lo qos2text.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c qosequal.c
rm -f .libs/qosequal.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c qosequal.c  -fPIC -DPIC -o .libs/qosequal.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c qosequal.c -o qosequal.o >/dev/null 2>&1
mv -f .libs/qosequal.lo qosequal.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sap2text.c
rm -f .libs/sap2text.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sap2text.c  -fPIC -DPIC -o .libs/sap2text.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sap2text.c -o sap2text.o >/dev/null 2>&1
mv -f .libs/sap2text.lo sap2text.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2sap.c
rm -f .libs/text2sap.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2sap.c  -fPIC -DPIC -o .libs/text2sap.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2sap.c -o text2sap.o >/dev/null 2>&1
mv -f .libs/text2sap.lo text2sap.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sapequal.c
rm -f .libs/sapequal.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sapequal.c  -fPIC -DPIC -o .libs/sapequal.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c sapequal.c -o sapequal.o >/dev/null 2>&1
mv -f .libs/sapequal.lo sapequal.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c misc.c
rm -f .libs/misc.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c misc.c  -fPIC -DPIC -o .libs/misc.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c misc.c -o misc.o >/dev/null 2>&1
mv -f .libs/misc.lo misc.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ans.c
rm -f .libs/ans.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ans.c  -fPIC -DPIC -o .libs/ans.lo
ans.c: In function 'ans':
ans.c:65: warning: pointer targets in passing argument 4 of '__dn_expand' differ in signedness
ans.c:80: warning: pointer targets in passing argument 4 of '__dn_expand' differ in signedness
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ans.c -o ans.o >/dev/null 2>&1
mv -f .libs/ans.lo ans.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c common.c
rm -f .libs/common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c common.c  -fPIC -DPIC -o .libs/common.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c common.c -o common.o >/dev/null 2>&1
mv -f .libs/common.lo common.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c diag.c
rm -f .libs/diag.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c diag.c  -fPIC -DPIC -o .libs/diag.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c diag.c -o diag.o >/dev/null 2>&1
mv -f .libs/diag.lo diag.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c kptr.c
rm -f .libs/kptr.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c kptr.c  -fPIC -DPIC -o .libs/kptr.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c kptr.c -o kptr.o >/dev/null 2>&1
mv -f .libs/kptr.lo kptr.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2ip.c
rm -f .libs/text2ip.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2ip.c  -fPIC -DPIC -o .libs/text2ip.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c text2ip.c -o text2ip.o >/dev/null 2>&1
mv -f .libs/text2ip.lo text2ip.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c timer.c
rm -f .libs/timer.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c timer.c  -fPIC -DPIC -o .libs/timer.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c timer.c -o timer.o >/dev/null 2>&1
mv -f .libs/timer.lo timer.lo
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c unix.c
rm -f .libs/unix.lo
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c unix.c  -fPIC -DPIC -o .libs/unix.lo
unix.c: In function 'un_recv_connect':
unix.c:70: warning: pointer targets in passing argument 6 of 'recvfrom' differ in signedness
unix.c: In function 'un_recv':
unix.c:81: warning: pointer targets in passing argument 6 of 'recvfrom' differ in signedness
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c unix.c -o unix.o >/dev/null 2>&1
mv -f .libs/unix.lo unix.lo
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -version-info 1:0:0 -o libatm.la -rpath /usr/lib64  text2atm.lo atm2text.lo atmequal.lo sdu2cell.lo text2qos.lo qos2text.lo qosequal.lo sap2text.lo text2sap.lo sapequal.lo misc.lo ans.lo common.lo diag.lo kptr.lo text2ip.lo timer.lo unix.lo -lresolv
rm -fr .libs/libatm.la .libs/libatm.* .libs/libatm.*
gcc -shared  text2atm.lo atm2text.lo atmequal.lo sdu2cell.lo text2qos.lo qos2text.lo qosequal.lo sap2text.lo text2sap.lo sapequal.lo misc.lo ans.lo common.lo diag.lo kptr.lo text2ip.lo timer.lo unix.lo  -lresolv  -Wl,-soname -Wl,libatm.so.1 -o .libs/libatm.so.1.0.0
(cd .libs && rm -f libatm.so.1 && ln -s libatm.so.1.0.0 libatm.so.1)
(cd .libs && rm -f libatm.so && ln -s libatm.so.1.0.0 libatm.so)
ar cru .libs/libatm.a  text2atm.o atm2text.o atmequal.o sdu2cell.o text2qos.o qos2text.o qosequal.o sap2text.o text2sap.o sapequal.o misc.o ans.o common.o diag.o kptr.o text2ip.o timer.o unix.o
ranlib .libs/libatm.a
creating libatm.la
(cd .libs && rm -f libatm.la && ln -s ../libatm.la libatm.la)
make[3]: Leaving directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src/lib'
Making all in test
make[3]: Entering directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src/test'
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c aread.c
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o aread  aread.o ../../src/lib/libatm.la
mkdir .libs
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/aread aread.o  ../../src/lib/.libs/libatm.so -lresolv -Wl,--rpath -Wl,/usr/lib64
creating aread
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c awrite.c
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o awrite  awrite.o ../../src/lib/libatm.la
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/awrite awrite.o  ../../src/lib/.libs/libatm.so -lresolv -Wl,--rpath -Wl,/usr/lib64
creating awrite
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ttcp.c
ttcp.c:164: warning: function declaration isn't a prototype
ttcp.c:165: warning: function declaration isn't a prototype
ttcp.c:166: warning: function declaration isn't a prototype
ttcp.c:167: warning: function declaration isn't a prototype
ttcp.c:168: warning: function declaration isn't a prototype
ttcp.c:169: warning: function declaration isn't a prototype
ttcp.c:170: warning: function declaration isn't a prototype
ttcp.c:171: warning: function declaration isn't a prototype
ttcp.c:172: warning: function declaration isn't a prototype
ttcp.c:173: warning: function declaration isn't a prototype
ttcp.c:174: warning: function declaration isn't a prototype
ttcp.c:175: warning: function declaration isn't a prototype
ttcp.c:176: warning: function declaration isn't a prototype
ttcp.c:177: warning: function declaration isn't a prototype
ttcp.c:181: warning: function declaration isn't a prototype
ttcp.c:190: warning: return type defaults to 'int'
ttcp.c:190: warning: function declaration isn't a prototype
ttcp.c: In function 'main':
ttcp.c:291: warning: passing argument 2 of 'strtoul' from incompatible pointer type
ttcp.c:281: warning: suggest explicit braces to avoid ambiguous 'else'
ttcp.c:368: warning: cast from pointer to integer of different size
ttcp.c:423: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
ttcp.c:432: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
ttcp.c:441: warning: pointer type mismatch in conditional expression
ttcp.c:459: warning: pointer type mismatch in conditional expression
ttcp.c:488: warning: passing argument 2 of 'accept' from incompatible pointer type
ttcp.c:488: warning: pointer targets in passing argument 3 of 'accept' differ in signedness
ttcp.c:495: warning: passing argument 2 of 'getpeername' from incompatible pointer type
ttcp.c:495: warning: pointer targets in passing argument 3 of 'getpeername' differ in signedness
ttcp.c:648: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
ttcp.c:652: warning: format '%#x' expects type 'unsigned int', but argument 4 has type 'char *'
ttcp.c: At top level:
ttcp.c:663: warning: function declaration isn't a prototype
ttcp.c:677: warning: function declaration isn't a prototype
ttcp.c:688: warning: return type defaults to 'int'
ttcp.c:688: warning: function declaration isn't a prototype
ttcp.c:702: warning: function declaration isn't a prototype
ttcp.c:765: warning: function declaration isn't a prototype
ttcp.c:775: warning: function declaration isn't a prototype
ttcp.c:796: warning: function declaration isn't a prototype
ttcp.c: In function 'prusage':
ttcp.c:819: warning: assignment discards qualifiers from pointer target type
ttcp.c:829: warning: format '%d' expects type 'int', but argument 3 has type '__time_t'
ttcp.c:829: warning: format '%01d' expects type 'int', but argument 4 has type '__suseconds_t'
ttcp.c:835: warning: format '%d' expects type 'int', but argument 3 has type '__time_t'
ttcp.c:835: warning: format '%01d' expects type 'int', but argument 4 has type '__suseconds_t'
ttcp.c:857: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:863: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:870: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:875: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:880: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:885: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:890: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:895: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:900: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
ttcp.c:900: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
ttcp.c: At top level:
ttcp.c:911: warning: function declaration isn't a prototype
ttcp.c:926: warning: function declaration isn't a prototype
ttcp.c:939: warning: function declaration isn't a prototype
ttcp.c:965: warning: return type defaults to 'int'
ttcp.c:965: warning: function declaration isn't a prototype
ttcp.c: In function 'Nread':
ttcp.c:965: warning: declaration of 'fd' shadows a global declaration
ttcp.c:93: warning: shadowed declaration is here
ttcp.c:966: warning: declaration of 'buf' shadows a global declaration
ttcp.c:96: warning: shadowed declaration is here
ttcp.c:970: warning: unused variable 'len'
ttcp.c: At top level:
ttcp.c:1001: warning: return type defaults to 'int'
ttcp.c:1001: warning: function declaration isn't a prototype
ttcp.c: In function 'Nwrite':
ttcp.c:1001: warning: declaration of 'fd' shadows a global declaration
ttcp.c:93: warning: shadowed declaration is here
ttcp.c:1002: warning: declaration of 'buf' shadows a global declaration
ttcp.c:96: warning: shadowed declaration is here
ttcp.c:1010: warning: passing argument 5 of 'sendto' from incompatible pointer type
ttcp.c: At top level:
ttcp.c:1027: warning: function declaration isn't a prototype
ttcp.c: In function 'delay':
ttcp.c:1032: warning: passing argument 2 of 'select' from incompatible pointer type
ttcp.c:1032: warning: passing argument 3 of 'select' from incompatible pointer type
ttcp.c:1032: warning: passing argument 4 of 'select' from incompatible pointer type
ttcp.c: At top level:
ttcp.c:1046: warning: function declaration isn't a prototype
ttcp.c: In function 'mread':
ttcp.c:1046: warning: declaration of 'fd' shadows a global declaration
ttcp.c:93: warning: shadowed declaration is here
ttcp.c: In function 'pattern':
ttcp.c:697: warning: control reaches end of non-void function
ttcp.c: At top level:
ttcp.c:48: warning: 'RCSid' defined but not used
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o ttcp_atm  ttcp.o ../../src/lib/libatm.la
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/ttcp_atm ttcp.o  ../../src/lib/.libs/libatm.so -lresolv -Wl,--rpath -Wl,/usr/lib64
creating ttcp_atm
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c align.c
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o align  align.o ../../src/lib/libatm.la
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/align align.o  ../../src/lib/.libs/libatm.so -lresolv -Wl,--rpath -Wl,/usr/lib64
creating align
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c aping.c
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o aping  aping.o ../../src/lib/libatm.la
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/aping aping.o  ../../src/lib/.libs/libatm.so -lresolv -Wl,--rpath -Wl,/usr/lib64
creating aping
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c br.c
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o br  br.o ../../src/lib/libatm.la
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/br br.o  ../../src/lib/.libs/libatm.so -lresolv -Wl,--rpath -Wl,/usr/lib64
creating br
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c bw.c
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o bw  bw.o ../../src/lib/libatm.la
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/bw bw.o  ../../src/lib/.libs/libatm.so -lresolv -Wl,--rpath -Wl,/usr/lib64
creating bw
/usr/bin/perl ./mkerrnos.pl </usr/include/asm/errno.h \
      >errnos.inc || { rm -f errnos.inc; exit 1; }
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c isp.c
isp.c: In function 'send_msg':
isp.c:40: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
isp.c: In function 'recv_msg':
isp.c:52: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int'
bison -y -d   ispl_y.y && mv y.tab.c ispl_y.c
ispl_y.y:37.28-37: warning: symbol TOK_LISTEN redeclared
if test -f y.tab.h; then \
   if cmp -s y.tab.h ispl_y.h; then rm -f y.tab.h; else mv y.tab.h ispl_y.h; fi; \
   else :; fi
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ispl_y.c
gcc -DHAVE_CONFIG_H -I. -I. -I../..     -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c ispl_l.c
In file included from ispl_l.l:7:
../../config.h:15:1: warning: "YY_USE_CONST" redefined
ispl_l.c:38:1: warning: this is the location of the previous definition
lex.yy.c:1343: warning: 'yyunput' defined but not used
/bin/sh ../../libtool --mode=link gcc  -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes  -o isp  isp.o ispl_y.o ispl_l.o ../../src/lib/libatm.la -lfl
gcc -I../../src/include -O2 -pipe -fno-strict-aliasing -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -o .libs/isp isp.o ispl_y.o ispl_l.o  ../../src/lib/.libs/libatm.so -lresolv -lfl -Wl,--rpath -Wl,/usr/lib64
/usr/lib/gcc/x86_64-pc-linux-gnu/4.1.2/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lfl
collect2: ld returned 1 exit status
make[3]: *** [isp] Error 1
make[3]: Leaving directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src/test'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/work/linux-atm-2.4.1'
make: *** [all-recursive-am] Error 2
 *
 * ERROR: net-dialup/linux-atm-2.4.1-r2 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 2660:  Called die
 * The specific snippet of code:
 *       emake || die "emake failed"
 *  The die message:
 *   emake failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/temp/environment'.
 *

 * Messages for package net-dialup/linux-atm-2.4.1-r2:

 *
 * ERROR: net-dialup/linux-atm-2.4.1-r2 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 2660:  Called die
 * The specific snippet of code:
 *       emake || die "emake failed"
 *  The die message:
 *   emake failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-dialup/linux-atm-2.4.1-r2/temp/environment'.
 *
localhost ~ #


Merci d'avance
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Fri Sep 19, 2008 10:31 pm    Post subject: Reply with quote

Euh... la version de linux-atm que tu essaies d'installer n'est pas la dernière en date... c'est net-dialup/linux-atm-2.5.0 la stable pour toutes architectures... fais un emerge --sync , une bonne mise à jour par emerge -uDNa world et ré emerge enfin linux-atm
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
Slashounet
Tux's lil' helper
Tux's lil' helper


Joined: 13 Jan 2006
Posts: 87
Location: /home/ounet

PostPosted: Fri Sep 19, 2008 10:57 pm    Post subject: Reply with quote

Difficile de faire un emerge --sync puis MàJ sans connexion Internet :)

/ounet
_________________
pif paf pouf !
\\o \o/ o//
Back to top
View user's profile Send private message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Sat Sep 20, 2008 12:06 am    Post subject: Reply with quote

Salut,
j'ai réussi en faisant un 'emerge flex' avant, Merci en tout cas...
Maintenant je suis bien connecté, mais j'arrive pas consulter des pages web, comme s'il y a un firewall ou un proxy qui bloque ma connection, mais je sais pas quoi faire??!!
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Sat Sep 20, 2008 8:44 am    Post subject: Reply with quote

Slashounet wrote:
Difficile de faire un emerge --sync puis MàJ sans connexion Internet :)

/ounet


oui c'est sûr ! :lol: mais je pensais qu'il avait retrouvé sa connexion vu qu'il avait une erreur de compil sur linux-atm...

Essaies de booter et de configurer ta connexion internet depuis un livecd d'ubuntu par exemple, et si ubuntu reconnait ton modem usb et que tout est ok, tu peux carrément te tenter l'install de gentoo depuis le livecd d ubuntu...

EDIT: donnes nous quand même la sortie de :
ifconfig -a
et
cat /etc/resolv.conf (après avoir fait le chroot)
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Sat Sep 20, 2008 2:05 pm    Post subject: Reply with quote

Code:
localhost ~ # cat /etc/resolv.conf
nameserver 217.217.0.1
nameserver 217.217.0.12
localhost ~ #           
localhost ~ # ifconfig -a
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

ppp0      Link encap:Point-to-Point Protocol 
          inet addr:196.217.224.141  P-t-P:196.217.224.1  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:5 errors:0 dropped:0 overruns:0 frame:0
          TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:1062 (1.0 Kb)  TX bytes:4169 (4.0 Kb)

localhost ~ #                     


Merci d'avance
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Sat Sep 20, 2008 2:18 pm    Post subject: Reply with quote

Donc a priori le problème vient de ton interface eth0 qui n'apparait pas...
il faut que tu te replonges dans là doc pour la configurer (net-setup de mémoire) tu peux lui assigner une adresse de type: 192.168.1.4 (pas besoin de dhcp) avec une adresse de diffusion 192.168.1.255 et un masque de sous réseau 255.255.255.0 une fois configurée fais à nouveau ifconfig -a ==> tu dois la trouver !
Tu peux essayer aussi /etc/init.d/net.eth0 start pour forcer son redémarrage si après net-setup ça n'a pas marché et qu'elle n'est toujours pas visible

ex chez moi :
Code:

laboussole Desktop # ifconfig -a
eth0      Lien encap:Ethernet  HWaddr 00:11:09:8E:97:D2 
          inet adr:192.168.1.4  Bcast:192.168.1.255  Masque:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:56783 errors:0 dropped:0 overruns:0 frame:0
          TX packets:38405 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:70661928 (67.3 Mb)  TX bytes:4359856 (4.1 Mb)
          Interruption:23 Adresse de base:0xcb00

lo        Lien encap:Boucle locale 
          inet adr:127.0.0.1  Masque:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:7488 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7488 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:4665340 (4.4 Mb)  TX bytes:4665340 (4.4 Mb)

ppp0      Lien encap:Protocole Point-à-Point 
          inet adr:86.201.143.125  P-t-P:193.253.160.3  Masque:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:56558 errors:0 dropped:0 overruns:0 frame:0
          TX packets:38181 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:3
          RX bytes:69404060 (66.1 Mb)  TX bytes:3513089 (3.3 Mb)

tu dois bien avoir 3 interfaces ppp0 ton modem, eth0 ta carte réseau et lo la boucle locale
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Sat Sep 20, 2008 2:57 pm    Post subject: Reply with quote

Mais je suis sur ppp0A et pas ppp0E!!!!!!!
et l'interface eth0 c'est sur ppp0E n'est ce pas??
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Sat Sep 20, 2008 4:50 pm    Post subject: Reply with quote

ben écoute je suis pas un spécialiste de pppoA mais ça me surprend que tu n'aies pas besoin d'interface ethernet...
Je suis en pppoE avec un modem combo ethernet/usb (branché bien sûr en ethernet puisque j'ai le choix)
J'ai bien une eth0 lorsqu'il est branché en ethernet et si je le branche en usb elle s'appelle eth1... pppoE / pppoA ce n'est qu'une différence de protocole dans la transmission des données pour moi mais peut être que je me trompe...
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
YassBoss
n00b
n00b


Joined: 18 Sep 2008
Posts: 8

PostPosted: Sat Sep 20, 2008 9:58 pm    Post subject: Reply with quote

Salut, J'ai réglé le problème...je me suis trompé en tapant les DNS...
Merci en tous cas...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum