Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Moving from 2.4 to 2.6 guide
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
roofy
Tux's lil' helper
Tux's lil' helper


Joined: 01 Sep 2003
Posts: 86
Location: miami

PostPosted: Thu Sep 04, 2003 5:16 pm    Post subject: Reply with quote

Quote:
For better driver support you must tell them which driver you want included to be sure that it gets their attention.


well that site is for 2.5, should i report it anyway?
_________________
/* event horizon */
Athlon XP 2100+ (o/c'ed to 2.1ghz)
LanParty NForce2 Ultra
80GB Maxtor HD
48x CD-RW
ATI 9700 Pro
Back to top
View user's profile Send private message
roofy
Tux's lil' helper
Tux's lil' helper


Joined: 01 Sep 2003
Posts: 86
Location: miami

PostPosted: Thu Sep 04, 2003 5:19 pm    Post subject: Reply with quote

Quote:
For better driver support you must tell them which driver you want included to be sure that it gets their attention.


well that site is for 2.5, should i report it anyway?
_________________
/* event horizon */
Athlon XP 2100+ (o/c'ed to 2.1ghz)
LanParty NForce2 Ultra
80GB Maxtor HD
48x CD-RW
ATI 9700 Pro
Back to top
View user's profile Send private message
roofy
Tux's lil' helper
Tux's lil' helper


Joined: 01 Sep 2003
Posts: 86
Location: miami

PostPosted: Thu Sep 04, 2003 5:25 pm    Post subject: Reply with quote

Quote:
For better driver support you must tell them which driver you want included to be sure that it gets their attention.


well that site is for 2.5, should i report it anyway?
_________________
/* event horizon */
Athlon XP 2100+ (o/c'ed to 2.1ghz)
LanParty NForce2 Ultra
80GB Maxtor HD
48x CD-RW
ATI 9700 Pro
Back to top
View user's profile Send private message
mile_slo
Tux's lil' helper
Tux's lil' helper


Joined: 29 Apr 2003
Posts: 91
Location: Ljubljana, Slovenia

PostPosted: Thu Sep 04, 2003 6:47 pm    Post subject: Reply with quote

Anybody knows, when mppe patch will be ready for 2.6 kernels?
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Thu Sep 04, 2003 8:16 pm    Post subject: Re: nvidia geforce drivers Reply with quote

hulmeman wrote:
nvidia-kernel_1.0.4496-r1 failed.

Use the one created by a gentoo developer here.
_________________
http://dhruba.name/
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Thu Sep 04, 2003 8:18 pm    Post subject: Reply with quote

roofy wrote:
well that site is for 2.5, should i report it anyway?

Yes. http://bugzilla.kernel.org/ is for all 2.5.x and 2.6.x kernels.
_________________
http://dhruba.name/
Back to top
View user's profile Send private message
FINITE
Guru
Guru


Joined: 10 May 2002
Posts: 449

PostPosted: Fri Sep 05, 2003 11:14 am    Post subject: Reply with quote

Ok, I want to get in on the 2.6 kernel goodness. Have a few questions before I start the process. If I go into make menuconfig with the 2.4 series kernel and save the config to 'an alternate location' will I be able to load that config when I go to compile the 2.6 kernel? Call me lazy but I don't want to have to go though and hand select all of my options. If there is no choice then so be it. Then there is the question about making the symlink, I didn't need to do this with the 2.4 series kernel, why would I need to with the 2.6 series? Which one should I go with, the mm sources or the standard 2.6? Thats about it, sure I can figure out any problems that pop up along the way if any. Thanks.
Back to top
View user's profile Send private message
Narada
Guru
Guru


Joined: 12 Dec 2002
Posts: 300
Location: London, UK

PostPosted: Fri Sep 05, 2003 11:27 am    Post subject: Reply with quote

FINITE: Kernel options: I would strongly recommend against migrating 2.4 kernel config to a 2.6 kernel. Generally, the rule is migrate config between the same numerical branch but not across different branches. The old options have been radically changed and there are a whole multitude of new options. Even if you do copy old config over and do 'make oldconfig' you will be asked many questions on the command line about option choices. Start fresh with configuration options and do 'make mrproper' before you begin. Symlinks: Symlinks are necessary for both 2.4 and 2.6 kernels. Create two symlinks for the 2.6 kernel that you will use: (1) /usr/src/linux and (2) /usr/src/linux-beta. These symlinks are sometimes depended upon by certain packages/ebuilds to determine which kernel to compile against such as nvidia-kernel/glx. The symlinks are basically used as a systemwide indication of which kernel sources are currently in use so are recommended. Which 2.6 kernel: Initially, I would say try the vanilla (plain) 2.6 kernel, get it working and fine tune configuration options and boot parameters if necessary. Once you have a robust .config file you can migrate it to any other variant of the 2.6 kernel including mm. The latest version as of now of vanilla dev sources is 2.6.0-test4-bk6. My decision has been to install my kernel myself rather than getting it from portage as that allows much greater freedom and also prevents kernels being outdated when portage bumps take time. HTH.
_________________
http://dhruba.name/
Back to top
View user's profile Send private message
FINITE
Guru
Guru


Joined: 10 May 2002
Posts: 449

PostPosted: Fri Sep 05, 2003 12:56 pm    Post subject: Reply with quote

Thanks for the info Narada. I was going to do everything from work but I forgot to reconfigure my firewall to allow ssh. This really sucks, wanted to get everything running before I got home. :(
Back to top
View user's profile Send private message
icecube
n00b
n00b


Joined: 30 Oct 2002
Posts: 34

PostPosted: Fri Sep 19, 2003 2:20 am    Post subject: IMPORTANT: PROMISE Ultra 133 TX2 under 2.6.0-test5 Reply with quote

I have been at this for two days trying to get 2.6.0-test5 set up correctly. I see a lot of people having some similar problems. I got a wild hair and wondered if my TX2 bios was up to date. Well I went to http://www.promise.com/support/download/download2_eng.asp?productId=87&category=bios&os=0 and downloaded and updated my bios to 2.20.0.15. Don't forget to back up the old one. Well before I updated the bios, the 3 partitions that I had on my Maxtor drive could not be mounted during boot, no matter what I did or how I compiled the kernel (as I said I've been trying for 2 days - got a day off for the hurricane). After I updated the bios, the partitions were recognized and even better yet in the 2.4.22 kernel I get "PDC20269: not 100% native mode: will probe irqs later" on boot even after the new bios was installed. With the 2.6.0-test5 kernel I get "PDC20269: 100% native mode on irq 23" even before the bois was installed. Native has to be better than not 100% native. Lesson - when having problems, check bios updates. Hope this helps someone else since it took me so long to figure it out.
_________________
Friday is a good day.
Back to top
View user's profile Send private message
icecube
n00b
n00b


Joined: 30 Oct 2002
Posts: 34

PostPosted: Fri Sep 19, 2003 2:41 am    Post subject: Reply with quote

I also found that in order for terminals to work, you do need "Unix98 PTY Support" under "Character devices" and "/dev/pts file system for Unix98 PTYs" under "File systems -> Pseudo filesystems". Hope this helps someone else too. The last thing I have to do is get Intel e100 driver to work. Guess I will emerge the driver instead of using the one in the kernel. If anyone has any info on this, please share. Also if anyone has any trick on vmware running on 2.6, this is the last thing I need before a full switch. Thanks.
_________________
Friday is a good day.
Back to top
View user's profile Send private message
icecube
n00b
n00b


Joined: 30 Oct 2002
Posts: 34

PostPosted: Fri Sep 19, 2003 4:39 am    Post subject: Reply with quote

Solved my own problem with e100 module. When module-init-tools is installed it changes the way modules are autoloaded. Instead of having a /etc/modules.autoload file there is the /etc/modules.autoload.d directory (which by the way was present before 2.6) which contains kernel-2.x files that hold the modules to autoload for the particular kernel that is loaded. I also found a link to fix VMware (http://thomer.com/linux/migrate-to-2.6.html), but I haven't tried it yet. Will check the Gentoo forums to and post if it works.

Once you get to understand this kernal and how it works, it rocks. Compiling is a breeze. Can't wait for stable.
_________________
Friday is a good day.
Back to top
View user's profile Send private message
m00re
n00b
n00b


Joined: 17 Jun 2002
Posts: 65
Location: Germany

PostPosted: Fri Sep 19, 2003 1:36 pm    Post subject: Reply with quote

is there a solution on how to get lm-sensors working width a 2.6.0 kernel? i cannot compile either 2.7.0 nor 2.8.0 of lm-sensors... and when i try to fetch the stats of my sensors (i still have got a compiled version of 2.7.0 on my system) by running "sensors", i get an error about not being able to read from the /proc/busses/i2c (which doesn't exist). there's also missing the module i2c-proc (which exists in 2.4.x), and i dont find it in the config for kernel-2.6.0.

and in addition to that, i dont get a working terminal in X (starting from fluxbox menu), but i am sure to have everything enabled for it. my kernel config can be read at http://www.m00re.de/kernel.config

greets, Jens

ps: the vmware fix is working.
_________________
"Fall seven times, stand up eight."
Back to top
View user's profile Send private message
Koala Kid
Guru
Guru


Joined: 09 May 2003
Posts: 381

PostPosted: Mon Sep 22, 2003 4:37 pm    Post subject: Reply with quote

hmmmmm.....

Code:

root@frontline bungle # emerge sys-kernel/development-sources
Calculating dependencies ...done!
>>> emerge (1 of 2) sys-apps/module-init-tools-0.9.12-r1 to /
>>> Downloading http://gentoo.oregonstate.edu/distfiles/module-init-tools-0.9.12.tar.bz2
--19:34:45--  http://gentoo.oregonstate.edu/distfiles/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving gentoo.oregonstate.edu... done.
Connecting to gentoo.oregonstate.edu[128.193.0.3]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:46 ERROR 404: Not Found.
 
>>> Downloading http://distro.ibiblio.org/pub/Linux/distributions/gentoo/distfiles/module-init-tools-0.9.12.tar.bz2
--19:34:46--  http://distro.ibiblio.org/pub/Linux/distributions/gentoo/distfiles/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving distro.ibiblio.org... done.
Connecting to distro.ibiblio.org[152.2.210.109]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:47 ERROR 404: Not Found.
 
>>> Downloading http://www.uk.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
--19:34:47--  http://www.uk.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving www.uk.kernel.org... done.
Connecting to www.uk.kernel.org[194.117.158.28]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:48 ERROR 404: Not Found.
 
>>> Downloading http://www.fr.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
--19:34:48--  http://www.fr.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving www.fr.kernel.org... done.
Connecting to www.fr.kernel.org[212.180.1.39]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:48 ERROR 404: Not Found.
 
>>> Downloading http://www.de.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
--19:34:48--  http://www.de.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving www.de.kernel.org... done.
Connecting to www.de.kernel.org[129.143.116.10]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:49 ERROR 404: Not Found.
 
>>> Downloading http://www.us.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
--19:34:49--  http://www.us.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving www.us.kernel.org... done.
Connecting to www.us.kernel.org[209.221.142.122]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:49 ERROR 404: Not Found.
 
>>> Downloading http://www.at.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
--19:34:49--  http://www.at.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving www.at.kernel.org... done.
Connecting to www.at.kernel.org[62.116.33.4]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:50 ERROR 404: Not Found.
 
>>> Downloading http://www.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
--19:34:50--  http://www.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tools-0.9.12.tar.bz2
           => `/usr/portage/distfiles/module-init-tools-0.9.12.tar.bz2'
Resolving www.kernel.org... done.
Connecting to www.kernel.org[204.152.189.116]:80... connected.
HTTP request sent, awaiting response... 404 Not Found
19:34:50 ERROR 404: Not Found.
 
!!! Couldn't download module-init-tools-0.9.12.tar.bz2. Aborting.
root@frontline bungle #



what's wrong here ?

thank you 8)
Back to top
View user's profile Send private message
KiTaSuMbA
Guru
Guru


Joined: 28 Jun 2002
Posts: 430
Location: Naples Italy

PostPosted: Mon Sep 22, 2003 9:51 pm    Post subject: Reply with quote

They are removed...
ACCEPT_KEYWORDS="~x86" will solve this as it gets the .15-pre1 package still there.
_________________
Need to flame people LIVE on IRC? Join #gentoo-otw on freenode!
Back to top
View user's profile Send private message
KiTaSuMbA
Guru
Guru


Joined: 28 Jun 2002
Posts: 430
Location: Naples Italy

PostPosted: Mon Sep 22, 2003 10:47 pm    Post subject: Reply with quote

water wrote:
sdriesner wrote:

Any ideas? Your help would be greatly appreciated. Thanks.


Disable "mount at boot"
On a Knoppix-system, it did the trick for me.

and if you not already have this:
Code:

rc-update add devfsd boot

Similar troubles here tonight with 2.6.0-test5-mm4 and an xfs root system. But what about rc-update?
Code:
# rc-update add devfsd boot
 * /sbin/rc-update: /etc/init.d/devfsd not found; aborting.

Huh? What's that about?
_________________
Need to flame people LIVE on IRC? Join #gentoo-otw on freenode!
Back to top
View user's profile Send private message
abombss
n00b
n00b


Joined: 20 Jun 2002
Posts: 12
Location: Chicago, IL

PostPosted: Tue Sep 23, 2003 3:39 am    Post subject: 2.6 radeonfb Reply with quote

Well, it has been quite some time since I compiled a kernel. I got fed up with my ati 8500 sucking so bad in 2.4 that I opted to spend time and learn solaris on a sparc. Anyway, yesterday I decided to reinstall Gentoo on x86.

Warning: Long story and rambling ahead!

I was very impressed with livecd, smp, and framebuffer support. Kudos to Gentoo, the best distro, and now with cool eye candy!! Needless to say I bootstraped from stage 1 and was on my way in no time. When it came time for the kernel I elected for gentoo 2.4.2 sources, previously I ran 2.4.0 vanilla. I was excited for the updated radeonfb patch!

When I booted I was amazed that the radeon framebuffer worked, I was in 1024x768@85 and I saw penguin!! Then things started locking up. Of course I had no boot disk, just livecd so I rebuilt a new kernel. I did this again and again and again and again and again (see a pattern). I could not figure why I was randomly locking up, I tried several configs, even bare minimal non smp configs.

Needless to say I was... :(

Anyway I spotted this thread and thought I should take a stab at the mm3-test5 sources. I just finished the install and I feel... :D

Everything is detected and seems to be working... Haven't messed with X yet :roll:

But, now my radeonfb doesn't seem to be working. Anyone else have this problem. Linux detects and loads the radeonfb fine, but it doesn't switch modes, I am stuck at 640x480. Any thoughts on modedb or fb.modes??

Bottom line... after 15 minutes of 2.6 I am in love... I might follow-up in a couple hours after I build X and Gnome and get pissed about my ati all in wonder being everything but wonderful, but hey this still beats microsuck!

Seriously, anyone have experience with running framebuffers other than vesa?

--abombss
Back to top
View user's profile Send private message
jaska
Bodhisattva
Bodhisattva


Joined: 06 Jun 2003
Posts: 725
Location: Finland

PostPosted: Wed Sep 24, 2003 3:47 pm    Post subject: Reply with quote

Sorry to ask but, which ebuild of the 2.6 kernel should I go for? mm-sources or development-sources? Planning to test out 2.6 this weekend.
Back to top
View user's profile Send private message
Koala Kid
Guru
Guru


Joined: 09 May 2003
Posts: 381

PostPosted: Wed Sep 24, 2003 6:09 pm    Post subject: Reply with quote

jaska wrote:
Sorry to ask but, which ebuild of the 2.6 kernel should I go for? mm-sources or development-sources? Planning to test out 2.6 this weekend.


sys-kernel/development-sources
Back to top
View user's profile Send private message
Koala Kid
Guru
Guru


Joined: 09 May 2003
Posts: 381

PostPosted: Wed Sep 24, 2003 6:13 pm    Post subject: Reply with quote

well.... new day - new troubles.

the new kernel seems to be working but X doesn't start
Code:

(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
   compiled for 4.3.0, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD0000000
(--) NVIDIA(0): MMIO registers at 0xD8000000
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0):  *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.


/usr/src/linux is symlinked to the new kernel...

any solution ?

thank you :lol:

P.S.: i've installed nvidia-glx and nvidia-kernel
Back to top
View user's profile Send private message
Master_Of_Disaster
l33t
l33t


Joined: 28 Feb 2003
Posts: 610
Location: 15.05072° East, 48.13747° North (aka Mauer), Austria

PostPosted: Thu Sep 25, 2003 12:06 pm    Post subject: Reply with quote

Has someone managed to get lm_sensors and lirc to run with 2.6? (I use 2.6.0-test5-mm4) Apparently (damn I'm really impressed) everything else seems to work...
_________________
post tenebras lux, post fenestras tux
Registered Linux User Nr. 312509
Adopt an unanswered post today!
Back to top
View user's profile Send private message
monicajae
Guru
Guru


Joined: 03 Sep 2003
Posts: 363
Location: Dorset, VT

PostPosted: Sun Oct 05, 2003 4:54 am    Post subject: Reply with quote

2.6.0-test5-bk8

here's my experience: and a question...why is it that when i ran a 2.4.22 kernel on a slackware 9.1 distribution alsa worked perfectly? when i upgraded to the 2.6.test5 kern and enabled alsa as mod's it didn't, but then i hardcoded it in the kernel and voila, sound!

then comes gentoo...2.4.22-pre2 emerge alsa no sound ... upgrade to 2.6.test5 no sound ?? what is the difference? it's still the same soundcard. the same drivers...same alsa? so, what's the problem? i want sound, dammit, and when i listen to live streaming music, via OSS, after about five minutes, it freezes, and you know what? the gentoo developers can't even help me, telling me, this isn't a gentoo bug. Fcuk yeah it is!! i, like some other people, want to take advantage of the digital qualities and strengths that alsa offers. so, what can i do? can someone tell me? do i just go back to Slackware? do i tell pat volkerding he rocks?
_________________
"Conformity is the jailer of freedom and the enemy of growth." -- John F. Kennedy

"Those who dare to fail miserably can achieve greatly." -- John F. Kennedy
Back to top
View user's profile Send private message
RedDawn
Guru
Guru


Joined: 22 Sep 2003
Posts: 368
Location: Los Angeles, California

PostPosted: Sun Oct 05, 2003 10:49 am    Post subject: Wholy Crap!! Reply with quote

WOW this is cool i started using Gentoo like 1 mounth ago using Kernel 2.4.20 now im using Kernel 2.6.0TEST6 and i LOVE IT!!!!! WOW.... is so fast!! my first compoile went with no prob all i had to do is emerge the Nvidia-Kernel, Nvidia-GLX drivers and i was set!!! NO PROBLEMS AT ALL!!!

except on little one!! when i exit x the computer just stops responding it wont give me any terminals and i do the 3keys of death nutting happens... it just stays there!!

can someone help me all i have is VESA compiled into the kernel...etc!
Back to top
View user's profile Send private message
kakakoka
Tux's lil' helper
Tux's lil' helper


Joined: 14 May 2003
Posts: 147
Location: Denmark

PostPosted: Sun Oct 12, 2003 10:27 pm    Post subject: Reply with quote

craftyc wrote:
Halanegri wrote:

You also forgot that you have to create the /sys directory manually.


What's that about? I never knew you had to do that.


I got the boot time message about /sys missing too until I emerged LVM2.

Im running LVM for 4 partitions (like in the gentoo LVM doc), and I had to emerge LVM2 before I could make LVM work with the 2.6.0 kernel. So:

Enable LVM in the kernel
emerge -c lvm-user (this will break your 2.4.x kernels I guess since you wont be able to mount your LVM partitions under your 2.4.x kernel anymore since LVM needs lvm-user in that environment)
emerge lvm2

Should get you running.
_________________
Aspiring to once become a great geek
---
"Tachikoma": AMD TB 1300 Mhz, ECS-K7S5A (SIS 735), (noname) RADEON 8500, Hercules Gametheater XP, Pinnacle PCTV pro
"Pyonpyon": Athlon 2500+ Barton, MSI K7N2-delta-ISLR (Nforce2), Sapphire Radeon 9600 Pro
Back to top
View user's profile Send private message
Baer
Tux's lil' helper
Tux's lil' helper


Joined: 11 Sep 2003
Posts: 96
Location: Munich, Germany

PostPosted: Fri Oct 17, 2003 11:38 am    Post subject: Reply with quote

Hi,

found this lil' text, covering most of my questions.

Regs
Baer
_________________
Life is like a roll of toilet paper, when the end is near we panic!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
Page 4 of 10

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum