Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Funtoo X problem [SOLVED]
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 10:07 am    Post subject: Funtoo X problem [SOLVED] Reply with quote

I have installed Funtoo on a HD, the system boots fine, I see the command prompt, I' m able to do "emerge --sync", I have installed xorg and Gnome, but when I typed "startx", I received this disappointing message:
Code:
(ΕΕ) Failed to load module "ati" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.

Fatal server error:
no screens found.


How can I correct it and have my Funtoo Gnome working? :(


Last edited by rpil on Fri Nov 20, 2009 11:10 pm; edited 1 time in total
Back to top
View user's profile Send private message
Veldrin
Veteran
Veteran


Joined: 27 Jul 2004
Posts: 1945
Location: Zurich, Switzerland

PostPosted: Fri Nov 20, 2009 10:19 am    Post subject: Reply with quote

emerge --info please.... (there is most likely an config error in your make.conf)

or as a quick 'n' dirty solution - install those missing drivers (xf86-video-ati, xf86-video-fbdev, xf86-vesa)

cheers
V.
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Fri Nov 20, 2009 2:55 pm    Post subject: Reply with quote

Can you post this too :

Code:

# cat /etc/X11/xorg.conf
# qlist -IC x11-drivers
# rc-update show
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 8:40 pm    Post subject: Reply with quote

Well, I'm chrooted from an gOS live cd:
Code:
Ubuntu / # emerge --info
Portage 2.2_rc50 (default/linux/x86/10.0/desktop, gcc-4.3.3, glibc-2.9_p20081201-r2, 2.6.22-14-generic i686)
=================================================================
System uname: Linux-2.6.22-14-generic-i686-AMD_Athlon-tm-_Processor-with-gentoo-2.1.6
Timestamp of tree: Tue, 17 Nov 2009 07:00:01 +0000
app-shells/bash:     4.0_p28
dev-lang/python:     2.6.2-r1
dev-util/cmake:      2.6.4-r3
sys-apps/baselayout: 2.1.6
sys-apps/openrc:     0.5.0-r2
sys-apps/sandbox:    2.2
sys-devel/autoconf:  2.13, 2.63-r1
sys-devel/automake:  1.9.6-r2, 1.10.2
sys-devel/binutils:  2.19.1-r1
sys-devel/gcc-config: 1.4.1
sys-devel/libtool:   2.2.6a
virtual/os-headers:  2.6.27-r2
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i486-pc-linux-gnu"
CFLAGS="-O2 -mtune=i686 -pipe"
CHOST="i486-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests distlocks fixpackages news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="en_US.UTF-8"
LC_ALL="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X a52 aac acl acpi alac alsa avahi berkdb bluetooth branding bzip2 cairo cdr cli consolekit cracklib crypt cups dbus dri dts dvd dvdr dvdread eds emboss encode evo fam firefox flac fortran gdbm gif gnome gpm gstreamer gtk hal iconv ipv6 jpeg kde lame ldap libnotify mad mdnsresponder-compat mikmod modules mp3 mp4 mpeg mudflap ncurses nls nptl nptlonly ogg opengl openmp pam pcre pdf perl png ppds pppd python qt3 qt3support qt4 quicktime readline reflection sdl session spell spl ssl startup-notification svg sysfs tcpd thunar tiff truetype unicode usb vorbis wavpack win32codecs x264 x86 xml xorg xscreensaver xulrunner xv xvid zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="fglrx"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 9:01 pm    Post subject: Reply with quote

Strange thing! There is no /etc/X11/xorg.conf but /etc/X11/xorg.conf.example !!!
Code:
Ubuntu / # cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
Ubuntu / # qlist -IC x11-drivers
x11-drivers/ati-drivers
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
Ubuntu / # rc-update show
                 fsck |                  boot       
            udev-save |         shutdown             
            syslog-ng | default               sysinit
            savecache |         shutdown             
              hwclock |                  boot       
                devfs |                       sysinit
                 dbus | default                     
                  xdm | default                     
               procfs |                  boot       
                 root |                  boot       
              keymaps |                  boot       
                 swap |                  boot       
                 mtab |                  boot       
           udev-mount |                       sysinit
                 hald | default                     
                local | default                     
            killprocs |         shutdown             
               sysctl |                  boot       
       udev-postmount |                  boot       
                dmesg |                       sysinit
              urandom |                  boot       
                udevd |                       sysinit
           localmount |                  boot       
           vixie-cron | default                     
             bootmisc |                  boot       
         termencoding |                  boot       
              modules |                  boot       
       avahi-dnsconfd | default                     
               dhcpcd | default                     
             netmount | default                     
             mount-ro |         shutdown             
             hostname |                  boot
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 9:05 pm    Post subject: Reply with quote

And this is /etc/X11/xorg.conf.example:
Code:
# $XdotOrg$
#
# Copyright (c) 1994-1998 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $

# **********************************************************************
# This is a sample configuration file only, intended to illustrate
# what a config file might look like. Refer to the XF86Config(4/5)
# man page for details about the format of this file. This man page
# is installed as MANPAGE
# **********************************************************************

# The ordering of sections is not important in version 4.0 and later.

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

# ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************

Section "Module"

# This loads the DBE extension module.

Load "dbe"

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection

# This loads the Type1 and FreeType font modules

Load "type1"
Load "freetype"

EndSection


# **********************************************************************
# Server flags section. This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

Option "blank time" "10" # 10 minutes

# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# Set the keyboard auto repeat parameters. Not all platforms implement
# this.

Option "AutoRepeat" "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"


# These are the default XKB settings for xorg
#
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"

# The mouse protocol and device. The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

Option "Protocol" "Microsoft"
Option "Device" "/dev/mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

# Option "Protocol" "Auto"

# When using mouse connected to a PS/2 port (aka "MousePort"), set the
# the protocol as follows. On some platforms some other settings may
# be available.

# Option "Protocol" "PS/2"

# Baudrate and SampleRate are only for some older Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice, or any
# 3-button mouse where the middle button generates left+right button
# events.

# Option "ChordMiddle"

EndSection

Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "MouseMan"
Option "Device" "/dev/mouse2"
EndSection

# Some examples of extended input devices

# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

# The identifier line must be present.

Identifier "Generic Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

# HorizSync 31.5 # typical for a single frequency fixed-sync monitor
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

# VertRefresh 60 # typical for a single frequency fixed-sync monitor

# VertRefresh 50-100 # multisync
# VertRefresh 60, 65 # multiple fixed sync frequencies
# VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies

# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.

# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
# These two are equivalent

# ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525

Mode "640x480"
DotClock 25.175
HTimings 640 664 760 800
VTimings 480 491 493 525
EndMode

# These two are equivalent

# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode

# If a monitor has DPMS support, that can be indicated here. This will
# enable DPMS when the monitor is used with drivers that support it.

# Option "dpms"

# If a monitor requires that the sync signals be superimposed on the
# green signal, the following option will enable this when used with
# drivers that support it. Only a relatively small range of hardware
# (and drivers) actually support this.

# Option "sync on green"

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"

# The Identifier must be present.

Identifier "Generic VGA"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# Various other lines can be specified to override the driver's automatic
# detection code. In most cases they are not needed.

# VideoRam 256
# Clocks 25.2 28.3

# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# Various option lines can be added here as required. Some options
# are more appropriate in Screen sections, Display subsections or even
# Monitor sections.

# Option "hw cursor" "off"

EndSection

Section "Device"
Identifier "any supported Trident chip"
Driver "trident"
EndSection

Section "Device"
Identifier "MGA Millennium I"
Driver "mga"
Option "hw cursor" "off"
BusID "PCI:0:10:0"
EndSection

Section "Device"
Identifier "MGA G200 AGP"
Driver "mga"
BusID "PCI:1:0:0"
Option "pci retry"
EndSection


# **********************************************************************
# Screen sections.
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.

Section "Screen"

# The Identifier, Device and Monitor lines must be present

Identifier "Screen 1"
Device "Generic VGA"
Monitor "Generic Monitor"

# The favoured Depth and/or Bpp may be specified here

DefaultDepth 8

SubSection "Display"
Depth 8
Modes "640x480"
ViewPort 0 0
Virtual 800 600
EndSubsection

SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection

SubSection "Display"
Depth 1
Modes "640x480"
EndSubSection

EndSection


Section "Screen"
Identifier "Screen MGA1"
Device "MGA Millennium I"
Monitor "Generic Monitor"
Option "no accel"
DefaultDepth 16
# DefaultDepth 24

SubSection "Display"
Depth 8
Modes "1280x1024"
Option "rgb bits" "8"
Visual "StaticColor"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection


Section "Screen"
Identifier "Screen MGA2"
Device "MGA G200 AGP"
Monitor "Generic Monitor"
DefaultDepth 8

SubSection "Display"
Depth 8
Modes "1280x1024"
Option "rgb bits" "8"
Visual "StaticColor"
EndSubSection
EndSection


# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present

Identifier "Main Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen MGA 1" "" "" "" "Screen MGA 2"
Screen "Screen MGA 2" "" "" "Screen MGA 1" ""

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents". In this example, "Mouse1" is the core pointer,
# and "Mouse2" is an extended input device that also generates core
# pointer events (i.e., both mice will move the standard pointer).

InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection


Section "ServerLayout"
Identifier "another layout"
Screen "Screen 1"
Screen "Screen MGA 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection


Section "ServerLayout"
Identifier "simple layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 9:08 pm    Post subject: Reply with quote

And my /var/log/Xorg.0.log:
Code:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-gentoo-r8 i686
Current Operating System: Linux drphibes 2.6.30-gentoo-r8 #1 SMP PREEMPT Fri Nov 6 13:01:32 EET 2009 i686
Build Date: 18 November 2009 09:47:16PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 18 22:37:15 2009
(II) Loader magic: 0x3aa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:5046:1002:0018 ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS rev 0, Mem @ 0xe0000000/67108864, 0xdf000000/16384, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(WW) Warning, couldn't open module ati
(II) UnloadModule: "ati"
(EE) Failed to load module "ati" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43546
Location: 56N 3W

PostPosted: Fri Nov 20, 2009 9:32 pm    Post subject: Reply with quote

rpil,
Code:
(ΕΕ) Failed to load module "ati" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
those drivers are not listed in your VIDEO_CARDS= in make.conf so they have not been built.

Add them to your VIDEO_CARDS= and do
Code:
emerge -1 xf86-video-vesa xf86-video-fbdev  xf86-video-ati
to install them without rebuilding all of Xorg
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 9:35 pm    Post subject: Reply with quote

Neddy, I already have installed these drivers!
I gave
Code:
emerge xf86-video-vesa
emerge xf86-video-fbdev
emerge xf86-video-ati


and now, the result of qlist -IC x11-drivers, is:

Code:
Ubuntu / # qlist -IC x11-drivers
x11-drivers/ati-drivers
x11-drivers/xf86-input-keyboard
x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati
x11-drivers/xf86-video-fbdev
x11-drivers/xf86-video-vesa


Do you think, It's OK now?
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43546
Location: 56N 3W

PostPosted: Fri Nov 20, 2009 9:42 pm    Post subject: Reply with quote

rpil,

Well, you should get a different error now :)
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 9:44 pm    Post subject: Reply with quote

What error???? 8O :?
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 9:55 pm    Post subject: Reply with quote

Well, I restarted the machine and I received an "OUT OF RANGE 46,4KHz / 87Hz" black screen!!!
What to do, now??? :cry: :cry:
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Fri Nov 20, 2009 10:18 pm    Post subject: Reply with quote

Hi, edit your /etc/make.conf an modify this :

Code:

INPUT_DEVICES="keyboard mouse"


to

Code:

INPUT_DEVICES="evdev keyboard mouse"


And then, run this plz :

Code:

# emerge -auDNv world
# revdep-rebuild -i


Reboot your box and post the result.
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 10:28 pm    Post subject: Reply with quote

One question. In VIDEO_CARDS I have "fglrx vesa ati fbdev". Do I must change something in there?
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Fri Nov 20, 2009 11:09 pm    Post subject: Reply with quote

Yes!!! :D
All went fine!

@ d2_racing
I followed your instructions, I rebooted the box, and I saw the "Out of Range" screen message.
I changed screen, and then I saw the login window of Funtoo, waiting for me!!!
Thank you very much!

But, I would like to use my LCD screen, how can I solve this problem? My screen is LG-Flatron L1750SQ.
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Sat Nov 21, 2009 1:51 am    Post subject: Reply with quote

Hi, you need to use this one :

Code:

"fglrx vesa"
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Sat Nov 21, 2009 1:52 am    Post subject: Reply with quote

And you should try this little /etc/X11/xorg.conf

Code:

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "fglrx"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection


Reboot your box and post the result :P
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Sat Nov 21, 2009 2:29 am    Post subject: Reply with quote

d2_racing wrote:
And you should try this little /etc/X11/xorg.conf


There is no xorg.conf, only xorg.conf.example! Strange. I posted it, earlier, you can see it.
The system works fine now, but I've changed the VIDEO_CARDS settings as you told me to do.
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Sat Nov 21, 2009 2:48 am    Post subject: Reply with quote

Then you can create a /etc/X11/xorg.conf then :P

Code:

# nano /etc/X11/xorg.conf


And paste that code :

Code:

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "fglrx"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Sat Nov 21, 2009 9:22 am    Post subject: Reply with quote

OK, i did it! The xorg.conf file is up! :)

Another strange thing: I wanted to change the place o f a boot option (genkernel is the 3rd choise in boot screen) and i typed
nano /boot/grub/menu.lst
I saw an empty file!!! I looked by the graphical way, and the file "boot" is completely empty! Is it possible that it cannot see the /boot partition?
Where are the boot files? :?
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43546
Location: 56N 3W

PostPosted: Sat Nov 21, 2009 12:24 pm    Post subject: Reply with quote

rpil,

In gentoo, /boot is not mounted at boot time. You have to mount it manually when you want to install a kernel.
Look in /etc/fstab against the line for /boot, it probably has the noauto option set.

Run the command
Code:
mount /boot
whenever you want to work on your boot, or remove the noauto option from /etc/fstab
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Sat Nov 21, 2009 3:59 pm    Post subject: Reply with quote

Can you post this :

Code:

# cat /boot/grub/grub.conf
Back to top
View user's profile Send private message
rpil
Guru
Guru


Joined: 23 May 2008
Posts: 314

PostPosted: Sat Nov 21, 2009 8:13 pm    Post subject: Reply with quote

Thank you, guys for your precious informations. As an Ubuntu Ultimate user for about 4 years, I need to learn enough about my beloved Gentoo!

These are the results of the two commands:
Code:

drphibes drphibes # cat /boot/grub/grub.conf
cat: /boot/grub/grub.conf: No such file or directory
drphibes drphibes # mount /boot
mount: special device /dev/sda1 does not exist

As it seems, it doesn't see the /boot partition.
But it boots very fast and nice.

@ d2_racing: The creation of the xorg.conf file was not a very good idea, after all! When I rebooted, I saw the "No screens found" message. I removed the file and it returned to normal boot. :wink:
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43546
Location: 56N 3W

PostPosted: Sat Nov 21, 2009 9:04 pm    Post subject: Reply with quote

rpil,

If your /boot is empty but your system boots, I would interpret your
Code:
drphibes # mount /boot
mount: special device /dev/sda1 does not exist
as meaning that /etc/fstab is incorrect.

You must have a boot partition if /boot is empty
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Sun Nov 22, 2009 1:48 am    Post subject: Reply with quote

Ok, after a reboot, can you post this :

Code:

# cat /etc/fstab
# mount
# fdisk -l
# cd /boot && ls -la
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum