Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
gpsd und GARMIN oregon 300
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
mattes
Apprentice
Apprentice


Joined: 23 Jul 2008
Posts: 255
Location: München, Bavaria, Germany

PostPosted: Wed Dec 23, 2009 11:25 am    Post subject: gpsd und GARMIN oregon 300 Reply with quote

Hallo,

versuche vergeblich gpsd mit meinem Garmin Orgeon 300 zu betrieben.

Scheint auch soweit zu funktionieren (der Verbindungsaufbau) aber es kommen wohl vom GPS keine Daten:

Code:
gpsd /dev/ttyUSB0 -N -D 9
gpsd: launching (Version 2.39)             
gpsd: listening on port 2947               
gpsd: successfully connected to the DBUS system bus
gpsd: running with effective group ID 0           
gpsd: running with effective user ID 0             
gpsd: opening GPS data source at '/dev/ttyUSB0'   
gpsd: speed 9600, 8N1                             
gpsd: => GPS: 2450415348512c5249442a32380d0a       
gpsd: Navcom: command dump: 0299661c0800040200001203
gpsd: => GPS: 0299661c0800040200001203             
gpsd: Navcom: sent command 0x1c (Test Support Block)
gpsd: Navcom: command 0x1c mode = 02, length = 0   
gpsd: Navcom: command dump: 029966200e000001ae02000071000000f203
gpsd: => GPS: 029966200e000001ae02000071000000f203             
gpsd: Navcom: sent command 0x20 (Data Request) - data block id = ae at rate 00
gpsd: Navcom: command dump: 029966200e00000186020a0071000000d003             
gpsd: => GPS: 029966200e00000186020a0071000000d003                           
gpsd: Navcom: sent command 0x20 (Data Request) - data block id = 86 at rate 0a
gpsd: writing superstar2 control type 3f len 14:013fc008554750532d3030300402 
gpsd: => GPS: 013fc008554750532d3030300402                                   
gpsd: writing superstar2 control type 2d len 6:012dd2000000                   
gpsd: => GPS: 012dd2000000                                                   
gpsd: Set garmin_gps driver mode = 0                                         
gpsd: PrintUSBPacket()                                                       
gpsd: Private, Set Mode: 1                                                   
gpsd: => GPS: 4b6e1001020000000400000001000000                               
gpsd: SendPacket(), wrote 16 bytes                                           
gpsd: probe found Garmin USB binary driver...                                 
gpsd: gpsd_activate(1): opened GPS (5)                                       
gpsd: Get Garmin Product Data                                                 
gpsd: SendPacket(), writing 6 bytes: 10fe00021003                             
gpsd: PrintSERPacket(, 0xfe, 00, )                                           
gpsd: Appl, Product Data req                                                 
gpsd: PrintSERPacket(, 0xfe, 00, ) = 00                                       
gpsd: => GPS: 10fe00021003                                                   
gpsd: SendPacket(), wrote 6 bytes                                             
gpsd: Set Garmin to send reports every 1 second                               
gpsd: SendPacket(), writing 8 bytes: 100a023100c31003                         
gpsd: PrintSERPacket(, 0xa, 0x2, )                                           
gpsd: Appl, Command Data: Start Xmit PVT data                                 
gpsd: PrintSERPacket(, 0xa, 0x2, ) = 00                                       
gpsd: => GPS: 100a023100c31003                                               
gpsd: SendPacket(), wrote 8 bytes                                             
gpsd: select waits                                                           
gpsd: polling 5                                                               
gpsd: Read 16 chars to buffer offset 0 (total 16): 100602fe00fa10031006020a00ee1003
gpsd: 00000000: character '.' [10], new state: DLE_LEADER                         
gpsd: 00000001: character '.' [06], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 15 chars = 0602fe00fa10031006020a00ee1003       
gpsd: ISGPS word tag not correct, skipping byte                                   
gpsd: 00000002: character '.' [06], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 14 chars = 02fe00fa10031006020a00ee1003         
gpsd: 00000003: character '.' [02], new state: NAVCOM_LEADER_1                     
gpsd: 00000004: character '.' [fe], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 13 chars = fe00fa10031006020a00ee1003           
gpsd: ISGPS word tag not correct, skipping byte                                   
gpsd: 00000005: character '.' [fe], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 12 chars = 00fa10031006020a00ee1003             
gpsd: ISGPS word tag not correct, skipping byte                                   
gpsd: 00000006: character '.' [00], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 11 chars = fa10031006020a00ee1003               
gpsd: ISGPS word tag not correct, skipping byte                                   
gpsd: 00000007: character '.' [fa], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 10 chars = 10031006020a00ee1003                 
gpsd: 00000008: character '.' [10], new state: DLE_LEADER                         
gpsd: 00000009: character '.' [03], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 9 chars = 031006020a00ee1003                     
gpsd: ISGPS word tag not correct, skipping byte                                   
gpsd: 00000010: character '.' [03], new state: GROUND_STATE                       
gpsd: Character discarded, buffer 8 chars = 1006020a00ee1003
gpsd: 00000011: character '.' [10], new state: DLE_LEADER
gpsd: 00000012: character '.' [06], new state: GROUND_STATE
gpsd: Character discarded, buffer 7 chars = 06020a00ee1003
gpsd: ISGPS word tag not correct, skipping byte
gpsd: 00000013: character '.' [06], new state: GROUND_STATE
gpsd: Character discarded, buffer 6 chars = 020a00ee1003
gpsd: 00000014: character '.' [02], new state: NAVCOM_LEADER_1
gpsd: 00000015: character '.' [0a], new state: GROUND_STATE
gpsd: Character discarded, buffer 5 chars = 0a00ee1003
gpsd: ISGPS word tag not correct, skipping byte
gpsd: 00000016: character '.' [0a], new state: GROUND_STATE
gpsd: Character discarded, buffer 4 chars = 00ee1003
gpsd: ISGPS word tag not correct, skipping byte
gpsd: 00000017: character '.' [00], new state: GROUND_STATE
gpsd: Character discarded, buffer 3 chars = ee1003
gpsd: ISGPS word tag not correct, skipping byte
gpsd: 00000018: character '.' [ee], new state: GROUND_STATE
gpsd: Character discarded, buffer 2 chars = 1003
gpsd: 00000019: character '.' [10], new state: DLE_LEADER
gpsd: 00000020: character '.' [03], new state: GROUND_STATE
gpsd: Character discarded, buffer 1 chars = 03
gpsd: ISGPS word tag not correct, skipping byte
gpsd: 00000021: character '.' [03], new state: GROUND_STATE
gpsd: Character discarded, buffer 0 chars =
gpsd: GPS sent 16 new characters
gpsd: New data on /dev/ttyUSB0, not yet a packet
gpsd: select waits
gpsd: select waits
gpsd: select waits
gpsd: select waits
^C
gpsd: Received terminating signal 2. Exiting...
gpsd: garmin_close()
gpsd: closing GPS=/dev/ttyUSB0 (5)


habe schon verschiedene Einstellungen am GPS probiert, aber nur mit "Garmin Spanner" komme ich überhaupt so weit.

Kennt sich von euch Jemand damit aus?

EDIT:
verwendetes gpsd:
[I] sci-geosciences/gpsd
Installed versions: 2.39(16:43:31 22.12.2009)(X dbus usb garmin -minimal -ntp -ocean -tntc)

Garmin FW:3.22 Beta, GPS-FW: 3.70

Viele grüße
Mattes
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum