Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
defekte Platte?
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
69719
l33t
l33t


Joined: 20 Sep 2004
Posts: 865

PostPosted: Tue Mar 02, 2010 6:31 am    Post subject: defekte Platte? Reply with quote

Servus,

irgendwie hat die Platte in meinem neuen Laptop bereits nach kürzester Zeit defekte Sektoren. Ich kann die Sektoren wie unten aufgelistet nicht mehr lesen, allerdings ist der Wert Raw_Read_Error_Rate bei smartctl -a /dev/sda auf 0, dafür werden andere Fehler angezeigt. Nur leider werde ich daraus nicht schlau, vielleicht habt ihr ja ein paar Informationen für mich.

Code:

smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD3200BEVT-22ZCT0
Serial Number:    WD-WX30E6980203
Firmware Version: 11.01A11
User Capacity:    320.072.933.376 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar  2 06:43:16 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:        (9600) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 113) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x303f)   SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   191   186   021    Pre-fail  Always       -       1425
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       137
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       260
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       134
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       67
193 Load_Cycle_Count        0x0032   197   197   000    Old_age   Always       -       10160
194 Temperature_Celsius     0x0022   110   091   000    Old_age   Always       -       37
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 42 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 42 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1b 22 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:55.261  READ FPDMA QUEUED
  27 00 00 00 00 00 00 08      00:54:55.261  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:55.257  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:54:55.257  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:55.257  READ NATIVE MAX ADDRESS EXT

Error 41 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1b 22 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:52.109  READ FPDMA QUEUED
  27 00 00 00 00 00 00 08      00:54:52.109  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:52.106  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:54:52.106  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:52.106  READ NATIVE MAX ADDRESS EXT

Error 40 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1b 22 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:48.961  READ FPDMA QUEUED
  27 00 00 00 00 00 00 08      00:54:48.961  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:48.957  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:54:48.957  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:48.951  READ NATIVE MAX ADDRESS EXT

Error 39 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1b 22 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:45.668  READ FPDMA QUEUED
  27 00 00 00 00 00 00 08      00:54:45.668  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:45.666  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:54:45.664  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:45.664  READ NATIVE MAX ADDRESS EXT

Error 38 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1b 22 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:42.234  READ FPDMA QUEUED
  27 00 00 00 00 00 00 08      00:54:42.232  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:42.230  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:54:42.230  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:42.230  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Folgende Sektoren wurden mittels badblocks erkannt.
Code:

159387904
159387916
159387917
159387918
159387919
159387920
159387921
159387922
159387923
159387924
159387925
159387926
159387927
159387928
159387929
159387930
159387931
159387932
159387933
159387934
159387935
159387936
159387937
159387938
159387939
159387940
159387941
159387942
159387943
159387944
159387945
159387946
159387947
159387948
159387949
159387950
159387951
159387952
159387953
159387954
159387955
159387956
159387957
159387958
159387959
159387960
159387961
159387962
159387963
159387964
159387965
159387966
159387967
159387968
159387969
159387970
159387971
159387972
159387973
159387974
159387975
159387976
159387977
159387978
159387979
159387980
159387981
159387982
159387983
159387984
159387985
159387986
159387987
159387988
159387989
159387990
159387991
159387992
159387993
159387994
159387995
159387996
159387997
159387998
159387999
159388000
159388001
159388002
159388003
159388004
159388005
159388006
159388007
159388008
159388009
159388010
159388011
159388012
159388013
159388014
159388015
159388016
159388017
159388018
159388019
159388020
159388021
159388022
159388023
159388024
159388025
159388026
159388027
159388028
159388029
159388030
159388031
159388032
159388033
159388034
159388035
Back to top
View user's profile Send private message
JoHo42
l33t
l33t


Joined: 14 Feb 2004
Posts: 944
Location: Germany

PostPosted: Tue Mar 02, 2010 6:49 am    Post subject: Reply with quote

Hi,

hier steht was:
Quote:

Device is: Not in smartctl database [for details use: -P showall]


Daher weiss ich nicht, in wie weit man sich auf die ganze Ausgabe verlassen kann.
Ich weiss nicht, ob smartctl alle Daten richtig aussliehst.
Eigentlich wollte ich mir das Programm mal so einrichten, das man damit auch was anfangen kann.
Also das man eine Email bekommt, wenn die Platten schrot gehen.
Ich habe allerdings selber keine Festplatte die von diesem Programm unterstuetzt wird.
Mit jeder Platte bekomme ich auch die Meldung wie oben.

Gruss Joerg
Back to top
View user's profile Send private message
69719
l33t
l33t


Joined: 20 Sep 2004
Posts: 865

PostPosted: Tue Mar 02, 2010 7:08 am    Post subject: Reply with quote

Mit den smartmontools version 5.39 scheint sie gelistet zu sein.
Code:

MODEL REGEXP:       WDC WD((4|6|8|10|12|16|25)00BEVS|(8|12|16|25|32|40|50)00BEVT)-.*
FIRMWARE REGEXP:    .*
MODEL FAMILY:       Western Digital Scorpio Blue Serial ATA family
ATTRIBUTE OPTIONS:  None preset; no -v options are required.

allerdings denke ich, dass es nichts an den Werten ändern wird.
Back to top
View user's profile Send private message
STiGMaTa_ch
Veteran
Veteran


Joined: 28 Dec 2004
Posts: 1686
Location: Rüti ZH / Schweiz

PostPosted: Tue Mar 02, 2010 8:41 am    Post subject: Reply with quote

Um wirklich sicherzustellen ob die Disk einen Schaden hat oder ob du mit irgendwas anderem zu kämpfen hast, würde ich IMMER die Diagnosetools der Festplattenhersteller verwenden.

Data Lifeguard Diagnostic für DOS (CD/Floppy Images)

Lieber Gruss
STiGMaTa
_________________
Ich bin Schuldknappe. Das bedeutet ich bin immer an allem Schuld. Und das nicht zu knapp! | Der alltägliche Familienwahnsinn auf meinem BLOG
Back to top
View user's profile Send private message
69719
l33t
l33t


Joined: 20 Sep 2004
Posts: 865

PostPosted: Tue Mar 02, 2010 7:54 pm    Post subject: Reply with quote

Also das Data Lifeguard Diagnostic Programm kann man in die Tonne treten. Mal Läuft der quicktest (max. 2 Minuten) ohne Fehler durch, mal meldet der quicktest einen Fehler und mal muss ich nach einer halben Stunde den quicktest abbrechen. Der long Test meldet auch, dass alles in ordnung ist. Mit den smartmontools hab ich jetzt mal die Test's angeschups und er meldet folgendes.
Code:

martctl 5.39 2009-12-09 r2995 [x86_64-pc-linux-gnu] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by host               10%       263         -
# 2  Short offline       Completed: read failure       90%       261         318775835
# 3  Short offline       Completed: read failure       90%       261         318775835
# 4  Short offline       Completed: read failure       90%       261         318775835
# 5  Extended offline    Completed: read failure       90%       261         318775835
# 6  Short offline       Completed: read failure       90%       261         318775835


Demnach hat die Platte definitiv einen Defekt. Was mich allerdings wundert, dass immernoch keine Werte bei RAW_READ_ERROR_RATE und anderen dasteht. Jedenfalls ist mir das jetzt egal. Wenn die Festplatte selber meldet, dass der Test fehl schlägt und ich bestimmte Sektoren nicht lesen kann, dann geht das ding halt in die Reparatur. Da soll sich Western Digital drum kümmern, schließlich ist dies ja der Fabrikant.
Code:

smartctl 5.39 2009-12-09 r2995 [x86_64-pc-linux-gnu] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA family
Device Model:     WDC WD3200BEVT-22ZCT0                         
Serial Number:    WD-WX30E6980203                               
Firmware Version: 11.01A11                                     
User Capacity:    320.072.933.376 bytes                         
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8                                             
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Mar  2 20:48:24 2010 CET                       
SMART support is: Available - device has SMART capability.           
SMART support is: Enabled                                           

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x04) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Disabled.           
Self-test execution status:      (   0) The previous self-test routine completed           
                                        without error or no self-test has ever             
                                        been run.                                         
Total time to complete Offline                                                             
data collection:                 (9600) seconds.                                           
Offline data collection                                                                   
capabilities:                    (0x7b) SMART execute Offline immediate.                   
                                        Auto Offline data collection on/off support.       
                                        Suspend Offline collection upon new               
                                        command.                                           
                                        Offline surface scan supported.                   
                                        Self-test supported.                               
                                        Conveyance Self-test supported.                   
                                        Selective Self-test supported.                     
SMART capabilities:            (0x0003) Saves SMART data before entering                   
                                        power-saving mode.                                 
                                        Supports SMART auto save timer.                   
Error logging capability:        (0x01) Error logging supported.                           
                                        General Purpose Logging supported.                 
Short self-test routine                                                                   
recommended polling time:        (   2) minutes.                                           
Extended self-test routine                                                                 
recommended polling time:        ( 113) minutes.                                           
Conveyance self-test routine                                                               
recommended polling time:        (   5) minutes.                                           
SCT capabilities:              (0x303f) SCT Status supported.                             
                                        SCT Feature Control supported.                     
                                        SCT Data Table supported.                         

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds: 
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0       
  3 Spin_Up_Time            0x0027   189   186   021    Pre-fail  Always       -       1541     
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       142     
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0       
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0       
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       263     
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0       
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0       
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       139     
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       69       
193 Load_Cycle_Count        0x0032   197   197   000    Old_age   Always       -       10183   
194 Temperature_Celsius     0x0022   101   091   000    Old_age   Always       -       46       
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0       
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       1       
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0       
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0       
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0       

SMART Error Log Version: 1
ATA Error Count: 42 (device log contains only the most recent five errors)
        CR = Command Register [HEX]                                       
        FR = Features Register [HEX]                                     
        SC = Sector Count Register [HEX]                                 
        SN = Sector Number Register [HEX]                                 
        CL = Cylinder Low Register [HEX]                                 
        CH = Cylinder High Register [HEX]                                 
        DH = Device/Head Register [HEX]                                   
        DC = Device Command Register [HEX]                               
        ER = Error register [HEX]                                         
        ST = Status register [HEX]                                       
Powered_Up_Time is measured from power on, and printed as                 
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,                     
SS=sec, and sss=millisec. It "wraps" after 49.710 days.                   

Error 42 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH                             
  -- -- -- -- -- -- --                             
  40 51 00 1b 22 00 40                             

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:55.261  READ FPDMA QUEUED   
  27 00 00 00 00 00 00 08      00:54:55.261  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:55.257  IDENTIFY DEVICE           
  ef 03 46 00 00 00 00 08      00:54:55.257  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:55.257  READ NATIVE MAX ADDRESS EXT     

Error 41 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH                             
  -- -- -- -- -- -- --                             
  40 51 00 1b 22 00 40                             

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:52.109  READ FPDMA QUEUED   
  27 00 00 00 00 00 00 08      00:54:52.109  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:52.106  IDENTIFY DEVICE           
  ef 03 46 00 00 00 00 08      00:54:52.106  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:52.106  READ NATIVE MAX ADDRESS EXT     

Error 40 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH                             
  -- -- -- -- -- -- --                             
  40 51 00 1b 22 00 40                             

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:48.961  READ FPDMA QUEUED   
  27 00 00 00 00 00 00 08      00:54:48.961  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:48.957  IDENTIFY DEVICE           
  ef 03 46 00 00 00 00 08      00:54:48.957  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:48.951  READ NATIVE MAX ADDRESS EXT     

Error 39 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1b 22 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:45.668  READ FPDMA QUEUED
  27 00 00 00 00 00 00 08      00:54:45.668  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:45.666  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:54:45.664  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:45.664  READ NATIVE MAX ADDRESS EXT

Error 38 occurred at disk power-on lifetime: 254 hours (10 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 1b 22 00 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 18 22 00 13 08      00:54:42.234  READ FPDMA QUEUED
  27 00 00 00 00 00 00 08      00:54:42.232  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 08      00:54:42.230  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 08      00:54:42.230  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 08      00:54:42.230  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by host               10%       263         -
# 2  Short offline       Completed: read failure       90%       261         318775835
# 3  Short offline       Completed: read failure       90%       261         318775835
# 4  Short offline       Completed: read failure       90%       261         318775835
# 5  Extended offline    Completed: read failure       90%       261         318775835
# 6  Short offline       Completed: read failure       90%       261         318775835

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum