Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Drucken über Netzwerk extrem langsam.
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
roha
n00b
n00b


Joined: 01 Sep 2002
Posts: 31

PostPosted: Sun Mar 07, 2010 4:49 pm    Post subject: Drucken über Netzwerk extrem langsam. Reply with quote

Hallo, ich musste mir nachdem meine Fritzbox 3070Wlan Defekt ist einen neuen
WLAN-Router besorgen. Da der neue Router ein Speedport 701V keinen eingebauten
USB Printport hat hatte ich mir einen Ethernet auf USB Printserver von LogiLink den PS0002 dazu gekauft, die Ausdrucke auf dem angeschlossenen Canon IP4600 waren unter Gentoo 64Bit extrem langsam unter Win7 64Bit aber normal schnell, mit den gleichen Netzwerk und Drucker Einstellungen, als Treiber habe ich den Gutenprint und den Turboprint2 Treiber ausprobiert was keinen unterschied in der Druckgeschwindigkeit machte. Der Printersever unterstützt
IPP, Raw, LPR, AppleTalk, NetWare ,SMB ,SNMP ,NetBEUI Printing.
Direkt am USB Port des Rechners ist die Druckgeschwindigkeit unter Gentoo normal. Der Router hat die Ip xxx.xxx.2.1 der Printserver hat die IP xxx.xxx.2.2 Rechner 1 hat die IP xxx.xxx.2.19 Rechner 2 hat die IP xxx.xxx.2.20 mit der Fritzbox 3070Wlan gab es dieses Problem nicht.
ich habe IPP, LPD und Socket mit Port 9100 versucht. Auf einem in einer anderen
Festplatte Installierten 32Bit Suse 11.2 ist der Netzwerkdruck genauso langsam.
Wäre für Tipps sehr Dankbar.

MfG Robert


Last edited by roha on Tue Mar 09, 2010 4:57 pm; edited 1 time in total
Back to top
View user's profile Send private message
Hollowman
Guru
Guru


Joined: 19 Apr 2007
Posts: 584

PostPosted: Mon Mar 08, 2010 11:30 am    Post subject: Reply with quote

Hi

Wie sprichst du den Printserver an? RAW???

Sebastian
Back to top
View user's profile Send private message
roha
n00b
n00b


Joined: 01 Sep 2002
Posts: 31

PostPosted: Mon Mar 08, 2010 3:44 pm    Post subject: Reply with quote

Hallo, ich habe IPP, LPD und Socket mit Port 9100 versucht.
Ist Socket RAW ?, der Druck ist bei allen obigen Arten extrem langsam.
MfG Robert
Back to top
View user's profile Send private message
roha
n00b
n00b


Joined: 01 Sep 2002
Posts: 31

PostPosted: Wed Mar 10, 2010 2:35 pm    Post subject: Reply with quote

Ich habe mir mal Wireshark installiert und einen Druck mitgeschnitten,
leider sagt mir die Ausgabe nichts, folgend ein kleiner Auszug aus dem log.
Vielleicht erkennt Ihr darin ja das Problem.

No. Time Source Destination Protocol Info
79 63.855840 192.168.2.20 192.168.2.2 LPD LPR: transfer a printer job / jobcmd: receive control file

Frame 79 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: EdimaxTe_aa:77:f2 (00:0e:2e:aa:77:f2), Dst: EdimaxCo_d2:fc:81 (00:00:b4:d2:fc:81)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.2 (192.168.2.2)
Transmission Control Protocol, Src Port: 1023 (1023), Dst Port: printer (515), Seq: 1, Ack: 1, Len: 6
Source port: 1023 (1023)
Destination port: printer (515)
[Stream index: 2]
Sequence number: 1 (relative sequence number)
[Next sequence number: 7 (relative sequence number)]
Acknowledgement number: 1 (relative ack number)
Header length: 20 bytes
Flags: 0x18 (PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgement: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 5840
Checksum: 0x38b3 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
[SEQ/ACK analysis]
[Number of bytes in flight: 6]
Line Printer Daemon Protocol
LPR: transfer a printer job / jobcmd: receive control file
Printer/options: lpt1

No. Time Source Destination Protocol Info
80 64.107444 192.168.2.2 192.168.2.20 LPD LPD response

Frame 80 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: EdimaxCo_d2:fc:81 (00:00:b4:d2:fc:81), Dst: EdimaxTe_aa:77:f2 (00:0e:2e:aa:77:f2)
Internet Protocol, Src: 192.168.2.2 (192.168.2.2), Dst: 192.168.2.20 (192.168.2.20)
Transmission Control Protocol, Src Port: printer (515), Dst Port: 1023 (1023), Seq: 1, Ack: 7, Len: 1
Source port: printer (515)
Destination port: 1023 (1023)
[Stream index: 2]
Sequence number: 1 (relative sequence number)
[Next sequence number: 2 (relative sequence number)]
Acknowledgement number: 7 (relative ack number)
Header length: 20 bytes
Flags: 0x18 (PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgement: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 1024
Checksum: 0xef6c [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
[SEQ/ACK analysis]
[This is an ACK to the segment in frame: 79]
[The RTT to ACK the segment was: 0.251604000 seconds]
[Number of bytes in flight: 1]
Line Printer Daemon Protocol
Response: Success: accepted, proceed

No. Time Source Destination Protocol Info
81 64.107471 192.168.2.20 192.168.2.2 TCP 1023 > printer [ACK] Seq=7 Ack=2 Win=5840 Len=0

Frame 81 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: EdimaxTe_aa:77:f2 (00:0e:2e:aa:77:f2), Dst: EdimaxCo_d2:fc:81 (00:00:b4:d2:fc:81)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.2 (192.168.2.2)
Transmission Control Protocol, Src Port: 1023 (1023), Dst Port: printer (515), Seq: 7, Ack: 2, Len: 0
Source port: 1023 (1023)
Destination port: printer (515)
[Stream index: 2]
Sequence number: 7 (relative sequence number)
Acknowledgement number: 2 (relative ack number)
Header length: 20 bytes
Flags: 0x10 (ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgement: Set
.... 0... = Push: Not set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 5840
Checksum: 0xdca4 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
[SEQ/ACK analysis]
[This is an ACK to the segment in frame: 80]
[The RTT to ACK the segment was: 0.000027000 seconds]

No. Time Source Destination Protocol Info
82 64.107540 192.168.2.20 192.168.2.2 LPD LPR: transfer a printer job / jobcmd: receive control file

Frame 82 (76 bytes on wire, 76 bytes captured)
Ethernet II, Src: EdimaxTe_aa:77:f2 (00:0e:2e:aa:77:f2), Dst: EdimaxCo_d2:fc:81 (00:00:b4:d2:fc:81)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.2 (192.168.2.2)
Transmission Control Protocol, Src Port: 1023 (1023), Dst Port: printer (515), Seq: 7, Ack: 2, Len: 22
Source port: 1023 (1023)
Destination port: printer (515)
[Stream index: 2]
Sequence number: 7 (relative sequence number)
[Next sequence number: 29 (relative sequence number)]
Acknowledgement number: 2 (relative ack number)
Header length: 20 bytes
Flags: 0x18 (PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgement: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 5840
Checksum: 0x3573 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
[SEQ/ACK analysis]
[Number of bytes in flight: 22]
Line Printer Daemon Protocol
LPR: transfer a printer job / jobcmd: receive control file
Printer/options: 99 cfA982linux.local

No. Time Source Destination Protocol Info
83 64.117446 192.168.2.2 192.168.2.20 LPD LPD response

Frame 83 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: EdimaxCo_d2:fc:81 (00:00:b4:d2:fc:81), Dst: EdimaxTe_aa:77:f2 (00:0e:2e:aa:77:f2)
Internet Protocol, Src: 192.168.2.2 (192.168.2.2), Dst: 192.168.2.20 (192.168.2.20)
Transmission Control Protocol, Src Port: printer (515), Dst Port: 1023 (1023), Seq: 2, Ack: 29, Len: 1
Source port: printer (515)
Destination port: 1023 (1023)
[Stream index: 2]
Sequence number: 2 (relative sequence number)
[Next sequence number: 3 (relative sequence number)]
Acknowledgement number: 29 (relative ack number)
Header length: 20 bytes
Flags: 0x18 (PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgement: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 1024
Checksum: 0xef55 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
[SEQ/ACK analysis]
[This is an ACK to the segment in frame: 82]
[The RTT to ACK the segment was: 0.009906000 seconds]
[Number of bytes in flight: 1]
Line Printer Daemon Protocol
Response: Success: accepted, proceed

No. Time Source Destination Protocol Info
84 64.117545 192.168.2.20 192.168.2.2 LPD LPD continuation

Frame 84 (154 bytes on wire, 154 bytes captured)
Ethernet II, Src: EdimaxTe_aa:77:f2 (00:0e:2e:aa:77:f2), Dst: EdimaxCo_d2:fc:81 (00:00:b4:d2:fc:81)
Internet Protocol, Src: 192.168.2.20 (192.168.2.20), Dst: 192.168.2.2 (192.168.2.2)
Transmission Control Protocol, Src Port: 1023 (1023), Dst Port: printer (515), Seq: 29, Ack: 3, Len: 100
Source port: 1023 (1023)
Destination port: printer (515)
[Stream index: 2]
Sequence number: 29 (relative sequence number)
[Next sequence number: 129 (relative sequence number)]
Acknowledgement number: 3 (relative ack number)
Header length: 20 bytes
Flags: 0x18 (PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgement: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 5840
Checksum: 0x5610 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
[SEQ/ACK analysis]
[This is an ACK to the segment in frame: 83]
[The RTT to ACK the segment was: 0.000099000 seconds]
[Number of bytes in flight: 100]
Line Printer Daemon Protocol
Data (100 bytes)

0000 48 6c 69 6e 75 78 2e 6c 6f 63 61 6c 0a 50 72 6f Hlinux.local.Pro
0010 6f 74 0a 4a 54 75 72 62 6f 50 72 69 6e 74 20 54 ot.JTurboPrint T
0020 65 73 74 70 61 67 65 0a 6c 64 66 41 39 38 32 6c estpage.ldfA982l
0030 69 6e 75 78 2e 6c 6f 63 61 6c 0a 55 64 66 41 39 inux.local.UdfA9
0040 38 32 6c 69 6e 75 78 2e 6c 6f 63 61 6c 0a 4e 54 82linux.local.NT
0050 75 72 62 6f 50 72 69 6e 74 20 54 65 73 74 70 61 urboPrint Testpa
0060 67 65 0a 00 ge..
Data: 486C696E75782E6C6F63616C0A50726F6F740A4A54757262...
[Length: 100]

No. Time Source Destination Protocol Info
85 64.122946 192.168.2.2 192.168.2.20 LPD LPD response

Frame 85 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: EdimaxCo_d2:fc:81 (00:00:b4:d2:fc:81), Dst: EdimaxTe_aa:77:f2 (00:0e:2e:aa:77:f2)
Internet Protocol, Src: 192.168.2.2 (192.168.2.2), Dst: 192.168.2.20 (192.168.2.20)
Transmission Control Protocol, Src Port: printer (515), Dst Port: 1023 (1023), Seq: 3, Ack: 129, Len: 1
Source port: printer (515)
Destination port: 1023 (1023)
[Stream index: 2]
Sequence number: 3 (relative sequence number)
[Next sequence number: 4 (relative sequence number)]
Acknowledgement number: 129 (relative ack number)
Header length: 20 bytes
Flags: 0x18 (PSH, ACK)
0... .... = Congestion Window Reduced (CWR): Not set
.0.. .... = ECN-Echo: Not set
..0. .... = Urgent: Not set
...1 .... = Acknowledgement: Set
.... 1... = Push: Set
.... .0.. = Reset: Not set
.... ..0. = Syn: Not set
.... ...0 = Fin: Not set
Window size: 1024
Checksum: 0xeef0 [validation disabled]
[Good Checksum: False]
[Bad Checksum: False]
[SEQ/ACK analysis]
[This is an ACK to the segment in frame: 84]
[The RTT to ACK the segment was: 0.005401000 seconds]
[Number of bytes in flight: 1]
Line Printer Daemon Protocol
Response: Success: accepted, proceed

No. Time Source Destination Protocol Info
86 64.123030 192.168.2.20 192.168.2.2 LPD LPQ: print short form of queue status / jobcmd: receive data file

MfG Robert
Back to top
View user's profile Send private message
Hollowman
Guru
Guru


Joined: 19 Apr 2007
Posts: 584

PostPosted: Wed Mar 10, 2010 5:42 pm    Post subject: Reply with quote

Hi

Wo hast du den Treiber für den Drucker her? Hast du die ppt vom Hersteller genommen?

Sebastian
Back to top
View user's profile Send private message
roha
n00b
n00b


Joined: 01 Sep 2002
Posts: 31

PostPosted: Wed Mar 10, 2010 6:29 pm    Post subject: Reply with quote

Ich habe einmal den neuesten Gutenprinttreiber für meinen Drucker probiert,
außerdem den neuesten Turboprint2 Treiber für meinen Drucker, habe die
Vollversion von Turboprint2 gekauft. Mit beiden Treibern direkt am USB Port
des Rechner sehr schnelle Ausdrucke, über den Netzwerkprintserver super
langsame Ausdrucke.

MfG Robert
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum