Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Wlan Problem beim Start
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
rovdyr
n00b
n00b


Joined: 15 Jan 2003
Posts: 26
Location: Flensburg

PostPosted: Mon Apr 19, 2010 6:12 pm    Post subject: Wlan Problem beim Start Reply with quote

Hallo,

ich habe mal eine Frage an euch, da ich irgendwie festhänge.
Mein gentoo hat einen AVM Fritz USB Dongle per ndiswrapper eingebunden und ich habe wpa_supplicant installiert.
Die /etc/conf.d/wpa_supplicant ist konfiguriert und funktioniert eigentlich und die /etc/conf.d/net sollte auch gehen.

Das Problem ist, dass beim Start meine net.wlan1 nicht gestartet bzw. gestartet wird, aber dann wohl noch nicht funktioniert.
Wenn ich nach dem Start ein /etc/init.d/net.wlan1 restart mache, dann funktioniert es.

Ich poste jetzt mal ein paar Daten zur besseren Übersicht.

/etc/conf.d/net
Code:

modules=( "wpa_supplicant" )
wpa_supplicant_wlan1="-Dwext"
config_wlan1=( "192.168.10.11 netmask 255.255.255.0 brd 192.168.10.255" )
routes_wlan1=( "default via 192.168.10.1" )



/etc/conf.d/wpa_supplicant
Code:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1

network={
   ssid="station"
   psk="password"
   proto="WPA RSN"
   key_mgmt="WPA-PSK"
   pairwise="CCMP TKIP"
   group="CCMP TKIP"
   priority=5}



rc-update show
Code:

         termencoding |                                           boot
             bootmisc |                                           boot
               procfs |                                           boot
           ntp-client |          default
           localmount |                                           boot
                 udev |                                   sysinit
                  nfs |          default
                 swap |                                           boot
             mount-ro | shutdown
                 hald |          default
             netmount |          default
                acpid |          default
                  lvm |                                           boot
                  xdm |          default
              modules |                                           boot
                devfs |                                   sysinit
            net.wlan1 |          default
               net.lo |                                           boot
                 dbus |          default
        device-mapper |                                           boot
                 mtab |                                           boot
              hwclock |                                           boot
       udev-postmount |          default
            syslog-ng |          default
              keymaps |                                           boot
                 root |                                           boot
                 sshd |          default
                 fsck |                                           boot
               sysctl |                                           boot
            alsasound |                                           boot
          consolefont |                                           boot
           vixie-cron |          default
            killprocs | shutdown
                dmesg |                                   sysinit
                local |          default nonetwork
              urandom |                                           boot
             hostname |                                           boot
            savecache | shutdown



Ein /etc/init.d/net.wlan1 restart sieht so aus
Code:

 * Stopping sshd ...                                                      [ ok ]
 * Bringing down interface wlan1
 *   Removing addresses
 *     192.168.10.11/24
 *     Stopping wpa_cli on wlan1 ...                                      [ ok ]
 *     Stopping wpa_supplicant on wlan1 ...                               [ ok ]
 * Bringing up interface wlan1
 *   Starting wpa_supplicant on wlan1 ...                                 [ ok ]
 *   Starting wpa_cli on wlan1 ...                                        [ ok ]
 *   Backgrounding ... ...
 * WARNING: net.wlan1 has started, but is inactive
 * WARNING: sshd is scheduled to started when net.wlan1 has started



Vielleicht hat jemand eine Idee, warum net.wlan1 nicht beim Start schon funktioniert?!

#
rovdyr
Back to top
View user's profile Send private message
rovdyr
n00b
n00b


Joined: 15 Jan 2003
Posts: 26
Location: Flensburg

PostPosted: Fri Apr 23, 2010 7:43 pm    Post subject: Reply with quote

Ich bin es noch mal... hat wirklich keiner eine Ahnung wie das lösen kann?
Falls ihr noch mehr Daten oder Informationen zum Problem braucht, reiche ich gerne welche nach.

#
hilsen
rovdyr
Back to top
View user's profile Send private message
firefly
Advocate
Advocate


Joined: 31 Oct 2002
Posts: 4459

PostPosted: Sat Apr 24, 2010 3:05 pm    Post subject: Reply with quote

was kommt, wenn du wpa_supplicant von hand startest?
Code:
wpa_supplicant -Dwext -i wlan1 -c/etc/conf.d/wpa_supplicant

_________________
Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn.
Back to top
View user's profile Send private message
rovdyr
n00b
n00b


Joined: 15 Jan 2003
Posts: 26
Location: Flensburg

PostPosted: Sun Apr 25, 2010 11:05 am    Post subject: Reply with quote

Hallo firefly,

hier kommt deine angefragte Ausgabe:

wpa_supplicant -Dwext -i wlan1 -c/etc/conf.d/wpa_supplicant
Code:

ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:15:0c:38:7c:64 (SSID='WLAN-Rumpel' freq=2437 MHz)
Associated with 00:15:0c:38:7c:64
WPA: Key negotiation completed with 00:15:0c:38:7c:64 [PTK=TKIP GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to 00:15:0c:38:7c:64 completed (auth) [id=0 id_str=]



iwconfig
Code:

lo        no wireless extensions.

eth0      no wireless extensions.

sit0      no wireless extensions.

wlan1     IEEE 802.11g  ESSID:"WLAN-Rumpel"
          Mode:Managed  Frequency:2.437 GHz  Access Point: 00:15:0C:38:7C:64
          Bit Rate=54 Mb/s   Tx-Power:10 dBm   Sensitivity=0/3
          RTS thr:off   Fragment thr:off
          Encryption key:2510-9896-9C78-B085-5216-9231-4EF4-B5E0-EA49-FD28-FAA4-AE4D-EE9A-7B7F-8182-CE60   Security mode:restricted
          Power Management:off
          Link Quality:82/100  Signal level:-43 dBm  Noise level:-96 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


Ausschnitt aus der /var/log/rc.log
Code:

 * Loading key mappings [de-latin1-nodeadkeys] ...
 [ ok ]
 * Bringing up interface lo
 *   127.0.0.1/8 ...
 [ ok ]
 *   Adding routes
 *     127.0.0.0/8 via 127.0.0.1 ...
 [ ok ]
 * Mounting USB device filesystem [usbfs] ...
 [ ok ]
 * Mounting NFS filesystem ...
 [ ok ]
 * Mounting misc binary format filesystem ...
 [ ok ]
 * Activating swap devices ...
 [ ok ]
 * Initializing random number generator ...
 [ ok ]
 * Starting syslog-ng ...
 [ ok ]
 * Starting acpid ...
 [ ok ]
 * Starting D-BUS system messagebus ...
 [ ok ]
 * Starting Hardware Abstraction Layer daemon ...
 [ ok ]
 * Setting clock via the NTP client 'ntpdate' ...
Name server cannot be used, exiting * Failed to set clock
 [ !! ]
 * ERROR: ntp-client failed to start
 * Starting portmap ...
 [ ok ]
 * Starting NFS statd ...
 [ ok ]
 * Starting NFS mountd ...
 [ ok ]
 * Starting NFS daemon ...
 [ ok ]
 * Starting NFS smnotify ...
 [ ok ]
 * Mounting network filesystems ...
mount.nfs: DNS resolution failed for 192.168.10.10: Name or service not known
 * Could not mount all network filesystems
 [ !! ]
 * Setting up slim ...
 [ ok ]
 * Starting sshd ...
 [ ok ]
 * Starting vixie-cron ...
 [ ok ]
 * Starting local ...
 [ ok ]


Also verbinden tut er sich, aber nur wenn ich es per Hand mache.
Beim Starten des Systems macht er es aber nicht, deshalb habe ich noch mal ein bootlog mit rangehängt.

#
hilsen
rovdyr
Back to top
View user's profile Send private message
rovdyr
n00b
n00b


Joined: 15 Jan 2003
Posts: 26
Location: Flensburg

PostPosted: Sun May 02, 2010 6:51 pm    Post subject: Reply with quote

Hi,

ich bin es wieder, da ich immer noch nicht weitergekommen bin, wollte ich mal fragen, ob vielleicht doch jemand eine Lösung für das Problem hat?
Bin für jede Hilfe dankbar.

#
rovdyr
_________________
work - intel e6850 2x3ghz | 8gb ram | nv gts 250 | 2x22" tft | gentoo linux
server - buffalo ls mini | 500mhz | 128mb ram | gentoo linux
router- avm fritzbox 7170 | dsl 16 mbit/s
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum