Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Pappy's Kernel Seeds Part III<Closed. Please use new thread>
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 6, 7, 8 ... 22, 23, 24  Next  
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Wed Sep 22, 2010 6:48 am    Post subject: Reply with quote

Well, it's good to know that I was safe even before I patched the kernel (manually).

As for 2.6.35-gentoo-r7, no, it is not patched. I have that version up, and the patch has NOT been applied. In other words, the problem remains.

I know 2.6.35-gentoo-r8 is patched, because I also have that source as well...and I checked it for patching as soon as I received it. After you apply a patch manually a few times, you get to know what you're replacing...at least I do.

I will most likely be putting up the seeds for the two latest gentoo-sources releases later this morning.

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Wed Sep 22, 2010 7:45 am    Post subject: Reply with quote

And true to my word, here I am to say I just uploaded .configs for 2.6.32-gentoo-r18 and 2.6.35-gentoo-r8 in both x86 and x86_64 flavors. Enjoy!

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Wed Sep 22, 2010 7:46 am    Post subject: Reply with quote

I'm now a watchman. I'm no longer an advocate! WDFD!

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
Anon-E-moose
Advocate
Advocate


Joined: 23 May 2008
Posts: 3838
Location: Dallas area

PostPosted: Wed Sep 22, 2010 10:14 am    Post subject: Reply with quote

pappy_mcfae wrote:
I'm now a watchman. I'm no longer an advocate! WDFD!

Cheers,
Pappy

:lol:
_________________
Asus m5a99fx, FX 8320 - nouveau, oss4, rx550 for qemu passthrough
Acer laptop E5-575, i3-7100u - i965, alsa
---both---
5.0.13 zen kernel, profile 17.0 (no-pie) amd64-no-multilib
gcc 8.2.0, eudev, openrc, openbox, palemoon
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Wed Sep 22, 2010 11:49 am    Post subject: Reply with quote

Yeah, you are one of the few now.
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 699
Location: IL

PostPosted: Wed Sep 22, 2010 1:54 pm    Post subject: Reply with quote

pappy_mcfae wrote:
Well, it's good to know that I was safe even before I patched the kernel (manually).

As for 2.6.35-gentoo-r7, no, it is not patched. I have that version up, and the patch has NOT been applied. In other words, the problem remains.

I know 2.6.35-gentoo-r8 is patched, because I also have that source as well...and I checked it for patching as soon as I received it. After you apply a patch manually a few times, you get to know what you're replacing...at least I do.

I will most likely be putting up the seeds for the two latest gentoo-sources releases later this morning.

Cheers,
Pappy


Thank you Pappy..

So, I am on 2.6.35-gentoo-r8 now.

Good day.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Wed Sep 22, 2010 6:37 pm    Post subject: Reply with quote

You're most welcome. Happy gentooing.

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
jurrie
Apprentice
Apprentice


Joined: 14 Mar 2004
Posts: 177
Location: Netherlands

PostPosted: Fri Sep 24, 2010 4:38 pm    Post subject: Reply with quote

After a hiatus in which I did not tinker with operating systems for a while I felt the urge to install Gentoo again, though I used the Funtoo method now. Even though I have never used different methods, creating the first kernel using menuconfig has always been an annoying part, since I always tended to leave out stuff and had to boot multiple times to get it right....

Good thing I tried a kernel seed now! Using the nice guide on your website, I managed to get a full fledged kernel recognising all my hardware on the first go! (good thing I thought of enabling OHCI or it would't have worked 100% :-)). Thanks Pappy!

I just had to snicker thinking back of reading the first post of someone joining the gentoo forums years ago. He was very polite and enthousiastic about his upcoming linux adventure and did not give up when encountering some set-backs. I never forgot the first thread he started and the enthousiasm of his posts. That was you, Pappy. Good to see the things you accomplished! Glad you're here :-)
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Fri Sep 24, 2010 5:41 pm    Post subject: Reply with quote

Thank you for those lovely words. It was easy to be a member here at these forums. I came from the Linuxquestions Slackware forum, where I was treated like dirt. Once here, I found people who were like, "go ahead. Experiment. Have fun." What a lovely change from "that's how Pat does it, so that's how it's done."

How could I resist?

Cheers, and thanks again for the words.
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Mon Sep 27, 2010 7:38 am    Post subject: Reply with quote

I've just uploaded .configs for 2.6.32.23 and 2.6.35.6 in both x86 and x86_64 flavors. Enjoy!

Also, it appears as if the site was down for some period of time Sunday. Somehow, the IP address decided to change, and the DNS site I use doesn't respond well to that. It is fixed now.

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Tue Sep 28, 2010 11:08 am    Post subject: Reply with quote

To prove how devoted I am to this site, I've stayed up extra late (early) to make sure the new .configs got setup. I was resurrecting some old SCSI drives to see about selling them. Not sure how that's gone, but I'll find out more tomorrow.

Nonetheless, I've just uploaded .configs for 2.6.32-gentoo-r19, 2.6.34-gentoo-r11, 2.6.35-gentoo-r9, and 2.6.35-hardened in both x86 and x86_64 flavors. Enjoy!

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Fri Oct 01, 2010 8:16 am    Post subject: Reply with quote

It's definitely fall here in Dallas. I can actually work without drowning in my own sweat. I'm sure my keyboards appreciate that. Drifting in on the fall air comes some new sources.

I've just uploaded .configs for 2.6.32-hardened-r19, 2.6.32-tuxonice-r18, 2.6.34-tuxonice-r7, 2.6.35.7, 2.6.35-hardened-r1, and 2.6.35-tuxonice-r4 in both x86 and x86_64 flavors. Enjoy!

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
Anon-E-moose
Advocate
Advocate


Joined: 23 May 2008
Posts: 3838
Location: Dallas area

PostPosted: Fri Oct 01, 2010 10:58 am    Post subject: Reply with quote

pappy_mcfae wrote:
It's definitely fall here in Dallas. I can actually work without drowning in my own sweat. I'm sure my keyboards appreciate that. Drifting in on the fall air comes some new sources.


:lol: two thumbs up
_________________
Asus m5a99fx, FX 8320 - nouveau, oss4, rx550 for qemu passthrough
Acer laptop E5-575, i3-7100u - i965, alsa
---both---
5.0.13 zen kernel, profile 17.0 (no-pie) amd64-no-multilib
gcc 8.2.0, eudev, openrc, openbox, palemoon
Back to top
View user's profile Send private message
dreadlorde
Apprentice
Apprentice


Joined: 16 Dec 2008
Posts: 243
Location: /adm/timezone/US_Michigan

PostPosted: Sat Oct 02, 2010 2:50 am    Post subject: Reply with quote

In the morning to ya, pappy. I just purchased a new ThinkPad W510, and I'm almost finished installing funtoo on it, but I'm running into some speed bumps. I'm using your kernel seed for 2.6.35.5, with the brainfuck scheduler and reiser4 patches. With my first attempt, I managed to get a kernel that booted, but USB doesn't work (it does on systemrecuecd, so I know that it does work with lunix). I'm also having trouble finding a driver called ``i810_rng.'' I would appreciate it if you could look at current .config and see if you can find what I missed.

Here's the output of `lspci -n'
Code:

00:00.0 0600: 8086:d132 (rev 11)
00:03.0 0604: 8086:d138 (rev 11)
00:08.0 0880: 8086:d155 (rev 11)
00:08.1 0880: 8086:d156 (rev 11)
00:08.2 0880: 8086:d157 (rev 11)
00:08.3 0880: 8086:d158 (rev 11)
00:10.0 0880: 8086:d150 (rev 11)
00:10.1 0880: 8086:d151 (rev 11)
00:16.0 0780: 8086:3b64 (rev 06)
00:16.3 0700: 8086:3b67 (rev 06)
00:19.0 0200: 8086:10ea (rev 06)
00:1a.0 0c03: 8086:3b3c (rev 06)
00:1b.0 0403: 8086:3b56 (rev 06)
00:1c.0 0604: 8086:3b42 (rev 06)
00:1c.1 0604: 8086:3b44 (rev 06)
00:1c.3 0604: 8086:3b48 (rev 06)
00:1c.4 0604: 8086:3b4a (rev 06)
00:1c.6 0604: 8086:3b4e (rev 06)
00:1c.7 0604: 8086:3b50 (rev 06)
00:1d.0 0c03: 8086:3b34 (rev 06)
00:1e.0 0604: 8086:2448 (rev a6)
00:1f.0 0601: 8086:3b07 (rev 06)
00:1f.2 0106: 8086:3b2f (rev 06)
00:1f.3 0c05: 8086:3b30 (rev 06)
01:00.0 0300: 10de:0a3c (rev a2)
01:00.1 0403: 10de:0be2 (rev a1)
03:00.0 0280: 8086:4238 (rev 35)
0d:00.0 0805: 1180:e822 (rev 01)
0d:00.1 0880: 1180:e230 (rev 01)
0f:00.0 0c03: 1033:0194 (rev 03)
17:00.0 0805: 1180:e822 (rev 01)
17:00.3 0c00: 1180:e832 (rev 01)
ff:00.0 0600: 8086:2c52 (rev 04)
ff:00.1 0600: 8086:2c81 (rev 04)
ff:02.0 0600: 8086:2c90 (rev 04)
ff:02.1 0600: 8086:2c91 (rev 04)
ff:03.0 0600: 8086:2c98 (rev 04)
ff:03.1 0600: 8086:2c99 (rev 04)
ff:03.4 0600: 8086:2c9c (rev 04)
ff:04.0 0600: 8086:2ca0 (rev 04)
ff:04.1 0600: 8086:2ca1 (rev 04)
ff:04.2 0600: 8086:2ca2 (rev 04)
ff:04.3 0600: 8086:2ca3 (rev 04)
ff:05.0 0600: 8086:2ca8 (rev 04)
ff:05.1 0600: 8086:2ca9 (rev 04)
ff:05.2 0600: 8086:2caa (rev 04)
ff:05.3 0600: 8086:2cab (rev 04)

`cat /proc/cpuinfo'
Code:

processor   : 0
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 0
cpu cores   : 4
apicid      : 0
initial apicid   : 0
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.78
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 1
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 0
cpu cores   : 4
apicid      : 1
initial apicid   : 1
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.46
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 2
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 1
cpu cores   : 4
apicid      : 2
initial apicid   : 2
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.47
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 3
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 1
cpu cores   : 4
apicid      : 3
initial apicid   : 3
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.47
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 4
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 2
cpu cores   : 4
apicid      : 4
initial apicid   : 4
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.45
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 5
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 2
cpu cores   : 4
apicid      : 5
initial apicid   : 5
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.45
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 6
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 3
cpu cores   : 4
apicid      : 6
initial apicid   : 6
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.45
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 7
vendor_id   : GenuineIntel
cpu family   : 6
model      : 30
model name   : Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz
stepping   : 5
cpu MHz      : 1595.891
cache size   : 6144 KB
physical id   : 0
siblings   : 8
core id      : 3
cpu cores   : 4
apicid      : 7
initial apicid   : 7
fpu      : yes
fpu_exception   : yes
cpuid level   : 11
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid
bogomips   : 3191.48
clflush size   : 64
cache_alignment   : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

`cat /etc/fstab'
Code:

/dev/sda5      none      swap      sw      0 0
/dev/sda6      /      ext2      noatime      0 1
/dev/sda7      /usr      reiserfs   noatime,notail      0 1
/dev/sda8      /usr/portage   reiser4      defaults,noatime,nodiratime 0 1
/dev/sda9      /var      reiser4      defaults,noatime,nodiratime 0 1
/dev/sda10      /home      reiserfs   noatime,notail 0 1
/dev/cdrom      /mnt/cdrom   auto      noauto,ro   0 0


Thanks for any help.
_________________
Ludwig von Mises Institute
Quote:
I am not to be a shepherd, I am not to be a grave-digger. No longer will I speak to the people; for the last time I have spoken to the dead.
Back to top
View user's profile Send private message
1clue
Advocate
Advocate


Joined: 05 Feb 2006
Posts: 2534

PostPosted: Sat Oct 02, 2010 11:37 pm    Post subject: Reply with quote

Hey.

I'm completely incapable of making a happy kernel. I need help, and I will grovel at the feet of anyone who will help.

I made a thread for it here: https://forums.gentoo.org/viewtopic-t-847062.html

Thanks.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Sun Oct 03, 2010 6:22 am    Post subject: Reply with quote

dreadlorde,

i810_rng is actually more for .24 kernels. It is a way to interface to the random number generator within the CPU for things that require random numbers. The .26 version is called something else, and that setting shows up under character devices. I turned that on.

Also, you appear to have the latest USB setup (USB 3.0). Hopefully, setting the kernel to use that should be all that's needed to make things work. If you have further issues, turn off UHCI support and see if that clears the issue. Since things worked with your install disk, it should also work with this version of the kernel. You will have to re-run make oldconfig and make xconfig (or whatever you use) to restore the support for reiser4 and BFS.

I also turned on module support as wireless devices and networking adapters much prefer modules to drivers being compiled into the kernel. I know there are those who would debate this, but when the help tells you to use modules, they aren't pulling your leg.

Click here for your new .config. Compile as is.

For the best results, please do the following:

1) Move your .config file out of your kernel source directory (/usr/src/linux-2.6.35.5 ).
2) Issue the command make mrproper. This is a destructive step. It returns the source to pristine condition. Unmoved .config files will be deleted!
3) Copy my .config into your source directory.
4) Issue the command make && make modules_install.
5) Install the kernel as you normally would, and reboot.
6) Once it boots, please post /var/log/dmesg so I can see how things loaded.

Let me know how things go.

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Mon Oct 04, 2010 4:20 am    Post subject: Reply with quote

1clue,

No grovelling required, but donations are appreciated and encouraged. :wink: :wink: :wink:

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
lixo1
Tux's lil' helper
Tux's lil' helper


Joined: 25 Sep 2010
Posts: 84

PostPosted: Mon Oct 04, 2010 1:05 pm    Post subject: Reply with quote

Hi pappy_mcfae,

I would like to ask you help about my HP Envy 17 kernel configuration.
In fact I'm getting memory corruption in low memory, see
https://forums.gentoo.org/viewtopic-t-847103.html

and also graphics brightness during boot:
https://forums.gentoo.org/viewtopic-t-847118.html

Thank you very much for any kind of help!
Back to top
View user's profile Send private message
lixo1
Tux's lil' helper
Tux's lil' helper


Joined: 25 Sep 2010
Posts: 84

PostPosted: Mon Oct 04, 2010 4:37 pm    Post subject: Reply with quote

And here you have more useful information.

The lspci -n
Code:

00:00.0 0600: 8086:d132 (rev 11)
00:03.0 0604: 8086:d138 (rev 11)
00:08.0 0880: 8086:d155 (rev 11)
00:08.1 0880: 8086:d156 (rev 11)
00:08.2 0880: 8086:d157 (rev 11)
00:08.3 0880: 8086:d158 (rev 11)
00:10.0 0880: 8086:d150 (rev 11)
00:10.1 0880: 8086:d151 (rev 11)
00:16.0 0780: 8086:3b64 (rev 06)
00:1a.0 0c03: 8086:3b3c (rev 05)
00:1b.0 0403: 8086:3b56 (rev 05)
00:1c.0 0604: 8086:3b42 (rev 05)
00:1c.1 0604: 8086:3b44 (rev 05)
00:1c.2 0604: 8086:3b46 (rev 05)
00:1d.0 0c03: 8086:3b34 (rev 05)
00:1e.0 0604: 8086:2448 (rev a5)
00:1f.0 0601: 8086:3b09 (rev 05)
00:1f.2 0106: 8086:3b29 (rev 05)
00:1f.3 0c05: 8086:3b30 (rev 05)
01:00.0 0300: 1002:68a1
01:00.1 0403: 1002:aa58                                                                                                     
02:00.0 0280: 14e4:4353 (rev 01)                                                                                             
03:00.0 0200: 10ec:8168 (rev 03)
04:00.0 0c03: 1033:0194 (rev 03)
7f:00.0 0600: 8086:2c52 (rev 04)
7f:00.1 0600: 8086:2c81 (rev 04)
7f:02.0 0600: 8086:2c90 (rev 04)
7f:02.1 0600: 8086:2c91 (rev 04)
7f:03.0 0600: 8086:2c98 (rev 04)
7f:03.1 0600: 8086:2c99 (rev 04)
7f:03.4 0600: 8086:2c9c (rev 04)
7f:04.0 0600: 8086:2ca0 (rev 04)
7f:04.1 0600: 8086:2ca1 (rev 04)
7f:04.2 0600: 8086:2ca2 (rev 04)
7f:04.3 0600: 8086:2ca3 (rev 04)
7f:05.0 0600: 8086:2ca8 (rev 04)
7f:05.1 0600: 8086:2ca9 (rev 04)
7f:05.2 0600: 8086:2caa (rev 04)
7f:05.3 0600: 8086:2cab (rev 04)


the /proc/cpuinfo is the same like dreadlorde, an Intel i7 Q720 cpu family 6 model 30

the .config http://pastebin.com/ibZhhpmW

the fstab
Code:

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/sdb1               /boot           ext2            noauto,noatime  1 2
/dev/sdb3               /               ext3            noatime         0 1
/dev/sdb2               none            swap            sw              0 0
/dev/cdrom              /mnt/cdrom      auto            noauto,user     0 0
/dev/sdc1               /mnt/disk       auto            noauto,user     0 0
#/dev/sda2              /mnt/hd         auto            noauto,noatime  0 0
#/dev/fd0               /mnt/floppy     auto            noauto          0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
#  use almost no memory if not populated with files)
proc                    /proc           proc            default                 0 0
shm                     /dev/shm        tmpfs           nodev,nosuid,noexec     0 0
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Thu Oct 07, 2010 7:28 am    Post subject: Reply with quote

Well, it's been a busy day. Too bad I don't make money for all the work, but such is life in the world of open source software. I've just uploaded .configs for 2.6.32-hardened-r20 and 2.6.35-gentoo-r10 in both x86 and x86_64 flavors. I also added settings page 11, and updated the other settings pages as well to add the new link to them. Enjoy!

My gratitude to Audiodef for his assistance with proofreading. Unfortunately for me, keeping someone who knows a bit about the kernel to double-check has proved difficult. For that reason, if you see any issues in that page, please let me know. When you have an issue, also please include a URL for your information as I'm amassing information for the bibliography as I do the work.

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Fri Oct 08, 2010 8:12 am    Post subject: Reply with quote

Only one bit of new source in the hopper today. I just uploaded .configs for 2.6.35-hardened-r2 in both x86 and x86_64 flavors. Enjoy!

The new still hasn't rubbed off the latest settings page. You can check it out as well while checking out the latest seeds.

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Sat Oct 09, 2010 8:03 am    Post subject: Reply with quote

Another day, another lonely source release. I've just uploaded .configs for 2.6.35-tuxonice-r5 in both x86 and x86_64 flavors. Enjoy!

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
Jallee
n00b
n00b


Joined: 17 Oct 2010
Posts: 12
Location: Lappland Sweden

PostPosted: Sun Oct 17, 2010 12:34 pm    Post subject: Reply with quote

Hi pappy_mcfae.
Just want to say tanks to all your great .configs
Just used one four my 2.6.35-gentoo-r10 config
Greetings from Sweeden .. :D
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Sun Oct 17, 2010 8:23 pm    Post subject: Reply with quote

You are most welcome!

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
pappy_mcfae
Watchman
Watchman


Joined: 27 Dec 2007
Posts: 5997
Location: Pomona, California.

PostPosted: Sun Oct 17, 2010 11:54 pm    Post subject: Reply with quote

Two new hardened sources means more seeds. I've just uploaded .configs for 2.6.32-hardened-r21 and 2.6.35-hardened-r3 in both x86 and x86_64 flavors. Enjoy!

Also note the failover site has changed IP address temporarily. http://62.3.120.142/~pappy/ will get you to the failover until further notice.

Cheers,
Pappy
_________________
This space left intentionally blank, except for these ASCII symbols.
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page Previous  1, 2, 3 ... 6, 7, 8 ... 22, 23, 24  Next
Page 7 of 24

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum