Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
cups mit hplip setzt Drucker automatisch in offline mode
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
aZZe
l33t
l33t


Joined: 20 Feb 2003
Posts: 965
Location: Dinslaken, Germany

PostPosted: Sun Jun 13, 2010 5:24 pm    Post subject: cups mit hplip setzt Drucker automatisch in offline mode Reply with quote

Hallo,

ich habe das Problem, dass cups mir meinen HP Officejet J4580 automatisch offline setzt wenn irgendein Programm darauf zugreift. Das macht er aber nur beim ersten Zugriff. Setzte ich den Drucker wieder online Kann ich tausend Dokumente drucken ohne Probleme. Nur beim allerersten Mal ist er aufeinmal disconnected. Ich habe es erst mit stable Paketen von cups und hplip probiert und dann mit den allerneusten (cups-1.4.3 und hplip-3.10.5).

Ich habe mal genau mitgelogt was passiert wenn ich den Drucker nach dem Start des PCs einschalte und darauf dann zugreife z.B. was aus Office drucken oder über den HP-Manager den Status des Druckers abfragen. Dort wo der Umbruch ist habe ich den HP-Manager geöffnet, der auf den Drucker zugegriffen hat. Danach war der Drucker dann offline:


/var/log/syslog:

Jun 13 19:10:41 homepc klogd: [  126.055910] usb usb1: usb resume
Jun 13 19:10:41 homepc klogd: [  126.055921] ehci_hcd 0000:00:12.2: resume root hub
Jun 13 19:10:41 homepc klogd: [  126.096051] hub 1-0:1.0: hub_resume
Jun 13 19:10:41 homepc klogd: [  126.096083] ehci_hcd 0000:00:12.2: GetStatus port 4 status 001002 POWER sig=se0 CSC
Jun 13 19:10:41 homepc klogd: [  126.197063] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
Jun 13 19:10:44 homepc klogd: [  128.704059] hub 1-0:1.0: hub_suspend
Jun 13 19:10:44 homepc klogd: [  128.704074] usb usb1: bus auto-suspend
Jun 13 19:10:44 homepc klogd: [  128.704080] ehci_hcd 0000:00:12.2: suspend root hub
Jun 13 19:10:47 homepc klogd: [  132.261870] usb usb1: usb resume
Jun 13 19:10:47 homepc klogd: [  132.261881] ehci_hcd 0000:00:12.2: resume root hub
Jun 13 19:10:47 homepc klogd: [  132.302043] hub 1-0:1.0: hub_resume
Jun 13 19:10:47 homepc klogd: [  132.302078] ehci_hcd 0000:00:12.2: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
Jun 13 19:10:47 homepc klogd: [  132.302087] hub 1-0:1.0: port 4: status 0501 change 0001
Jun 13 19:10:47 homepc klogd: [  132.403057] hub 1-0:1.0: state 7 ports 6 chg 0010 evt 0000
Jun 13 19:10:47 homepc klogd: [  132.403078] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
Jun 13 19:10:48 homepc klogd: [  132.454064] ehci_hcd 0000:00:12.2: port 4 high speed
Jun 13 19:10:48 homepc klogd: [  132.454077] ehci_hcd 0000:00:12.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
Jun 13 19:10:48 homepc klogd: [  132.505052] usb 1-4: new high speed USB device using ehci_hcd and address 4
Jun 13 19:10:48 homepc klogd: [  132.556067] ehci_hcd 0000:00:12.2: port 4 high speed
Jun 13 19:10:48 homepc klogd: [  132.556080] ehci_hcd 0000:00:12.2: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
Jun 13 19:10:48 homepc klogd: [  132.620068] usb 1-4: default language 0x0409
Jun 13 19:10:48 homepc klogd: [  132.620438] usb 1-4: udev 4, busnum 1, minor = 3
Jun 13 19:10:48 homepc klogd: [  132.620444] usb 1-4: New USB device found, idVendor=03f0, idProduct=2a12
Jun 13 19:10:48 homepc klogd: [  132.620451] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 13 19:10:48 homepc klogd: [  132.620457] usb 1-4: Product: Officejet J4500 series
Jun 13 19:10:48 homepc klogd: [  132.620462] usb 1-4: Manufacturer: HP
Jun 13 19:10:48 homepc klogd: [  132.620466] usb 1-4: SerialNumber: CN8CA570DS052T
Jun 13 19:10:48 homepc klogd: [  132.620592] usb 1-4: uevent
Jun 13 19:10:48 homepc klogd: [  132.620634] usb 1-4: usb_probe_device
Jun 13 19:10:48 homepc klogd: [  132.620641] usb 1-4: configuration #1 chosen from 1 choice
Jun 13 19:10:48 homepc klogd: [  132.620825] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
Jun 13 19:10:48 homepc klogd: [  132.620859] usb 1-4:1.0: uevent
Jun 13 19:10:48 homepc klogd: [  132.620956] usb 1-4: adding 1-4:1.1 (config #1, interface 1)
Jun 13 19:10:48 homepc klogd: [  132.620987] usb 1-4:1.1: uevent
Jun 13 19:10:48 homepc klogd: [  132.621033] usblp 1-4:1.1: usb_probe_interface
Jun 13 19:10:48 homepc klogd: [  132.621043] usblp 1-4:1.1: usb_probe_interface - got id
Jun 13 19:10:48 homepc klogd: [  132.622455] drivers/usb/core/file.c: looking for a minor, starting at 0
Jun 13 19:10:48 homepc klogd: [  132.622573] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2A12
Jun 13 19:10:48 homepc klogd: [  132.622588] usb 1-4: adding 1-4:1.2 (config #1, interface 2)
Jun 13 19:10:48 homepc klogd: [  132.622634] usb 1-4:1.2: uevent
Jun 13 19:10:48 homepc klogd: [  132.622716] drivers/usb/core/inode.c: creating file '004'
Jun 13 19:10:48 homepc klogd: [  132.624034] usb 1-4: uevent
Jun 13 19:10:48 homepc udev-configure-printer: add /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.1
Jun 13 19:10:48 homepc udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:12.2/usb1/1-4
Jun 13 19:10:48 homepc udev-configure-printer: Device vendor/product is 03F0:2A12
Jun 13 19:10:48 homepc klogd: [  132.646555] usb 1-4: uevent
Jun 13 19:10:48 homepc klogd: [  132.646773] usb usb7: usb auto-resume
Jun 13 19:10:48 homepc klogd: [  132.646780] ohci_hcd 0000:00:14.5: resume root hub
Jun 13 19:10:48 homepc udev-configure-printer: add /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.1/usb/lp0
Jun 13 19:10:48 homepc klogd: [  132.706040] hub 7-0:1.0: hub_resume
Jun 13 19:10:48 homepc klogd: [  132.706083] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 13 19:10:48 homepc klogd: [  132.706254] usb usb3: usb auto-resume
Jun 13 19:10:48 homepc klogd: [  132.706266] ohci_hcd 0000:00:12.0: resume root hub
Jun 13 19:10:48 homepc klogd: [  132.766014] hub 3-0:1.0: hub_resume
Jun 13 19:10:48 homepc klogd: [  132.766046] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
Jun 13 19:10:48 homepc klogd: [  132.766082] usb usb2: usb auto-resume
Jun 13 19:10:48 homepc klogd: [  132.766090] ehci_hcd 0000:00:13.2: resume root hub
Jun 13 19:10:48 homepc hal_lpadmin: Running hal_lpadmin
Jun 13 19:10:48 homepc klogd: [  132.786017] hub 2-0:1.0: hub_resume
Jun 13 19:10:48 homepc klogd: [  132.786055] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
Jun 13 19:10:48 homepc klogd: [  132.786090] usb usb6: usb auto-resume
Jun 13 19:10:48 homepc klogd: [  132.786096] ohci_hcd 0000:00:13.1: resume root hub
Jun 13 19:10:48 homepc klogd: [  132.846051] hub 6-0:1.0: hub_resume
Jun 13 19:10:48 homepc klogd: [  132.846094] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
Jun 13 19:10:48 homepc klogd: [  132.846226] usb usb5: usb auto-resume
Jun 13 19:10:48 homepc klogd: [  132.846237] ohci_hcd 0000:00:13.0: resume root hub
Jun 13 19:10:48 homepc klogd: [  132.906034] hub 5-0:1.0: hub_resume
Jun 13 19:10:48 homepc klogd: [  132.906092] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
Jun 13 19:10:48 homepc udev-configure-printer: failed to claim interface
Jun 13 19:10:48 homepc udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jun 13 19:10:48 homepc udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:12.2/usb1/1-4
Jun 13 19:10:48 homepc udev-configure-printer: MFG:HP MDL:Officejet J4500 series SERN:CN8CA570DS052T serial:CN8CA570DS052T
Jun 13 19:10:48 homepc klogd: [  132.907355] usb 1-4:1.1: uevent
Jun 13 19:10:48 homepc klogd: [  132.907389] usb 1-4: uevent
Jun 13 19:10:49 homepc klogd: [  133.704049] ohci_hcd 0000:00:14.5: auto-stop root hub
Jun 13 19:10:49 homepc hal_lpadmin: hal_lpadmin triggered by usblp kernel module
Jun 13 19:10:49 homepc hal_lpadmin: Using device ID from HAL database entry
Jun 13 19:10:49 homepc hal_lpadmin: add
Jun 13 19:10:49 homepc hal_lpadmin: URIs: ['usb://HP/Officejet%20J4500%20series?serial=CN8CA570DS052T', 'hal:///org/freedesktop/Hal/devices/usb_device_3f0_2a12_CN8CA570DS052T_if1_printer_CN8CA570DS052T']
Jun 13 19:10:49 homepc hal_lpadmin: HPLIP Fax URIs: None
Jun 13 19:10:49 homepc hal_lpadmin: Not adding printer: Officejet-J4500-series already exists
Jun 13 19:10:49 homepc klogd: [  133.954041] ohci_hcd 0000:00:12.0: auto-stop root hub
Jun 13 19:10:49 homepc klogd: [  133.954068] ohci_hcd 0000:00:13.1: auto-stop root hub
Jun 13 19:10:49 homepc klogd: [  133.954090] ohci_hcd 0000:00:13.0: auto-stop root hub
Jun 13 19:10:49 homepc klogd: [  133.978901] usb 1-4: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
Jun 13 19:10:49 homepc udev-configure-printer: SERN fields match
Jun 13 19:10:49 homepc udev-configure-printer: URI match: hp:/usb/Officejet_J4500_series?serial=CN8CA570DS052T
Jun 13 19:10:49 homepc udev-configure-printer: hp:/usb/Officejet_J4500_series?serial=CN8CA570DS052T twinned with hpfax:/usb/Officejet_J4500_series?serial=CN8CA570DS052T
Jun 13 19:10:49 homepc udev-configure-printer: Queue ipp://localhost:631/printers/Officejet_J4500 has matching device URI
Jun 13 19:10:49 homepc udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/Officejet_J4500
Jun 13 19:10:49 homepc udev-configure-printer: Queue ipp://localhost:631/printers/Officejet_J4500_fax has matching device URI
Jun 13 19:10:49 homepc udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/Officejet_J4500_fax
Jun 13 19:10:52 homepc klogd: [  136.704052] hub 3-0:1.0: hub_suspend
Jun 13 19:10:52 homepc klogd: [  136.704067] usb usb3: bus auto-suspend
Jun 13 19:10:52 homepc klogd: [  136.704075] ohci_hcd 0000:00:12.0: suspend root hub
Jun 13 19:10:52 homepc klogd: [  136.704087] hub 2-0:1.0: hub_suspend
Jun 13 19:10:52 homepc klogd: [  136.704093] usb usb2: bus auto-suspend
Jun 13 19:10:52 homepc klogd: [  136.704097] ehci_hcd 0000:00:13.2: suspend root hub
Jun 13 19:10:52 homepc klogd: [  136.705081] hub 5-0:1.0: hub_suspend
Jun 13 19:10:52 homepc klogd: [  136.705088] usb usb5: bus auto-suspend
Jun 13 19:10:52 homepc klogd: [  136.705093] ohci_hcd 0000:00:13.0: suspend root hub
Jun 13 19:10:52 homepc klogd: [  136.705102] hub 7-0:1.0: hub_suspend
Jun 13 19:10:52 homepc klogd: [  136.705109] usb usb7: bus auto-suspend
Jun 13 19:10:52 homepc klogd: [  136.705115] ohci_hcd 0000:00:14.5: suspend root hub
Jun 13 19:10:52 homepc klogd: [  136.705127] hub 6-0:1.0: hub_suspend
Jun 13 19:10:52 homepc klogd: [  136.705135] usb usb6: bus auto-suspend
Jun 13 19:10:52 homepc klogd: [  136.705144] ohci_hcd 0000:00:13.1: suspend root hub







Jun 13 19:11:23 homepc klogd: [  167.877090] usb usb7: usb auto-resume
Jun 13 19:11:23 homepc klogd: [  167.877097] ohci_hcd 0000:00:14.5: resume root hub
Jun 13 19:11:23 homepc klogd: [  167.936056] hub 7-0:1.0: hub_resume
Jun 13 19:11:23 homepc klogd: [  167.936117] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jun 13 19:11:23 homepc klogd: [  167.936298] usb usb3: usb auto-resume
Jun 13 19:11:23 homepc klogd: [  167.936310] ohci_hcd 0000:00:12.0: resume root hub
Jun 13 19:11:23 homepc klogd: [  167.996054] hub 3-0:1.0: hub_resume
Jun 13 19:11:23 homepc klogd: [  167.996116] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
Jun 13 19:11:23 homepc klogd: [  167.996255] usb usb2: usb auto-resume
Jun 13 19:11:23 homepc klogd: [  167.996264] ehci_hcd 0000:00:13.2: resume root hub
Jun 13 19:11:23 homepc klogd: [  168.016025] hub 2-0:1.0: hub_resume
Jun 13 19:11:23 homepc klogd: [  168.016080] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
Jun 13 19:11:23 homepc klogd: [  168.016224] usb usb6: usb auto-resume
Jun 13 19:11:23 homepc klogd: [  168.016235] ohci_hcd 0000:00:13.1: resume root hub
Jun 13 19:11:23 homepc klogd: [  168.076123] hub 6-0:1.0: hub_resume
Jun 13 19:11:23 homepc klogd: [  168.076205] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
Jun 13 19:11:23 homepc klogd: [  168.076326] usb usb5: usb auto-resume
Jun 13 19:11:23 homepc klogd: [  168.076337] ohci_hcd 0000:00:13.0: resume root hub
Jun 13 19:11:23 homepc klogd: [  168.136053] hub 5-0:1.0: hub_resume
Jun 13 19:11:23 homepc klogd: [  168.136109] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
Jun 13 19:11:23 homepc klogd: [  168.137039] usblp 1-4:1.1: disconnect by usbfs
Jun 13 19:11:23 homepc klogd: [  168.137070] drivers/usb/core/file.c: removing 0 minor
Jun 13 19:11:23 homepc klogd: [  168.137388] usblp0: removed
Jun 13 19:11:23 homepc hal_lpadmin: Running hal_lpadmin
Jun 13 19:11:24 homepc klogd: [  168.954046] ohci_hcd 0000:00:14.5: auto-stop root hub
Jun 13 19:11:24 homepc klogd: [  169.204045] ohci_hcd 0000:00:13.0: auto-stop root hub
Jun 13 19:11:24 homepc klogd: [  169.204058] ohci_hcd 0000:00:12.0: auto-stop root hub
Jun 13 19:11:24 homepc klogd: [  169.204086] ohci_hcd 0000:00:13.1: auto-stop root hub
Jun 13 19:11:24 homepc hal_lpadmin: hal_lpadmin triggered by usblp kernel module
Jun 13 19:11:24 homepc hal_lpadmin: Using device ID from HAL database entry
Jun 13 19:11:24 homepc hal_lpadmin: remove
Jun 13 19:11:24 homepc hal_lpadmin: Found configured printer: Officejet_J4500_fax
Jun 13 19:11:24 homepc hal_lpadmin: Disabled printer Officejet_J4500_fax, as the corresponding device was unplugged or turned off
Jun 13 19:11:24 homepc hal_lpadmin: Found configured printer: Officejet-J4500-series
Jun 13 19:11:24 homepc hal_lpadmin: Disabled printer Officejet-J4500-series, as the corresponding device was unplugged or turned off
Jun 13 19:11:24 homepc hal_lpadmin: Found configured printer: Officejet_J4500
Jun 13 19:11:24 homepc hal_lpadmin: Disabled printer Officejet_J4500, as the corresponding device was unplugged or turned off
Jun 13 19:11:26 homepc klogd: [  170.698064] hub 3-0:1.0: hub_suspend
Jun 13 19:11:26 homepc klogd: [  170.698081] usb usb3: bus auto-suspend
Jun 13 19:11:26 homepc klogd: [  170.698090] ohci_hcd 0000:00:12.0: suspend root hub
Jun 13 19:11:26 homepc klogd: [  170.698101] hub 6-0:1.0: hub_suspend
Jun 13 19:11:26 homepc klogd: [  170.698108] usb usb6: bus auto-suspend
Jun 13 19:11:26 homepc klogd: [  170.698114] ohci_hcd 0000:00:13.1: suspend root hub
Jun 13 19:11:26 homepc klogd: [  170.698123] hub 5-0:1.0: hub_suspend
Jun 13 19:11:26 homepc klogd: [  170.698129] usb usb5: bus auto-suspend
Jun 13 19:11:26 homepc klogd: [  170.698135] ohci_hcd 0000:00:13.0: suspend root hub
Jun 13 19:11:26 homepc klogd: [  170.702135] hub 7-0:1.0: hub_suspend
Jun 13 19:11:26 homepc klogd: [  170.702149] usb usb7: bus auto-suspend
Jun 13 19:11:26 homepc klogd: [  170.702156] ohci_hcd 0000:00:14.5: suspend root hub
Jun 13 19:11:26 homepc klogd: [  170.705067] hub 2-0:1.0: hub_suspend
Jun 13 19:11:26 homepc klogd: [  170.705079] usb usb2: bus auto-suspend
Jun 13 19:11:26 homepc klogd: [  170.705084] ehci_hcd 0000:00:13.2: suspend root hub


/var/log/messages:

Jun 13 19:11:23 homepc klogd: [  168.137388] usblp0: removed


Das zweite Problem ist, dass nach einem Neustart ein dritter Drucker aufeinmal auftaucht. Normalerweise hat der Officejet nur zwei (Drucker und Fax). Ich vermute mal, dass HAL hier irgendwie in die Quere kommt und auch einen Drucker am USB Port erkennt. Kann man das irgendwie unterdrücken?

Vielen Dank im Vorraus
_________________
ASUS 4A785TD-V EVO with AMD Phenom(tm) II X4 965
4GB RAM DDR3-1333
ATI Radeon HD4870
Back to top
View user's profile Send private message
Marlo
Veteran
Veteran


Joined: 26 Jul 2003
Posts: 1414

PostPosted: Tue Jun 15, 2010 1:35 pm    Post subject: Re: cups mit hplip setzt Drucker automatisch in offline mode Reply with quote

aZZe wrote:
Hallo,

ich habe das Problem, dass cups mir meinen HP Officejet J4580 automatisch offline setzt wenn irgendein Programm darauf zugreift. Das macht er aber nur beim ersten Zugriff.

Das zweite Problem ist, dass nach einem Neustart ein dritter Drucker aufeinmal auftaucht. Normalerweise hat der Officejet nur zwei (Drucker und Fax). Ich vermute mal, dass HAL hier irgendwie in die Quere kommt und auch einen Drucker am USB Port erkennt. Kann man das irgendwie unterdrücken?

Vielen Dank im Vorraus


Hallo aZZe,

irgendwo in der hplips doku steht, dass hplips zwar die Installation von cups braucht, aber alle Aktionen nur über hplips durchzuführen sind.
Nach meinen Erfahrungen stimmt das. Wenn man zwischendurch an cups was macht erscheint dort ein von cups eingerichteter Drucker, der
zu den o. g. Fehlern führt. Also über cups nur die Drucker löschen, Installation und Betrieb nur über hplips.

Grüße
Ma
_________________
Thank you for your attention, interest and support.
------------------------------------------------------------------
http://radio.garden/
Back to top
View user's profile Send private message
aZZe
l33t
l33t


Joined: 20 Feb 2003
Posts: 965
Location: Dinslaken, Germany

PostPosted: Tue Jun 15, 2010 6:19 pm    Post subject: Reply with quote

Das habe ich auch so gemacht. Nur nach einem Neustart wird automatisch ein Drucker hinzugefügt. Ich denke, dass HAL da eine Rolle mitspielt.
_________________
ASUS 4A785TD-V EVO with AMD Phenom(tm) II X4 965
4GB RAM DDR3-1333
ATI Radeon HD4870
Back to top
View user's profile Send private message
aZZe
l33t
l33t


Joined: 20 Feb 2003
Posts: 965
Location: Dinslaken, Germany

PostPosted: Thu Jun 17, 2010 8:07 am    Post subject: Reply with quote

Oder anders gefragt wie kann ich verhindern, dass beim booten automatisch Drucker hinzugefügt werden?
_________________
ASUS 4A785TD-V EVO with AMD Phenom(tm) II X4 965
4GB RAM DDR3-1333
ATI Radeon HD4870
Back to top
View user's profile Send private message
aZZe
l33t
l33t


Joined: 20 Feb 2003
Posts: 965
Location: Dinslaken, Germany

PostPosted: Sat Jun 19, 2010 9:49 pm    Post subject: Reply with quote

Habe das Problem ausfindig gemacht.

Code:

emerge -C hal-cups-utils


Ich wusste ja irgendwie hat es was mit hal zu tun ;)
_________________
ASUS 4A785TD-V EVO with AMD Phenom(tm) II X4 965
4GB RAM DDR3-1333
ATI Radeon HD4870
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum