Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Server ist nicht (mehr) erreichbar
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
scheffe2804
n00b
n00b


Joined: 03 Feb 2011
Posts: 2

PostPosted: Thu Feb 03, 2011 2:09 pm    Post subject: Server ist nicht (mehr) erreichbar Reply with quote

Hallo
und schonmal danke fürs Lesen.

Ich habe auf einem Strato Root Server gentoo installiert und der Server lief ohne Neustart mehrere Wochen.
Bin heute nacht.
Ich habe einen Neustart versucht. Der Server antwortet aber nicht auf einen ping.
Über die Rettungsconsole per chroot habe ich einen Fehler gesucht, aber keinen gefunden.

Ich habe noch drei Ausgaben angefügt die vielleicht helfen.
/etc/conf.d/net
/var/log/messages
Die Ausgabe von dmesg.
ifconfig im chroot

Code:
(chroot) / # ifconfig
eth0 Link encap:Ethernet HWaddr 00:21:85:fa:8f:d2
inet addr:85.214.217.225 Bcast:85.214.217.225 Mask:255.255.255.255
inet6 addr: fe80::221:85ff:fefa:8fd2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3381 errors:0 dropped:0 overruns:0 frame:0
TX packets:1276 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:392081 (382.8 KiB) TX bytes:247690 (241.8 KiB)
Memory:feae0000-feb00000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
-----------------------------
(chroot) h1824151 / # rc-config list default
Init scripts to be started by runlevel default
apache2
denyhosts
local
mysql
net.eth0
netmount
sshd
syslog-ng
udev-postmount
vixie-cron
----------------------------------

Wahrscheinlich ein total blödsinniger Fehler.
Wär nett, wenn sich das mal jemand anschaut.
Wenn noch Informationen erforderlich sind um das einfacher zu machen, leifere ich die gerne nach.

Gruß
Chris

messages
die vom gentoo chroot:

Code:
Feb  3 13:00:49 v0o kernel: device-mapper: uevent: version 1.0.3
Feb  3 13:00:49 v0o kernel: device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
Feb  3 13:00:49 v0o kernel: md: raid10 personality registered for level 10
Feb  3 13:00:49 v0o kernel: JFS: nTxBlock = 8192, nTxLock = 65536
Feb  3 13:00:49 v0o kernel: RPC: Registered udp transport module.
Feb  3 13:00:49 v0o kernel: RPC: Registered tcp transport module.
Feb  3 13:00:49 v0o kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Feb  3 13:00:49 v0o kernel: SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Feb  3 13:00:49 v0o kernel: SGI XFS Quota Management subsystem
Feb  3 13:00:49 v0o kernel: fuse init (API version 7.13)
Feb  3 13:00:49 v0o kernel: Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Feb  3 13:00:49 v0o kernel: Copyright (c) 1999-2006 Intel Corporation.
Feb  3 13:00:49 v0o kernel: EXT3-fs (sda3): recovery required on readonly filesystem
Feb  3 13:00:49 v0o kernel: EXT3-fs (sda3): write access will be enabled during recovery
Feb  3 13:00:49 v0o kernel: kjournald starting.  Commit interval 5 seconds
Feb  3 13:00:49 v0o kernel: EXT3-fs (sda3): recovery complete
Feb  3 13:00:49 v0o kernel: EXT3-fs (sda3): mounted filesystem with writeback data mode
Feb  3 13:00:49 v0o kernel: udev: starting version 151
Feb  3 13:00:49 v0o kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Feb  3 13:00:49 v0o kernel: ACPI: Power Button [PWRB]
Feb  3 13:00:49 v0o kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Feb  3 13:00:49 v0o kernel: ACPI: Power Button [PWRF]
Feb  3 13:00:49 v0o kernel: rtc_cmos 00:02: RTC can wake from S4
Feb  3 13:00:49 v0o kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Feb  3 13:00:49 v0o kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Feb  3 13:00:49 v0o kernel: ACPI: duty_cycle spans bit 4
Feb  3 13:00:49 v0o kernel: k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
Feb  3 13:00:49 v0o kernel: input: PC Speaker as /devices/platform/pcspkr/input/input2
Feb  3 13:00:49 v0o kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Feb  3 13:00:49 v0o kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb  3 13:00:49 v0o kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb  3 13:00:49 v0o kernel: Linux agpgart interface v0.103
Feb  3 13:00:49 v0o kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
Feb  3 13:00:49 v0o kernel: e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
Feb  3 13:00:49 v0o kernel: e1000e 0000:02:00.0: Disabling ASPM  L1
Feb  3 13:00:49 v0o kernel: e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb  3 13:00:49 v0o kernel: e1000e 0000:02:00.0: setting latency timer to 64
Feb  3 13:00:49 v0o kernel: e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
Feb  3 13:00:49 v0o kernel: e1000e 0000:02:00.0: Disabling ASPM L0s
Feb  3 13:00:49 v0o kernel: 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:85:fa:8f:d2
Feb  3 13:00:49 v0o kernel: 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
Feb  3 13:00:49 v0o kernel: 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
Feb  3 13:00:49 v0o kernel: e1000e 0000:03:00.0: Disabling ASPM  L1
Feb  3 13:00:49 v0o kernel: e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Feb  3 13:00:49 v0o kernel: e1000e 0000:03:00.0: setting latency timer to 64
Feb  3 13:00:49 v0o kernel: e1000e 0000:03:00.0: irq 27 for MSI/MSI-X
Feb  3 13:00:49 v0o kernel: e1000e 0000:03:00.0: Disabling ASPM L0s
Feb  3 13:00:49 v0o kernel: 0000:03:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:21:85:fa:8f:d3
Feb  3 13:00:49 v0o kernel: 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
Feb  3 13:00:49 v0o kernel: 0000:03:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
Feb  3 13:00:49 v0o kernel: EXT3-fs (sda3): using internal journal
Feb  3 13:00:49 v0o kernel: kjournald starting.  Commit interval 5 seconds
Feb  3 13:00:49 v0o kernel: EXT3-fs (sdb1): using internal journal
Feb  3 13:00:49 v0o kernel: EXT3-fs (sdb1): mounted filesystem with writeback data mode
Feb  3 13:00:49 v0o kernel: Adding 1060284k swap on /dev/sda2.  Priority:-1 extents:1 across:1060284k
Feb  3 13:00:50 v0o kernel: e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
Feb  3 13:00:50 v0o kernel: e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
Feb  3 13:00:50 v0o rc-scripts: Configuration not set for eth0 - assuming DHCP
Feb  3 13:00:51 v0o kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Feb  3 13:00:51 v0o kernel: 0000:02:00.0: eth0: 10/100 speed: disabling TSO
Feb  3 13:00:52 v0o dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Feb  3 13:00:53 v0o dhclient: DHCPACK from 85.214.1.25
Feb  3 13:00:53 v0o dhclient: bound to 85.214.217.225 -- renewal in 40850 seconds.
Feb  3 13:00:53 v0o rc-scripts: Strange, the socket file already exist in "/var/run/mysqld/mysqld.sock"
Feb  3 13:00:53 v0o rc-scripts: it will be removed now and re-created by the MySQL server
Feb  3 13:00:53 v0o rc-scripts: BUT please make your checks.
Feb  3 13:00:56 v0o kernel: NET: Registered protocol family 10
Feb  3 13:00:56 v0o kernel: lo: Disabled Privacy Extensions
Feb  3 13:00:56 v0o sshd[11134]: Server listening on 0.0.0.0 port 22.
Feb  3 13:00:56 v0o sshd[11134]: Server listening on :: port 22.
Feb  3 13:01:10 v0o cron[11396]: (CRON) STARTUP (V5.0)
Feb  3 13:10:01 v0o cron[11470]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )


dmesg
Code:

reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 00000000ddfb0000 - 00000000dfffffff
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [io  0x04d0-0x04d1] has been reserved
system 00:09: [io  0x040b] has been reserved
system 00:09: [io  0x04d6] has been reserved
system 00:09: [io  0x0c00-0x0c01] has been reserved
system 00:09: [io  0x0c14] has been reserved
system 00:09: [io  0x0c50-0x0c51] has been reserved
system 00:09: [io  0x0c52] has been reserved
system 00:09: [io  0x0c6c] has been reserved
system 00:09: [io  0x0c6f] has been reserved
system 00:09: [io  0x0cd0-0x0cd1] has been reserved
system 00:09: [io  0x0cd2-0x0cd3] has been reserved
system 00:09: [io  0x0cd4-0x0cd5] has been reserved
system 00:09: [io  0x0cd6-0x0cd7] has been reserved
system 00:09: [io  0x0cd8-0x0cdf] has been reserved
system 00:09: [io  0x0800-0x089f] has been reserved
system 00:09: [io  0x0b10-0x0b1f] has been reserved
system 00:09: [io  0x0900-0x090f] has been reserved
system 00:09: [io  0x0910-0x091f] has been reserved
system 00:09: [io  0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0b: [io  0x0a00-0x0a0f] has been reserved
system 00:0b: [io  0x0a10-0x0a1f] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xddffffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:04.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:05.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:05.0:   bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4:   bridge window [io  disabled]
pci 0000:00:14.4:   bridge window [mem disabled]
pci 0000:00:14.4:   bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xde000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xde000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 41400k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
HugeTLB registered 2 MB page size, pre-allocated 0 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.13)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with security attributes, large block/inode numbers, no debug enabled
aufs 2-standalone.tree-34-20100621
msgmni has been set to 7866
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: duty_cycle spans bit 4
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
drbd: initialized. Version: 8.3.7 (api:88/proto:86-92)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xffff88011fb56bc0
3ware Storage Controller device driver for Linux v1.26.02.002.
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 22
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
e1000e 0000:02:00.0: Disabling ASPM L0s
0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:85:fa:8f:d2
0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:03:00.0: setting latency timer to 64
e1000e 0000:03:00.0: irq 27 for MSI/MSI-X
e1000e 0000:03:00.0: Disabling ASPM L0s
0000:03:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:21:85:fa:8f:d3
0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:03:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
i2c /dev entries driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
w83627ehf: Found W83627DHG chip at 0xa10
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 1214 HE processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xe (2200 MHz), vid 0xe
powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x10
powernow-k8:    2 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
Freeing unused kernel memory: 636k freed
aufs test_add:252:busybox[1113]: uid/gid/perm /squash 0/0/0755, 0/0/01777
Clocksource tsc unstable (delta = -184926607 ns)
e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:02:00.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): using internal journal
ext3_orphan_cleanup: deleting unreferenced inode 6086665
ext3_orphan_cleanup: deleting unreferenced inode 6086664
ext3_orphan_cleanup: deleting unreferenced inode 6086663
ext3_orphan_cleanup: deleting unreferenced inode 6086662
ext3_orphan_cleanup: deleting unreferenced inode 6086660
EXT3-fs (sda3): 5 orphan inodes deleted
EXT3-fs (sda3): recovery complete
EXT3-fs (sda3): mounted filesystem with writeback data mode


conf.d/net

Code:
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d.  To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!)..
config_eth0=( "85.214.217.225  netmask 255.255.255.255 brd 85.214.217.255" )
routes_eth0=( "85.214.217.1"  "default via 85.214.217.1" )

#config_eth0=( "dhcp" )
[/quote]


Sowie route-n des Rescue Systems in dem ich jetzt bin :

Code:
(chroot) h1824151 / # route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
85.214.192.1    0.0.0.0         255.255.255.255 UH    0      0        0 eth0
0.0.0.0         85.214.192.1    0.0.0.0         UG    0      0        0 eth0


Die Netmask stimmt , die sieht bei allen Strato Servern so aus.
Back to top
View user's profile Send private message
Necoro
Veteran
Veteran


Joined: 18 Dec 2005
Posts: 1912
Location: München (Germany)

PostPosted: Thu Feb 03, 2011 3:46 pm    Post subject: Reply with quote

Die Netmask ist wirklich 255.255.255.255 ? 254 hinten würde in meinen Augen gerade noch Sinn machen, aber 255 sieht unsinnig aus. Aber naja - bin auch kein Netzwerktechniker :)
_________________
Inter Deum Et Diabolum Semper Musica Est.
Back to top
View user's profile Send private message
scheffe2804
n00b
n00b


Joined: 03 Feb 2011
Posts: 2

PostPosted: Thu Feb 03, 2011 4:23 pm    Post subject: Reply with quote

Necoro wrote:
Die Netmask ist wirklich 255.255.255.255 ? 254 hinten würde in meinen Augen gerade noch Sinn machen, aber 255 sieht unsinnig aus. Aber naja - bin auch kein Netzwerktechniker :)


Das ist route -n, wenn ich im rescue Modus boote:

Code:
(chroot) h1824151 / # route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
85.214.192.1    0.0.0.0         255.255.255.255 UH    0      0        0 eth0
0.0.0.0         85.214.192.1    0.0.0.0         UG    0      0        0 eth0
Back to top
View user's profile Send private message
Hollowman
Guru
Guru


Joined: 19 Apr 2007
Posts: 584

PostPosted: Thu Feb 03, 2011 4:53 pm    Post subject: Reply with quote

Hi

die 255.255.255.255 passt schon, das ist ja das Internet interface. Zu Hause wäre das quasi ppp0.

Code:
X.X.X.X   0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
0.0.0.0         X.X.X.X   0.0.0.0         UG    0      0        0 ppp0


Außerdem bringt die Route aus dem chroot nix. Das sind die Routen von dem Rescue Ding und das geht ja.

Mittlerweile geht er wieder oder ist das dass Rescue System?

Code:

 $ ping 85.214.217.225
PING 85.214.217.225 (85.214.217.225) 56(84) bytes of data.
64 bytes from 85.214.217.225: icmp_req=1 ttl=56 time=20.3 ms
64 bytes from 85.214.217.225: icmp_req=2 ttl=56 time=20.9 ms
64 bytes from 85.214.217.225: icmp_req=3 ttl=56 time=19.3 ms
64 bytes from 85.214.217.225: icmp_req=4 ttl=56 time=19.4 ms
64 bytes from 85.214.217.225: icmp_req=5 ttl=56 time=20.5 ms
^C^C
--- 85.214.217.225 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4004ms
rtt min/avg/max/mdev = 19.368/20.135/20.959/0.636 ms
eimer@Laptops ~ $ nmap 85.214.217.225

Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-03 17:51 CET
Nmap scan report for h1824151.stratoserver.net (85.214.217.225)
Host is up (0.066s latency).
Not shown: 997 closed ports
PORT    STATE SERVICE
22/tcp  open  ssh
80/tcp  open  http
443/tcp open  https

Nmap done: 1 IP address (1 host up) scanned in 3.69 seconds


Was hast du als letztes auf der Kiste gemacht bzw geändert?

Er muss auf jeden Fall einmal unsauber runter gefahren sein, sonst würde das mysql net meckern.

Sebastian
Back to top
View user's profile Send private message
Rene-dev
Apprentice
Apprentice


Joined: 22 Jan 2005
Posts: 163
Location: Münster, Germany

PostPosted: Fri Feb 04, 2011 7:45 pm    Post subject: Reply with quote

hmm, das teil scheint ja zu booten.
hast du die serielle konsole am laufen? wenn nicht richte die mal ein, einfach in
/etc/inittab
die zeile
Code:
s0:12345:respawn:/sbin/agetty 57600 ttyS0 vt100

eintragen.
dann auf die console connecten, enter druecken, und hochfahren.
Das gleiche geht uebrigens auch mit dem grub:
in /etc/grub/menu.lst
Code:
serial --unit=0 --speed=57600 --word=8 --parity=no --stop=1
terminal serial


Rene
Back to top
View user's profile Send private message
cryptosteve
Veteran
Veteran


Joined: 04 Jan 2004
Posts: 1169
Location: Buchholz/GER

PostPosted: Sun Feb 06, 2011 6:34 am    Post subject: Reply with quote

scheffe2804, wie ist der Stand der Dinge, hast Du die Möhre wieder ans Netz bekommen?
_________________
- born to create drama -
cryptosteve - gpg: 0x9B6C7E15
CS Virtual Travel Bug: VF6G5D
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum