Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[gelöst] KDE-Installation bricht ab
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message

Joined: 11 Apr 2011
Posts: 45
Location: Duisburg

PostPosted: Fri Apr 22, 2011 5:36 am    Post subject: [gelöst] KDE-Installation bricht ab Reply with quote

wollte nun endlich mal KDE installieren, aber das läuft natürlich auch nicht ohne Probleme. Habe zu der Fehlermeldung bereits einen Thread hier im Forum gefunden, dort ist das Problem leider nicht gelöst.


 * Package: kde-base/system-config-printer-kde-4.6.2
 * Repository: gentoo
 * Maintainer:
 * USE: elibc_glibc kernel_linux userland_GNU x86
 * FEATURES: sandbox
>>> Unpacking source...
* Unpacking parts of kdeadmin-4.6.2.tar.bz2 to /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work ...
tar extract command failed at least partially - continuing anyway
 [ ok ]
>>> Source unpacked in /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work
>>> Preparing source in /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2 ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2 ...
>>> Working in BUILD_DIR: "/var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2_build"
cmake --no-warn-unused-cli -C /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/temp/gentoo_common_config.cmake -DCMAKE_INSTALL_PREFIX=/usr -DKDE4_BUILD_TESTS=OFF -DCMAKE_INSTALL_PREFIX=/usr -DSYSCONF_INSTALL_DIR=/etc -DCMAKE_BUILD_TYPE=Gentoo -DCMAKE_INSTALL_DO_STRIP=OFF -DCMAKE_USER_MAKE_RULES_OVERRIDE=/var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/temp/gentoo_rules.cmake /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2
Not searching for unused variables given on the command line.
loading initial cache file /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/temp/gentoo_common_config.cmake
-- The C compiler identification is GNU
-- The CXX compiler identification is GNU
-- Check for working C compiler: /usr/bin/i686-pc-linux-gnu-gcc
-- Check for working C compiler: /usr/bin/i686-pc-linux-gnu-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/i686-pc-linux-gnu-g++
-- Check for working CXX compiler: /usr/bin/i686-pc-linux-gnu-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found.
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found.
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - not found.
-- Found Qt-Version 4.7.2 (using /usr/bin/qmake)
-- Looking for XOpenDisplay in /usr/lib/;/usr/lib/;/usr/lib/;/usr/lib/;/usr/lib/;/usr/lib/
-- Looking for XOpenDisplay in /usr/lib/;/usr/lib/;/usr/lib/;/usr/lib/;/usr/lib/;/usr/lib/ - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib/
-- Looking for include files CMAKE_HAVE_PTHREAD_H
-- Looking for include files CMAKE_HAVE_PTHREAD_H - found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Looking for _POSIX_TIMERS
-- Looking for _POSIX_TIMERS - found
-- Found Automoc4: /usr/bin/automoc4
-- Found Perl: /usr/bin/perl
-- Found Phonon: /usr/include
-- Performing Test _OFFT_IS_64BIT
-- Performing Test _OFFT_IS_64BIT - Failed
-- Performing Test HAVE_FPIE_SUPPORT
-- Performing Test HAVE_FPIE_SUPPORT - Success
-- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL - Success
-- Performing Test __KDE_HAVE_GCC_VISIBILITY
-- Performing Test __KDE_HAVE_GCC_VISIBILITY - Success
-- Found KDE 4.6 include dir: /usr/include
-- Found KDE 4.6 library dir: /usr/lib
-- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler
-- Found automoc4: /usr/bin/automoc4
-- Found PythonInterp: /usr/bin/python
-- Found Python executable: /usr/bin/python
-- Found Python version: 2.7.1
-- Found Python library: /usr/lib/
-- Found SIP version: 4.12.1
-- Found PyQt4 version: 4.8.3
Traceback (most recent call last):
File "/usr/share/apps/cmake/modules/", line 8, in <module>
import PyKDE4.pykdeconfig
ImportError: No module named PyKDE4.pykdeconfig
-- Found PyCups
-- Found System Config Printer

-- The following OPTIONAL packages could NOT be located on your system.
-- Consider installing them to enable more features from this software.
* PyKDE4 <>
PyKDE4 was not found. It is needed by system-config-printer-kde to run. (Use -DINSTALL_SYSTEM_CONFIG_PRINTER=TRUE to install anyway)


-- <<< Gentoo configuration >>>
Build type Gentoo
Install path /usr
Compiler flags:
C -O2 -march=i686 -pipe -Wno-long-long -std=iso9899:1990 -Wundef -Wcast-align -Werror-implicit-function-declaration -Wchar-subscripts -Wall -W -Wpointer-arith -Wwrite-strings -Wformat-security -Wmissing-format-attribute -fno-common
C++ -O2 -march=i686 -pipe -Wnon-virtual-dtor -Wno-long-long -ansi -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -Wformat-security -fno-exceptions -DQT_NO_EXCEPTIONS -fno-check-new -fno-common -Werror=return-type -Woverloaded-virtual -fno-threadsafe-statics -fvisibility=hidden -fvisibility-inlines-hidden
Linker flags:
Executable -Wl,--enable-new-dtags -Wl,-O1 -Wl,--as-needed
Module -Wl,--enable-new-dtags -Wl,--fatal-warnings -Wl,--no-undefined -lc -Wl,-O1 -Wl,--as-needed
Shared -Wl,--enable-new-dtags -Wl,--fatal-warnings -Wl,--no-undefined -lc -Wl,-O1 -Wl,--as-needed

-- Configuring done
-- Generating done
-- Build files have been written to: /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2_build
>>> Source configured.
>>> Compiling source in /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2 ...
>>> Working in BUILD_DIR: "/var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2_build"
make -j2
>>> Source compiled.
>>> Test phase [not enabled]: kde-base/system-config-printer-kde-4.6.2

>>> Install system-config-printer-kde-4.6.2 into /var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/image/ category kde-base
>>> Working in BUILD_DIR: "/var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2_build"
make -j2 DESTDIR=/var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/image/ install
make: *** No rule to make target `install'. Stop.
emake failed
* ERROR: kde-base/system-config-printer-kde-4.6.2 failed (install phase):
* died running make install, base_src_install
* Call stack:
*, line 56: Called src_install
* environment, line 6762: Called kde4-meta_src_install
* environment, line 4205: Called kde4-base_src_install
* environment, line 3810: Called cmake-utils_src_install
* environment, line 1899: Called _execute_optionaly 'src_install'
* environment, line 848: Called enable_cmake-utils_src_install
* environment, line 2223: Called base_src_install
* environment, line 1550: Called die
* The specific snippet of code:
* emake DESTDIR="${D}" "$@" install || die "died running make install, $FUNCNAME";
* If you need support, post the output of 'emerge --info =kde-base/system-config-printer-kde-4.6.2',
* the complete build log and the output of 'emerge -pqv =kde-base/system-config-printer-kde-4.6.2'.
* The complete build log is located at '/home/.Port_Logdir/kde-base:system-config-printer-kde-4.6.2:20110421-051959.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/temp/environment'.
* S: '/var/tmp/portage/kde-base/system-config-printer-kde-4.6.2/work/system-config-printer-kde-4.6.2'

emerge --info =kde-base/system-config-printer-kde-4.6.2

app-shells/bash: 4.2_p8
dev-lang/python: 2.7.1-r1, 3.1.3-r1
dev-util/cmake: 2.8.4
sys-apps/baselayout: 2.0.2
sys-apps/openrc: 0.8.1
sys-apps/sandbox: 2.5
sys-devel/autoconf: 2.68
sys-devel/automake: 1.11.1-r1
sys-devel/binutils: 2.21
sys-devel/gcc: 4.5.2
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.4-r1
sys-devel/make: 3.82
sys-kernel/linux-headers: 2.6.38
virtual/os-headers: 0
CFLAGS="-O2 -march=i686 -pipe"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
Portage (default/linux/x86/10.0/desktop, gcc-4.5.2, glibc-2.13-r2, 2.6.38-gentoo-r1 i686)
System Settings
System uname: Linux-2.6.38-gentoo-r1-i686-AMD_Athlon-tm-_Processor-with-gentoo-2.0.2
Timestamp of tree: Fri, 15 Apr 2011 12:45:01 +0000
USE="X X86 a52 aac acl acpi alsa apm arts avi bitmap-fonts bluetooth branding bzip2 cairo cdr cli consolekit cracklib crypt cups cxx dbus declarative dri dts dvd dvdr emboss encode exif f77 fam firefox flac foomaticdb fortran gbdm gdbm gdu gif gpm gtk iconv imlib ipv6 jpeg kde lcms ldap libg++ libnotify libwww mad mikmod mng modules motif mp3 mp4 mpeg mudflap ncurses nls nptl nptlonly ogg oggvorbis opengl openmp oss pam pango pcre pdf pdflib perl png policykit ppds pppd python qt qt3 qt3support qt4 quicktime readline sdl session spell sql ssl startup-notification svg svga sysfs tcpd tiff truetype udev unicode usb vorbis webkit x264 x86 xcb xm12 xml xmms xorg xulrunner xv xvid xy zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"

emerge -pqv =kde-base/system-config-printer-kde-4.6.2

[ebuild N ] kde-base/system-config-printer-kde-4.6.2 USE="(-aqua) (-kdeenablefinal) (-kdeprefix)"

* IMPORTANT: 4 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.


Last edited by Todie77 on Mon Apr 25, 2011 7:29 am; edited 1 time in total
Back to top
View user's profile Send private message

Joined: 29 Mar 2005
Posts: 4535

PostPosted: Fri Apr 22, 2011 6:01 am    Post subject: Reply with quote

Zeig uns mal
eselect python list

pykde4 ist definitiv installiert, ist eine Abhängigkeit von system-config-printer-kde.
Die Meldung "ImportError: No module named PyKDE4.pykdeconfig" sagt mir, dass wohl das PyKDE4-Modul der verwendeten python-Version nicht gefunden werden kann.

Wenn eselect python list keinen Eintrag mit einem "*" dahinter hat, wählst du mit
eselect python set [nummer]

eine python-Version aus. Kürzlich gabs ein Update auf python:2.7, setze am besten das. Die :3.1 solltest du nicht nehmen, da viele Pakete noch nicht nach python3 portiert wurden.

Nach dem Setzen solltest du python-updater laufen lassen, um alle installierten python-Module für die neu gesetzte Python-Version zu installieren. Danach sollte system-confg-printer-kde durchlaufen.

Viel Erfolg
Back to top
View user's profile Send private message

Joined: 11 Apr 2011
Posts: 45
Location: Duisburg

PostPosted: Mon Apr 25, 2011 7:30 am    Post subject: Reply with quote

Danke, hat funktioniert.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum