Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Welche Kerneloptionen auswählen
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
genius0815
n00b
n00b


Joined: 27 Jan 2012
Posts: 1

PostPosted: Fri Jan 27, 2012 7:05 am    Post subject: Welche Kerneloptionen auswählen Reply with quote

Hallo,

ich kriege beim Booten auch den Kernel Panic Error , dass root nicht gemountet werden kann. Ich habe mal lspci -k ausgeführt und würde gern wissen, welche Parameter auf Yes gesetzt werden müssen, damit 1. der Kernel bootet und 2. die Grafikkarte funktioniert.

Code:


00:00.0 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset) (rev 32)
00:00.1 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
00:04.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage XL (rev 27)
   Subsystem: Fujitsu Technology Solutions PRIMERGY RX/TX series onboard VGA
00:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
   Subsystem: Fujitsu Technology Solutions Device 1013
   Kernel driver in use: tg3
   Kernel modules: tg3
00:08.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200 PRO] (rev 01)
   Subsystem: PC Partner Limited Device 0250
00:08.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
   Subsystem: PC Partner Limited Device 0251
00:0f.0 Host bridge: Broadcom CSB6 South Bridge (rev a0)
   Subsystem: Fujitsu Technology Solutions PRIMERGY RX/TX series
00:0f.1 IDE interface: Broadcom CSB6 RAID/IDE Controller (rev a0)
   Subsystem: Fujitsu Technology Solutions PRIMERGY RX/TX series onboard IDE
   Kernel driver in use: pata_serverworks
   Kernel modules: pata_serverworks
00:0f.2 USB controller: Broadcom CSB6 OHCI USB Controller (rev 05)
   Subsystem: Fujitsu Technology Solutions PRIMERGY RX/TX series onboard OHCI
   Kernel driver in use: ohci_hcd
   Kernel modules: ohci-hcd
00:0f.3 ISA bridge: Broadcom GCLE-2 Host Bridge
   Subsystem: Fujitsu Technology Solutions PRIMERGY RX/TX series
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
01:08.0 RAID bus controller: Adaptec (formerly DPT) SmartRAID V Controller (rev 01)
   Subsystem: Adaptec (formerly DPT) ASR-2010S I2O Zero Channel
   Kernel modules: i2o_core, dpt_i2o
02:09.0 PCI bridge: Intel Corporation 21154 PCI-to-PCI Bridge
03:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0d)
   Subsystem: Intel Corporation EtherExpress PRO/100 S Dual Port Server Adapter
   Kernel driver in use: e100
   Kernel modules: e100
03:05.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0d)
   Subsystem: Intel Corporation EtherExpress PRO/100 S Dual Port Server Adapter
   Kernel driver in use: e100
   Kernel modules: e100


Vielen Dank,
genius0815[/glep][/list]
Back to top
View user's profile Send private message
tomk
Bodhisattva
Bodhisattva


Joined: 23 Sep 2003
Posts: 7221
Location: Sat in front of my computer

PostPosted: Fri Jan 27, 2012 9:36 am    Post subject: Reply with quote

Split from Unable to mount root fs on unknown-block 2,0 and moved to Deutsches Forum (German).
_________________
Search | Read | Answer | Report | Strip
Back to top
View user's profile Send private message
Josef.95
Advocate
Advocate


Joined: 03 Sep 2007
Posts: 3629
Location: Germany

PostPosted: Fri Jan 27, 2012 10:02 am    Post subject: Reply with quote

Hallo

Schau mal ob dir Kernelmodule finden zunächst weiterhilft.
Und zur Einrichtung von Xorg nutze zb das X Server Configuration HOWTO
Für die Radeon 9200 Grafikkarte nutze am besten den radeon (xf86-video-ati) Treiber.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum