Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[gelöst] Jetzt will vdr gar nicht mehr.
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Wed May 02, 2012 7:26 pm    Post subject: [gelöst] Jetzt will vdr gar nicht mehr. Reply with quote

Irgendwie macht mich das Teil noch wahnsinnig, aber ich finde es einfach genial, kann nicht mehr ohne.

Aber jetzt lässt es sich gar nicht mehr starten. Es gibt:
    /etc/init.d/vdr start
    vdr | * Preparing start of vdr:
    vdr | * Waiting for DVB devices ... [ ok ]
    vdr | * Checking config files ... [ ok ]
    vdr | * Starting vdr ... [ ok ]
    vdr | * Waiting for working vdr ...
    vdr | * VDR process died, please check logfile [ !! ]
    vdr |/usr/bin/vdr: Kein Prozess gefunden
    vdr | * ERROR: vdr failed to start
messages gibt folgendes:
    May 2 21:17:59 airwolf vdr: [2900] VDR version 1.6.0-2 started
    May 2 21:17:59 airwolf vdr: [2900] switched to user 'vdr'
    May 2 21:17:59 airwolf vdr: [2900] running as daemon (tid=2900)
    May 2 21:17:59 airwolf vdr: [2900] codeset is 'UTF-8' - known
    May 2 21:17:59 airwolf vdr: [2900] found 1 locales in /usr/share/locale
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'slv,slo'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'ita'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'dut,nla,nld'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'por'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'fra,fre'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'nor'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'fin,suo'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'pol'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'esl,spa'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'ell,gre'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'sve,swe'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'rom,rum'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'hun'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'cat,cln'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'rus'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'hrv'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'est'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'dan'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'cze,ces'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'tur'
    May 2 21:17:59 airwolf vdr: [2900] no locale for language code 'ukr'
    May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-osdteletext.so.1.6.0
    May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-reelchannelscan.so.1.6.0
    May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-remote.so.1.6.0
    May 2 21:17:59 airwolf vdr: [2900] loading plugin: /usr/lib64/vdr/plugins/libvdr-xineliboutput.so.1.6.0
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/sources.conf
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/diseqc.conf
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/channels.conf
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/commands.conf
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/reccmds.conf
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/svdrphosts.conf
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/remote.conf
    May 2 21:17:59 airwolf vdr: [2900] loading /etc/vdr/keymacros.conf
    May 2 21:17:59 airwolf /etc/init.d/vdr[2816]: ERROR: vdr failed to start
dmesg ist auch sauber
    [ 5.099180] saa7130/34: v4l2 driver version 0, 2, 17 loaded
    [ 5.099366] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 23, latency: 64, mmio: 0xfebff800
    [ 5.099383] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
    [ 5.099437] saa7133[0]: board init: gpio is 6400000
    [ 5.240106] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
    [ 5.240112] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
    [ 5.240116] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
    [ 5.240121] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    [ 5.240125] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
    [ 5.240129] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 5.240133] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 5.240137] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 5.240141] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 a5 ff 0d f0 73 05 29 00
    [ 5.240146] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
    [ 5.240150] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
    [ 5.240154] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 8d 00 00 00 00 00 00 00 00 00
    [ 5.240158] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 5.240162] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 5.240166] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 5.240171] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [ 5.240197] tveeprom 6-0050: Hauppauge model 67019, rev B4B4, serial# 917413
    [ 5.240199] tveeprom 6-0050: MAC address is 00:0d:fe:0d:ff:a5
    [ 5.240201] tveeprom 6-0050: tuner model is Philips 8275A (idx 114, type 4)
    [ 5.240203] tveeprom 6-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
    [ 5.240206] tveeprom 6-0050: audio processor is SAA7131 (idx 41)
    [ 5.240207] tveeprom 6-0050: decoder processor is SAA7131 (idx 35)
    [ 5.240209] tveeprom 6-0050: has radio, has IR receiver, has IR transmitter
    [ 5.240211] saa7133[0]: hauppauge eeprom: model=67019
    [ 5.511539] i2c-core: driver [tuner] using legacy suspend method
    [ 5.511547] i2c-core: driver [tuner] using legacy resume method
    [ 5.562669] tuner 6-004b: Tuner -1 found with type(s) Radio TV.
    [ 5.601029] tda829x 6-004b: setting tuner address to 61
    [ 5.730152] tda829x 6-004b: type set to tda8290+75a
    [ 8.730139] IR keymap rc-hauppauge not found
    [ 8.730148] Registered IR keymap rc-empty
    [ 8.730294] input: i2c IR (HVR 1110) as /devices/virtual/rc/rc0/input14
    [ 8.730401] rc0: i2c IR (HVR 1110) as /devices/virtual/rc/rc0
    [ 8.730407] ir-kbd-i2c: i2c IR (HVR 1110) detected at i2c-6/6-0071/ir0 [saa7133[0]]
    [ 8.764262] saa7133[0]: registered device video0 [v4l2]
    [ 8.764360] saa7133[0]: registered device vbi0
    [ 8.764427] saa7133[0]: registered device radio0
    [ 8.795430] dvb_init() allocating 1 frontend
    [ 8.832142] DVB: registering new adapter (saa7133[0])
    [ 8.832152] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
    [ 8.884162] tda1004x: setting up plls for 48MHz sampling clock
    [ 9.065149] tda1004x: found firmware revision 20 -- ok
Hat jemand eine Idee? Und eins noch, mit Kaffeine geht alles prima.


Last edited by Klaus Meier on Thu May 03, 2012 6:10 am; edited 1 time in total
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Thu May 03, 2012 1:24 am    Post subject: Reply with quote

Falls neulich fontconfig auf 2.9.0 aktualisiert wurde (qlop -lu fontconfig), versuch mal ein downgrade auf 2.8.0-r2.
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Thu May 03, 2012 6:12 am    Post subject: Reply with quote

Das wars... oh mein Gott, was ist das denn? Wer soll denn auf so was kommen? Danke!
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Sun May 06, 2012 10:31 pm    Post subject: Reply with quote

Das kam wenn man vdr mit fontconfig-2.9.0 direkt von der shell gestartet hat:
Code:
vdr: fcmatch.c:850: IA__FcFontSort: Assertion `result != ((void *)0)' failed.

Inzwischen durch folgenden Patch behoben:
http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/media-video/vdr/files/vdr-1.6.0_p2_fontconfig_fontsort.patch?view=markup
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum