Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
No keyboard after installation
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
Al3s
n00b
n00b


Joined: 28 Dec 2012
Posts: 2

PostPosted: Fri Dec 28, 2012 9:01 pm    Post subject: No keyboard after installation Reply with quote

Hi and first of all sorry for my poor english.

I'm new to Gentoo and i'm trying to install it compiling my own kernel. I'm configuring it starting from a config file i've taken from http://kernel-seeds.org
So far i've been able to compile the kernel but when i reboot the system the keyboard doesn't work at all, so i'm stuck at login. My kb is a "Logitech Media Keyboard 600"

This is my .config http://bpaste.net/show/66966/

My lspci:
Code:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4)
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: ATI Technologies Inc Device 6819
01:00.1 Audio device: ATI Technologies Inc Device aab0
02:00.0 Audio device: Creative Labs X-Fi Titanium series [EMU20k2] (rev 04)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)



When i write this:
Code:
find /lib/modules/<kernel version>/ -type f -iname '*.o' -or -iname '*.ko' | less

I get this:
Code:
/lib/modules/3.5.7-gentoo/kernel/fs/nls/nls_cp850.ko
/lib/modules/3.5.7-gentoo/kernel/fs/fuse/fuse.ko
/lib/modules/3.5.7-gentoo/kernel/lib/crc16.ko
/lib/modules/3.5.7-gentoo/kernel/lib/crc8.ko
/lib/modules/3.5.7-gentoo/kernel/lib/cordic.ko
/lib/modules/3.5.7-gentoo/kernel/lib/crc-ccitt.ko
/lib/modules/3.5.7-gentoo/kernel/lib/crc7.ko
/lib/modules/3.5.7-gentoo/kernel/lib/libcrc32c.ko
/lib/modules/3.5.7-gentoo/kernel/net/netfilter/xt_LOG.ko
/lib/modules/3.5.7-gentoo/kernel/net/netfilter/xt_mark.ko
/lib/modules/3.5.7-gentoo/kernel/sound/core/snd.ko
/lib/modules/3.5.7-gentoo/kernel/sound/core/snd-page-alloc.ko
/lib/modules/3.5.7-gentoo/kernel/sound/core/snd-pcm.ko
/lib/modules/3.5.7-gentoo/kernel/sound/core/snd-timer.ko
/lib/modules/3.5.7-gentoo/kernel/sound/pci/ctxfi/snd-ctxfi.ko
/lib/modules/3.5.7-gentoo/kernel/drivers/firmware/dmi-sysfs.ko
/lib/modules/3.5.7-gentoo/kernel/drivers/net/ethernet/realtek/r8169.ko
/lib/modules/3.5.7-gentoo/kernel/drivers/net/mii.ko
/lib/modules/3.5.7-gentoo/kernel/drivers/scsi/scsi_wait_scan.ko
/lib/modules/3.5.7-gentoo/kernel/drivers/hwmon/k10temp.ko
/lib/modules/3.5.7-gentoo/kernel/drivers/i2c/busses/i2c-piix4.ko


and this is what i have in my /etc/conf.d/modules
Code:
modules_3_5_7="dmi-sysfs mii scsi_wait_scan k10temp r8169 snd-ctxfi nls_cp850 i2c-piix4"



Sure there will be wrong things with my configuration but if you can help me fix the keyboard to work i think i can figure out myself some of the other problems with some time.

Thanks in advance, guys :oops:
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43221
Location: 56N 3W

PostPosted: Fri Dec 28, 2012 9:14 pm    Post subject: Reply with quote

Al3s,

Welcome to Gentoo.

You are very very close with your kernel. From your .config file:-
Code:
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_CHIPIDEA is not set
Intel and VIA use UHCI_HCD for USB 1 devices and the rest of the world uses USB_OHCI_HCD.

Your lspci says 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller. Notice the OHCI there.
You have selected the wrong USB 1 driver for your motherboard.

Boot some other linux, the liveCD is fine, get back into your chroot and use make menuconfig to fix your kernel.
Rebuild the kernel and reinstall it to root.

If you have a PS/2 keyboard, that will probably work, so you can use that to fix your USB 1 in the kernel.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Al3s
n00b
n00b


Joined: 28 Dec 2012
Posts: 2

PostPosted: Fri Dec 28, 2012 9:41 pm    Post subject: Reply with quote

It worked like a charm, thanks!! :D
Now i have the system set up with networking : the sky is the limit hehe.

Once again, thank you.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum