Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ATI RS880M Mob. Radeon HD4200 howto DRM / 3d [solved]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1439
Location: indiana

PostPosted: Thu Jun 26, 2014 12:15 pm    Post subject: ATI RS880M Mob. Radeon HD4200 howto DRM / 3d [solved] Reply with quote

hi there,

i am running xorg-server-1.15 with the above mentioned card. i am using "radeon" driver and i can start X. but when trying "glxinfo" it says , no dri and segfaults.

i don`t have a xorg.conf. so everything should be detected automatically ?!?

i tried DRM in kernel as modul as well as compiled into the kernel. it does not make a difference.

any suggestions on how to get drm/3d to work is very much appreciated.


thanks in advance
_________________
I do not have a Superman complex, for I am God not Superman :D


Last edited by Mgiese on Thu Jun 26, 2014 5:37 pm; edited 1 time in total
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Thu Jun 26, 2014 2:41 pm    Post subject: Reply with quote

You should have DRI even without 3D acceleration.

Please show us your dmesg and a backtrace of the segfault, if possible.
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1439
Location: indiana

PostPosted: Thu Jun 26, 2014 4:20 pm    Post subject: Reply with quote

hi,

howto backtrace the segfault ???



edit :

regarding to the information here :

http://wiki.gentoo.org/wiki/Xorg/Hardware_3D_acceleration_guide#What_is_DRI.3F

i added
Code:
Section "Device"
  Driver "radeon"
EndSection
Section "dri"
  Mode 0666
EndSection


to /etc/X11/xorg.conf.d/10-dri.conf

but after that, my xorg-server is not starting with those settings.
_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1439
Location: indiana

PostPosted: Thu Jun 26, 2014 5:04 pm    Post subject: Reply with quote

Code:
 $ glxinfo     
name of display: :0.0
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Segmentation fault

_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1439
Location: indiana

PostPosted: Thu Jun 26, 2014 5:07 pm    Post subject: Reply with quote

dmesg :

Code:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.15.1-gentoo (root@emJay) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #5 SMP Thu Jun 26 13:39:50 GMT 2014
[    0.000000] Command line: root=/dev/sda3 vga=0x3F0
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afcf0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000afcf1000-0x00000000afdcefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000afdcf000-0x00000000afecefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000afecf000-0x00000000afefefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP 625/1475, BIOS 68DVA Ver. F.09 03/04/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[    0.000000]   4 base 0000FFF40000 mask FFFFFFFF0000 write-protect
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01ec6000, 0x01ec6fff] PGTABLE
[    0.000000] BRK [0x01ec7000, 0x01ec7fff] PGTABLE
[    0.000000] BRK [0x01ec8000, 0x01ec8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xafa00000-0xafbfffff]
[    0.000000]  [mem 0xafa00000-0xafbfffff] page 2M
[    0.000000] BRK [0x01ec9000, 0x01ec9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xac000000-0xaf9fffff]
[    0.000000]  [mem 0xac000000-0xaf9fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x80000000-0xabffffff]
[    0.000000]  [mem 0x80000000-0xabffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0xafc00000-0xafcf0fff]
[    0.000000]  [mem 0xafc00000-0xafcf0fff] page 4k
[    0.000000] BRK [0x01eca000, 0x01ecafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xafeff000-0xafefffff]
[    0.000000]  [mem 0xafeff000-0xafefffff] page 4k
[    0.000000] BRK [0x01ecb000, 0x01ecbfff] PGTABLE
[    0.000000] ACPI: RSDP 0x00000000000F2A70 000014 (v00 HPQOEM)
[    0.000000] ACPI: RSDT 0x00000000AFEFE038 000038 (v01 HPQOEM SLIC-MPC 00000003      01000013)
[    0.000000] ACPI: FACP 0x00000000AFEFD000 000074 (v01 HPQOEM 307E     00000003 HP   00000001)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140214/tbfadt-634)
[    0.000000] ACPI: DSDT 0x00000000AFEDE000 01B622 (v01 HPQOEM SB700    00000001 INTL 20060912)
[    0.000000] ACPI: FACS 0x00000000AFE8F000 000040
[    0.000000] ACPI: APIC 0x00000000AFEFC000 000084 (v01 HPQOEM 307E     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x00000000AFEFB000 00003C (v01 HPQOEM 307E     00000001 HP   00000001)
[    0.000000] ACPI: HPET 0x00000000AFEDB000 000038 (v01 HPQOEM 307E     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000AFEDA000 000386 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000afefffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0xafefffff]
[    0.000000]   NODE_DATA [mem 0xafced000-0xafcf0fff]
[    0.000000]  [ffffea0000000000-ffffea0002bfffff] PMD -> [ffff8800ac800000-ffff8800af3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xafcf0fff]
[    0.000000]   node   0: [mem 0xafeff000-0xafefffff]
[    0.000000] On node 0 totalpages: 720016
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11196 pages used for memmap
[    0.000000]   DMA32 zone: 716018 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafcf1000-0xafdcefff]
[    0.000000] PM: Registered nosave memory: [mem 0xafdcf000-0xafecefff]
[    0.000000] PM: Registered nosave memory: [mem 0xafecf000-0xafefefff]
[    0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800afa00000 s79744 r8192 d22656 u524288
[    0.000000] pcpu-alloc: s79744 r8192 d22656 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 708735
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/sda3 vga=0x3F0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2819168K/2880064K available (7582K kernel code, 789K rwdata, 2400K rodata, 992K init, 1016K bss, 60896K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.200 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.40 BogoMIPS (lpj=2294200)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.000017] ACPI: Core revision 20140214
[    0.006821] ACPI: All ACPI Tables successfully acquired
[    0.036010] Security Framework initialized
[    0.036015] SELinux:  Initializing.
[    0.036022] SELinux:  Starting in permissive mode
[    0.036315] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.038061] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.038900] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.038914] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.039177] Initializing cgroup subsys freezer
[    0.039199] tseg: 00aff00000
[    0.039203] CPU: Physical Processor ID: 0
[    0.039205] CPU: Processor Core ID: 0
[    0.039208] mce: CPU supports 6 MCE banks
[    0.039215] LVT offset 0 assigned for vector 0xf9
[    0.039221] process: using AMD E400 aware idle routine
[    0.039225] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.039338] Freeing SMP alternatives memory: 28K (ffffffff81dbf000 - ffffffff81dc6000)
[    0.039806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.049813] smpboot: CPU0: AMD Athlon(tm) II P360 Dual-Core Processor (fam: 10, model: 06, stepping: 03)
[    0.151727] Performance Events: AMD PMU driver.
[    0.151734] ... version:                0
[    0.151737] ... bit width:              48
[    0.151739] ... generic registers:      4
[    0.151741] ... value mask:             0000ffffffffffff
[    0.151744] ... max period:             00007fffffffffff
[    0.151747] ... fixed-purpose events:   0
[    0.151749] ... event mask:             000000000000000f
[    0.151978] MCE: In-kernel MCE decoding enabled.
[    0.152102] x86: Booting SMP configuration:
[    0.152106] .... node  #0, CPUs:      #1
[    0.165307] x86: Booted up 1 node, 2 CPUs
[    0.165311] smpboot: Total of 2 processors activated (9176.80 BogoMIPS)
[    0.165356] process: System has AMD C1E enabled
[    0.165375] process: Switch to broadcast mode on CPU1
[    0.165772] process: Switch to broadcast mode on CPU0
[    0.165877] devtmpfs: initialized
[    0.166116] PM: Registering ACPI NVS region [mem 0xafdcf000-0xafecefff] (1048576 bytes)
[    0.166261] kworker/u8:0 (18) used greatest stack depth: 14904 bytes left
[    0.166330] RTC time: 18:25:05, date: 06/26/14
[    0.166424] NET: Registered protocol family 16
[    0.166574] cpuidle: using governor ladder
[    0.166578] kworker/u8:0 (19) used greatest stack depth: 14264 bytes left
[    0.166582] cpuidle: using governor menu
[    0.166588] node 0 link 0: io port [0, ffffff]
[    0.166591] TOM: 00000000c0000000 aka 3072M
[    0.166595] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.166597] node 0 link 0: mmio [c0000000, cfffffff]
[    0.166599] node 0 link 0: mmio [d0000000, d41fffff]
[    0.166601] node 0 link 0: mmio [d4200000, d43fffff]
[    0.166603] node 0 link 0: mmio [d4400000, dfffffff]
[    0.166604] node 0 link 0: mmio [e0000000, e0ffffff] ==> none
[    0.166606] node 0 link 0: mmio [e1000000, febfffff] ==> [f0000000, febfffff]
[    0.166609] node 0 link 0: mmio [fec00000, fffeffff]
[    0.166610] node 0 link 0: mmio [ffff0000, ffffffff]
[    0.166612] bus: [bus 00-1f] on node 0 link 0
[    0.166614] bus: 00 [io  0x0000-0xffff]
[    0.166615] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.166616] bus: 00 [mem 0xf0000000-0xfcffffffff]
[    0.166649] ACPI: bus type PCI registered
[    0.166707] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.166713] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.176696] PCI: Using configuration type 1 for base access
[    0.176824] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.176828] mtrr: probably your BIOS does not setup all CPUs.
[    0.176830] mtrr: corrected configuration.
[    0.176905] kworker/u8:0 (33) used greatest stack depth: 13864 bytes left
[    0.179514] ACPI: Added _OSI(Module Device)
[    0.179522] ACPI: Added _OSI(Processor Device)
[    0.179525] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.179528] ACPI: Added _OSI(Processor Aggregator Device)
[    0.200499] ACPI Error: No handler for Region [ECRM] (ffff8800ac42ba68) [EmbeddedControl] (20140214/evregion-162)
[    0.200512] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140214/exfldio-299)
[    0.200519] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff8800ac42a438), AE_NOT_EXIST (20140214/psparse-536)
[    0.200528] ACPI Error: Method execution failed [\_SB_.PCI0.PB9_.NCRD._STA] (Node ffff8800ac42a438), AE_NOT_EXIST (20140214/uteval-103)
[    0.228074] ACPI: Interpreter enabled
[    0.228091] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[    0.228099] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[    0.228117] ACPI: (supports S0 S3 S4 S5)
[    0.228120] ACPI: Using IOAPIC for interrupt routing
[    0.228306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.233426] ACPI: Power Resource [APPR] (off)
[    0.268607] ACPI: Power Resource [PFN0] (off)
[    0.268649] ACPI: Power Resource [PFN1] (off)
[    0.268688] ACPI: Power Resource [PFN2] (off)
[    0.268725] ACPI: Power Resource [PFN3] (off)
[    0.268763] ACPI: Power Resource [PFN4] (off)
[    0.269329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.269338] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.269346] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.269475] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff]; [mem 0xf0000000-0xfffdffff] ignored
[    0.269483] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[    0.269527] PCI host bridge to bus 0000:00
[    0.269531] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.269535] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.269539] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.269542] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.269546] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.269549] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.269553] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.269557] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.269560] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.269564] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.269567] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.269571] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.269574] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.269578] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.269581] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.269585] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.269589] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[    0.269604] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[    0.269708] pci 0000:00:01.0: [103c:9602] type 01 class 0x060400
[    0.269793] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[    0.269832] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.269864] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.269909] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[    0.269946] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.269977] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.270020] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[    0.270065] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.270095] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.270150] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.270169] pci 0000:00:11.0: reg 0x10: [io  0x6018-0x601f]
[    0.270178] pci 0000:00:11.0: reg 0x14: [io  0x6024-0x6027]
[    0.270187] pci 0000:00:11.0: reg 0x18: [io  0x6010-0x6017]
[    0.270196] pci 0000:00:11.0: reg 0x1c: [io  0x6020-0x6023]
[    0.270205] pci 0000:00:11.0: reg 0x20: [io  0x6000-0x600f]
[    0.270215] pci 0000:00:11.0: reg 0x24: [mem 0xd440b000-0xd440b3ff]
[    0.270320] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.270334] pci 0000:00:12.0: reg 0x10: [mem 0xd440a000-0xd440afff]
[    0.270424] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.270471] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.270490] pci 0000:00:12.2: reg 0x10: [mem 0xd4409000-0xd44090ff]
[    0.270567] pci 0000:00:12.2: supports D1 D2
[    0.270569] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.270601] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.270647] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.270660] pci 0000:00:13.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
[    0.270747] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.270795] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.270813] pci 0000:00:13.2: reg 0x10: [mem 0xd4407000-0xd44070ff]
[    0.270890] pci 0000:00:13.2: supports D1 D2
[    0.270892] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.270924] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.270975] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.271092] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.271113] pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[    0.271175] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.271205] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.271251] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.271372] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.271454] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.271467] pci 0000:00:14.5: reg 0x10: [mem 0xd4406000-0xd4406fff]
[    0.271575] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.271588] pci 0000:00:16.0: reg 0x10: [mem 0xd4405000-0xd4405fff]
[    0.271701] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.271719] pci 0000:00:16.2: reg 0x10: [mem 0xd4404000-0xd44040ff]
[    0.271797] pci 0000:00:16.2: supports D1 D2
[    0.271799] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.271873] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.271929] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.271980] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.272034] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.272091] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.272183] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[    0.272192] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.272197] pci 0000:01:05.0: reg 0x14: [io  0x5000-0x50ff]
[    0.272201] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
[    0.272212] pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
[    0.272230] pci 0000:01:05.0: supports D1 D2
[    0.272273] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
[    0.272281] pci 0000:01:05.1: reg 0x10: [mem 0xd4310000-0xd4313fff]
[    0.272315] pci 0000:01:05.1: supports D1 D2
[    0.272381] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.272387] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.272390] pci 0000:00:01.0:   bridge window [mem 0xd4200000-0xd43fffff]
[    0.272393] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.272462] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.272475] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.272496] pci 0000:02:00.0: reg 0x18: [mem 0xd0010000-0xd0010fff 64bit pref]
[    0.272510] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd000ffff 64bit pref]
[    0.272519] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.272578] pci 0000:02:00.0: supports D1 D2
[    0.272580] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.272604] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.276489] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.276501] pci 0000:00:04.0:   bridge window [io  0x3000-0x4fff]
[    0.276505] pci 0000:00:04.0:   bridge window [mem 0xd3200000-0xd41fffff]
[    0.276510] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[    0.276573] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[    0.276579] pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
[    0.276582] pci 0000:00:07.0:   bridge window [mem 0xd2200000-0xd31fffff]
[    0.276586] pci 0000:00:07.0:   bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[    0.276679] pci 0000:06:00.0: [14e4:4727] type 00 class 0x028000
[    0.276700] pci 0000:06:00.0: reg 0x10: [mem 0xd2100000-0xd2103fff 64bit]
[    0.276809] pci 0000:06:00.0: supports D1 D2
[    0.278412] pci 0000:00:09.0: PCI bridge to [bus 06]
[    0.278424] pci 0000:00:09.0:   bridge window [mem 0xd2100000-0xd21fffff]
[    0.278528] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[    0.278534] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    0.278541] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.278543] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.278545] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.278547] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.278549] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.278551] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.278553] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.278555] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.278557] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.278559] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.278561] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.278563] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.278565] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.278567] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.278569] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.278571] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[    0.278613] pci_bus 0000:00: on NUMA node 0
[    0.298523] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.298599] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.298670] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.298739] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.298794] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.298838] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.298882] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.298925] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.299086] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.299142] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.299266] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.299272] vgaarb: loaded
[    0.299274] vgaarb: bridge control possible 0000:01:05.0
[    0.299379] SCSI subsystem initialized
[    0.299438] libata version 3.00 loaded.
[    0.299475] ACPI: bus type USB registered
[    0.299503] usbcore: registered new interface driver usbfs
[    0.299516] usbcore: registered new interface driver hub
[    0.299583] usbcore: registered new device driver usb
[    0.299613] pps_core: LinuxPPS API ver. 1 registered
[    0.299616] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.299624] PTP clock support registered
[    0.299700] Advanced Linux Sound Architecture Driver Initialized.
[    0.299704] PCI: Using ACPI for IRQ routing
[    0.307718] PCI: pci_cache_line_size set to 64 bytes
[    0.307863] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.307866] e820: reserve RAM buffer [mem 0xafcf1000-0xafffffff]
[    0.307867] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[    0.308032] NetLabel: Initializing
[    0.308038] NetLabel:  domain hash size = 128
[    0.308040] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.308057] NetLabel:  unlabeled traffic allowed by default
[    0.308132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.308138] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.310250] Switched to clocksource hpet
[    0.314191] pnp: PnP ACPI init
[    0.314211] ACPI: bus type PNP registered
[    0.315945] pnp 00:00: [dma 4]
[    0.315999] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.316038] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.316065] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.316185] system 00:03: [io  0x0400-0x04cf] could not be reserved
[    0.316192] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.316196] system 00:03: [io  0x04d6] has been reserved
[    0.316200] system 00:03: [io  0x0680-0x06ff] has been reserved
[    0.316203] system 00:03: [io  0x077a] has been reserved
[    0.316207] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.316210] system 00:03: [io  0x0c14] has been reserved
[    0.316214] system 00:03: [io  0x0c50-0x0c52] has been reserved
[    0.316217] system 00:03: [io  0x0c6c] has been reserved
[    0.316221] system 00:03: [io  0x0c6f] has been reserved
[    0.316224] system 00:03: [io  0x0cd0-0x0cdb] has been reserved
[    0.316228] system 00:03: [io  0x0220-0x0227] has been reserved
[    0.316231] system 00:03: [io  0x0260-0x0273] has been reserved
[    0.316235] system 00:03: [io  0x0800] has been reserved
[    0.316238] system 00:03: [io  0x0804] has been reserved
[    0.316242] system 00:03: [io  0x087f] has been reserved
[    0.316263] system 00:03: [io  0x0cdc-0x0cdf] has been reserved
[    0.316267] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.316271] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.316274] system 00:03: [io  0x0200-0x027f] could not be reserved
[    0.316279] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.316359] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.316365] system 00:04: [mem 0x000ec000-0x000fffff] could not be reserved
[    0.316369] system 00:04: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.316373] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.316377] system 00:04: [mem 0xfeb00000-0xfeb00fff] has been reserved
[    0.316382] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.316386] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.316390] system 00:04: [mem 0xffe00000-0xffffffff] has been reserved
[    0.316394] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.316445] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.316538] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.316585] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.316615] pnp 00:08: Plug and Play ACPI device, IDs SYN0177 SYN0100 SYN0002 PNP0f13 (active)
[    0.337535] pnp: PnP ACPI: found 9 devices
[    0.337544] ACPI: bus type PNP unregistered
[    0.344499] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.344539] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.344545] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.344550] pci 0000:00:01.0:   bridge window [mem 0xd4200000-0xd43fffff]
[    0.344555] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.344565] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[    0.344569] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.344573] pci 0000:00:04.0:   bridge window [io  0x3000-0x4fff]
[    0.344578] pci 0000:00:04.0:   bridge window [mem 0xd3200000-0xd41fffff]
[    0.344582] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd10fffff 64bit pref]
[    0.344588] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[    0.344591] pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
[    0.344596] pci 0000:00:07.0:   bridge window [mem 0xd2200000-0xd31fffff]
[    0.344600] pci 0000:00:07.0:   bridge window [mem 0xd1100000-0xd20fffff 64bit pref]
[    0.344608] pci 0000:00:09.0: PCI bridge to [bus 06]
[    0.344612] pci 0000:00:09.0:   bridge window [mem 0xd2100000-0xd21fffff]
[    0.344620] pci 0000:00:14.4: PCI bridge to [bus 07]
[    0.344628] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    0.344643] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.344646] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.344649] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.344651] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.344653] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.344656] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.344658] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.344660] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.344663] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.344664] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.344666] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.344668] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.344670] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.344671] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.344673] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
[    0.344675] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xffffffff]
[    0.344677] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.344679] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[    0.344681] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.344683] pci_bus 0000:02: resource 0 [io  0x3000-0x4fff]
[    0.344685] pci_bus 0000:02: resource 1 [mem 0xd3200000-0xd41fffff]
[    0.344686] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd10fffff 64bit pref]
[    0.344689] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.344690] pci_bus 0000:03: resource 1 [mem 0xd2200000-0xd31fffff]
[    0.344692] pci_bus 0000:03: resource 2 [mem 0xd1100000-0xd20fffff 64bit pref]
[    0.344694] pci_bus 0000:06: resource 1 [mem 0xd2100000-0xd21fffff]
[    0.344696] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.344698] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
[    0.344700] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
[    0.344702] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[    0.344703] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.344705] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.344707] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.344709] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.344710] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.344712] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.344714] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[    0.344716] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.344717] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.344719] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.344721] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
[    0.344723] pci_bus 0000:07: resource 18 [mem 0xc0000000-0xdfffffff]
[    0.344724] pci_bus 0000:07: resource 19 [mem 0xf0000000-0xffffffff]
[    0.344758] NET: Registered protocol family 2
[    0.344924] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.345050] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.345368] TCP: Hash tables configured (established 32768 bind 32768)
[    0.345452] TCP: reno registered
[    0.345464] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.345502] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.345606] NET: Registered protocol family 1
[    0.345775] RPC: Registered named UNIX socket transport module.
[    0.345779] RPC: Registered udp transport module.
[    0.345782] RPC: Registered tcp transport module.
[    0.345784] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.345795] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.447564] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.549487] pci 0000:01:05.0: Boot video device
[    0.549711] microcode: CPU0: patch_level=0x010000c8
[    0.549727] microcode: CPU1: patch_level=0x010000c8
[    0.549809] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.549817] LVT offset 1 assigned for vector 0x400
[    0.549823] IBS: LVT offset 1 assigned
[    0.549837] perf: AMD IBS detected (0x0000001f)
[    0.549972] Scanning for low memory corruption every 60 seconds
[    0.550239] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3 is available/usable.
[    0.550244] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[    0.550247] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[    0.550452] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.550484] audit: initializing netlink subsys (disabled)
[    0.550517] audit: type=2000 audit(1403807104.419:1): initialized
[    0.571988] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.573991] VFS: Disk quotas dquot_6.5.2
[    0.574041] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.574825] NFS: Registering the id_resolver key type
[    0.574842] Key type id_resolver registered
[    0.574845] Key type id_legacy registered
[    0.574856] ntfs: driver 2.1.30 [Flags: R/W DEBUG].
[    0.574994] msgmni has been set to 5506
[    0.575080] SELinux:  Registering netfilter hooks
[    0.575967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.575976] io scheduler noop registered
[    0.575979] io scheduler deadline registered
[    0.576014] io scheduler cfq registered (default)
[    0.576303] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    0.576452] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[    0.576585] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[    0.576658] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.578620] uvesafb: failed to execute /sbin/v86d
[    0.578630] uvesafb: make sure that the v86d helper is installed and executable
[    0.578636] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    0.578639] uvesafb: vbe_init() failed with -22
[    0.578649] uvesafb: probe of uvesafb.0 failed with error -22
[    0.578684] vesafb: mode is 1366x768x32, linelength=5504, pages=2
[    0.578687] vesafb: scrolling: redraw
[    0.578692] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.579172] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010800000, using 8256k, total 16384k
[    0.749911] Console: switching to colour frame buffer device 170x48
[    0.905974] fb0: VESA VGA frame buffer device
[    0.907103] vga16fb: initializing
[    0.907108] vga16fb: mapped to 0xffff8800000a0000
[    0.908275] checking generic (c0000000 1000000) vs hw (a0000 10000)
[    0.908367] fb1: VGA16 VGA frame buffer device
[    0.913163] ACPI: AC Adapter [AC] (on-line)
[    0.914245] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.916336] ACPI: Sleep Button [SLPB]
[    0.917247] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.919202] ACPI: Lid Switch [LID]
[    0.920033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.921783] ACPI: Power Button [PWRF]
[    0.922739] ACPI: Fan [FAN0] (off)
[    0.923612] ACPI: Fan [FAN1] (off)
[    0.924485] ACPI: Fan [FAN2] (off)
[    0.925359] ACPI: Fan [FAN3] (off)
[    0.926228] ACPI: Fan [FAN4] (off)
[    0.927051] ACPI: processor limited to max C-state 1
[    0.933047] thermal LNXTHERM:00: registered as thermal_zone0
[    0.934414] ACPI: Thermal Zone [CPUZ] (71 C)
[    0.991039] thermal LNXTHERM:01: registered as thermal_zone1
[    1.033158] ACPI: Thermal Zone [TZ3] (20 C)
[    1.074962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.075103] ACPI: Battery Slot [BAT0] (battery absent)
[    1.161088] hpet_acpi_add: no address or irqs in _CRS
[    1.204577] Non-volatile memory driver v1.3
[    1.247729] Linux agpgart interface v0.103
[    1.291221] loop: module loaded
[    1.332853] ahci 0000:00:11.0: version 3.0
[    1.333086] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.376479] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.420981] scsi0 : ahci
[    1.464844] scsi1 : ahci
[    1.507928] ata1: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b100 irq 19
[    1.552415] ata2: SATA max UDMA/133 abar m1024@0xd440b000 port 0xd440b180 irq 19
[    1.553428] tsc: Refined TSC clocksource calibration: 2294.254 MHz
[    1.639318] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.682414] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.725471] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.769357] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.813195] sky2: driver version 1.30
[    1.856827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.901360] ehci-pci: EHCI PCI platform driver
[    1.945481] QUIRK: Enable AMD PLL fix
[    1.945507] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.989086] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.032890] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.077110] ehci-pci 0000:00:12.2: debug port 1
[    2.120808] ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409000
[    2.161978] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.162011] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.163369] ata1.00: ATA-8: WDC WD3200BEVT-60A23T0, 02.01A02, max UDMA/100
[    2.163372] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.164013] ata2.00: ATAPI: hp       CDDVDW TS-L633R, 0300, max UDMA/100
[    2.164811] ata1.00: configured for UDMA/100
[    2.164930] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-6 02.0 PQ: 0 ANSI: 5
[    2.165153] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.165212] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.165257] sd 0:0:0:0: [sda] Write Protect is off
[    2.165259] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.165278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.168665] ata2.00: configured for UDMA/100
[    2.171867] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633R  0300 PQ: 0 ANSI: 5
[    2.210991]  sda: sda1 sda2 sda3 sda4
[    2.211378] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.811602] Switched to clocksource tsc
[    2.857433] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.861279] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.861282] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.861435] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.861499] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.042200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.089143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.136015] usb usb1: Product: EHCI Host Controller
[    3.182921] usb usb1: Manufacturer: Linux 3.15.1-gentoo ehci_hcd
[    3.229579] usb usb1: SerialNumber: 0000:00:12.2
[    3.275753] hub 1-0:1.0: USB hub found
[    3.320963] hub 1-0:1.0: 5 ports detected
[    3.366771] ehci-pci 0000:00:13.2: EHCI Host Controller
[    3.412272] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    3.458911] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.505678] ehci-pci 0000:00:13.2: debug port 1
[    3.551762] ehci-pci 0000:00:13.2: irq 17, io mem 0xd4407000
[    3.603898] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.649290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.694604] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.739942] usb usb2: Product: EHCI Host Controller
[    3.784764] usb usb2: Manufacturer: Linux 3.15.1-gentoo ehci_hcd
[    3.829641] usb usb2: SerialNumber: 0000:00:13.2
[    3.874445] hub 2-0:1.0: USB hub found
[    3.919211] hub 2-0:1.0: 5 ports detected
[    3.963129] ehci-pci 0000:00:16.2: EHCI Host Controller
[    4.007111] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    4.013590] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    4.096757] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.143401] ehci-pci 0000:00:16.2: debug port 1
[    4.189331] ehci-pci 0000:00:16.2: irq 17, io mem 0xd4404000
[    4.240388] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    4.285195] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    4.330409] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.375388] usb usb3: Product: EHCI Host Controller
[    4.419707] usb usb3: Manufacturer: Linux 3.15.1-gentoo ehci_hcd
[    4.464088] usb usb3: SerialNumber: 0000:00:16.2
[    4.508199] hub 3-0:1.0: USB hub found
[    4.551752] hub 3-0:1.0: 4 ports detected
[    4.594306] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.637091] ohci-pci: OHCI PCI platform driver
[    4.679430] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    4.721986] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    4.765251] ohci-pci 0000:00:12.0: irq 18, io mem 0xd440a000
[    4.862020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.904635] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.947010] usb usb4: Product: OHCI PCI host controller
[    4.989191] usb usb4: Manufacturer: Linux 3.15.1-gentoo ohci_hcd
[    5.031171] usb usb4: SerialNumber: 0000:00:12.0
[    5.072995] hub 4-0:1.0: USB hub found
[    5.114113] hub 4-0:1.0: 5 ports detected
[    5.155046] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    5.196235] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    5.237930] ohci-pci 0000:00:13.0: irq 18, io mem 0xd4408000
[    5.306951] usb 1-5: New USB device found, idVendor=05c8, idProduct=0403
[    5.334691] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.334693] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.334695] usb usb5: Product: OHCI PCI host controller
[    5.334696] usb usb5: Manufacturer: Linux 3.15.1-gentoo ohci_hcd
[    5.334697] usb usb5: SerialNumber: 0000:00:13.0
[    5.560372] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.560481] hub 5-0:1.0: USB hub found
[    5.560495] hub 5-0:1.0: 5 ports detected
[    5.560840] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    5.560879] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    5.560906] ohci-pci 0000:00:14.5: irq 18, io mem 0xd4406000
[    5.812593] usb 1-5: Product: HP Webcam [2 MP Fixed]
[    5.817368] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    5.817370] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.817371] usb usb6: Product: OHCI PCI host controller
[    5.817372] usb usb6: Manufacturer: Linux 3.15.1-gentoo ohci_hcd
[    5.817373] usb usb6: SerialNumber: 0000:00:14.5
[    5.817544] hub 6-0:1.0: USB hub found
[    5.817587] hub 6-0:1.0: 2 ports detected
[    5.817828] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    5.817865] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    5.817891] ohci-pci 0000:00:16.0: irq 18, io mem 0xd4405000
[    6.269320] usb 1-5: Manufacturer: Foxlink
[    6.274050] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    6.274052] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.274053] usb usb7: Product: OHCI PCI host controller
[    6.274055] usb usb7: Manufacturer: Linux 3.15.1-gentoo ohci_hcd
[    6.274056] usb usb7: SerialNumber: 0000:00:16.0
[    6.274208] hub 7-0:1.0: USB hub found
[    6.274251] hub 7-0:1.0: 4 ports detected
[    6.274335] uhci_hcd: USB Universal Host Controller Interface driver
[    6.274381] usbcore: registered new interface driver usblp
[    6.274413] usbcore: registered new interface driver usb-storage
[    6.274452] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    6.276232] i8042: Detected active multiplexing controller, rev 1.1
[    6.276947] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.276950] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    6.276977] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    6.276994] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    6.277015] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    6.277093] mousedev: PS/2 mouse device common for all mice
[    6.277793] rtc_cmos 00:05: RTC can wake from S4
[    6.277996] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    6.278045] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs
[    6.278172] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    6.278195] hidraw: raw HID events driver (C) Jiri Kosina
[    6.278379] usbcore: registered new interface driver usbhid
[    6.278379] usbhid: USB HID core driver
[    6.278576] Netfilter messages via NETLINK v0.30.
[    6.278584] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    6.278709] ctnetlink v0.93: registering with nfnetlink.
[    6.278798] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.278833] TCP: cubic registered
[    6.278834] Initializing XFRM netlink socket
[    6.278945] NET: Registered protocol family 10
[    6.279158] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    6.279191] sit: IPv6 over IPv4 tunneling driver
[    6.279324] NET: Registered protocol family 17
[    6.279344] Key type dns_resolver registered
[    6.279597] registered taskstats version 1
[    6.280162]   Magic number: 2:239:444
[    6.301530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    7.839424] console [netcon0] enabled
[    7.839477] usb 1-5: SerialNumber: 200909240102
[    7.918462] netconsole: network logging started
[    7.958103] acpi-cpufreq: overriding BIOS provided _PSD data
[    7.997775] PM: Hibernation image not present or could not be loaded.
[    7.997776] ALSA device list:
[    8.036778]   No soundcards found.
[    8.425309] usb 5-4: new full-speed USB device number 2 using ohci-pci
[    8.621236] usb 5-4: New USB device found, idVendor=0a5c, idProduct=21b4
[    8.660348] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1439
Location: indiana

PostPosted: Thu Jun 26, 2014 5:08 pm    Post subject: Reply with quote

dmesg part2

Code:
[    8.699737] usb 5-4: Product: Broadcom 2070 Bluetooth
[    8.739118] usb 5-4: Manufacturer: Broadcom Corp
[    8.778348] usb 5-4: SerialNumber: CC52AF16B877
[    8.946801] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 646827
[    9.033992] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[    9.080851] md: Waiting for all devices to be available before autodetect
[    9.124266] md: If you don't use raid, use raid=noautodetect
[    9.167656] md: Autodetecting RAID arrays.
[    9.210846] md: Scanned 0 and added 0 devices.
[    9.254689] md: autorun ...
[    9.298713] md: ... autorun DONE.
[    9.618541] random: nonblocking pool is initialized
[    9.674736] REISERFS (device sda3): found reiserfs format "3.6" with standard journal
[    9.720511] REISERFS (device sda3): using ordered data mode
[    9.766071] reiserfs: using flush barriers
[    9.815788] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    9.912358] REISERFS (device sda3): checking transaction log (sda3)
[    9.960771] REISERFS debug (device sda3): journal-1153: found in header: first_unflushed_offset 4180, last_flushed_trans_id 7286096
[    9.964580] REISERFS debug (device sda3): journal-1006: found valid transaction start offset 4180, len 1 id 7286097
[    9.964585] REISERFS debug (device sda3): journal-1206: Starting replay from offset 4180, trans_id 7286097
[    9.964589] REISERFS debug (device sda3): journal-1037: journal_read_transaction, offset 4180, len 1 mount_id 1044
[    9.972451] REISERFS debug (device sda3): journal-1095: setting journal start to offset 4183
[    9.972726] REISERFS debug (device sda3): journal-1037: journal_read_transaction, offset 4183, len 1376592 mount_id 1419369
[    9.972730] REISERFS debug (device sda3): journal-1039: journal_read_trans skipping because 4183 is too old
[    9.972732] REISERFS debug (device sda3): journal-1299: Setting newest_mount_id to 1045
[    9.972734] REISERFS (device sda3): replayed 1 transactions in 0 seconds
[   10.082321] REISERFS (device sda3): Using r5 hash to sort names
[   10.149558] VFS: Mounted root (reiserfs filesystem) readonly on device 8:3.
[   10.198088] devtmpfs: mounted
[   10.246904] Freeing unused kernel memory: 992K (ffffffff81cc7000 - ffffffff81dbf000)
[   10.296654] Write protecting the kernel read-only data: 12288k
[   10.348482] Freeing unused kernel memory: 600K (ffff88000176a000 - ffff880001800000)
[   10.404039] Freeing unused kernel memory: 1696K (ffff880001a58000 - ffff880001c00000)
[   11.692184] kbd_mode (986) used greatest stack depth: 13072 bytes left
[   11.787007] loadkeys (987) used greatest stack depth: 12376 bytes left
[   11.838490] init-early.sh (984) used greatest stack depth: 12152 bytes left
[   12.723198] checkpath (1002) used greatest stack depth: 12048 bytes left
[   15.183597] mkdir (1019) used greatest stack depth: 11360 bytes left
[   16.532697] systemd-udevd[1157]: starting version 212
[   16.723178] udevadm (1165) used greatest stack depth: 11272 bytes left
[   18.006718] ACPI: Video Device [IGFX] (multi-head: yes  rom: no  post: no)
[   18.015966] acpi device:01: registered as cooling_device7
[   18.016057] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input12
[   18.144234] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[   18.144258] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   18.144275] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   18.144309] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   18.144392] bcma: bus0: Found rev 8 PMU (capabilities 0x084C3008)
[   18.144401] bcma: bus0: SPROM offset 0x830
[   18.146330] bcma: bus0: Found SPROM revision 8
[   18.156143] bcma: bus0: GPIO driver not activated
[   18.156146] bcma: bus0: Bus registered
[   18.188711] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   18.188722] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   18.189050] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[   18.189254] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9001079a000, 78:e3:b5:4e:12:5d, XID 04e00000 IRQ 43
[   18.376948] cfg80211: Calling CRDA to update world regulatory domain
[   18.411443] systemd-sysctl[1191]: Overwriting earlier assignment of kernel/sysrq in file '/usr/lib64/sysctl.d/60-gentoo.conf'.
[   18.438466] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   18.438472] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.438475] sound hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   18.438477] sound hdaudioC0D0:    mono: mono_out=0x0
[   18.438478] sound hdaudioC0D0:    inputs:
[   18.438481] sound hdaudioC0D0:      Internal Mic=0x11
[   18.438483] sound hdaudioC0D0:      Mic=0xa
[   18.498377] [drm] Initialized drm 1.1.0 20060810
[   18.690755] systemd-sysctl[1204]: Overwriting earlier assignment of kernel/sysrq in file '/usr/lib64/sysctl.d/60-gentoo.conf'.
[   18.989698] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[   18.989767] bcma: bus0: Switched to core: 0x812
[   18.990724] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.167758] systemd-sysctl[1207]: Overwriting earlier assignment of kernel/sysrq in file '/usr/lib64/sysctl.d/60-gentoo.conf'.
[   19.708068] [drm] radeon kernel modesetting enabled.
[   19.708154] checking generic (c0000000 1000000) vs hw (c0000000 10000000)
[   19.708155] fb: switching to radeondrmfb from VESA VGA
[   19.708196] Console: switching to colour dummy device 80x25
[   19.708324] checking generic (a0000 10000) vs hw (c0000000 10000000)
[   19.708326] fb: switching to radeondrmfb from VGA16 VGA
[   19.708943] [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1475).
[   19.708962] [drm] register mmio base: 0xD4300000
[   19.708964] [drm] register mmio size: 65536
[   19.709616] ATOM BIOS: HP_Valima
[   19.709638] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[   19.709641] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[   19.709646] [drm] Detected VRAM RAM=256M, BAR=256M
[   19.709647] [drm] RAM width 32bits DDR
[   19.709740] [TTM] Zone  kernel: Available graphics memory: 1411242 kiB
[   19.709744] [TTM] Initializing pool allocator
[   19.709749] [TTM] Initializing DMA pool allocator
[   19.709835] [drm] radeon: 256M of VRAM memory ready
[   19.709837] [drm] radeon: 512M of GTT memory ready.
[   19.709859] [drm] Loading RS780 Microcode
[   19.770382] [drm] radeon: power management initialized
[   19.770392] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   19.778448] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[   19.778543] radeon 0000:01:05.0: WB enabled
[   19.778547] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800a969ec00
[   19.778550] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   19.778551] [drm] Driver supports precise vblank timestamp query.
[   19.778567] [drm] radeon: irq initialized.
[   19.810976] [drm] ring test on 0 succeeded in 1 usecs
[   19.811078] [drm] ib test on ring 0 succeeded in 0 usecs
[   19.811366] [drm] radeon atom DIG backlight initialized
[   19.811368] [drm] Radeon Display Connectors
[   19.811369] [drm] Connector 0:
[   19.811370] [drm]   VGA-1
[   19.811372] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   19.811373] [drm]   Encoders:
[   19.811374] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   19.811375] [drm] Connector 1:
[   19.811376] [drm]   LVDS-1
[   19.811378] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   19.811379] [drm]   Encoders:
[   19.811380] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[   19.811381] [drm] Connector 2:
[   19.811382] [drm]   HDMI-A-1
[   19.811383] [drm]   HPD1
[   19.811385] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   19.811385] [drm]   Encoders:
[   19.811386] [drm]     DFP1: INTERNAL_UNIPHY
[   20.785249] [drm] fb mappable at 0xC0141000
[   20.785253] [drm] vram apper at 0xC0000000
[   20.785254] [drm] size 4325376
[   20.785256] [drm] fb depth is 24
[   20.785257] [drm]    pitch is 5632
[   20.785368] fbcon: radeondrmfb (fb0) is primary device
[   20.816098] Console: switching to colour frame buffer device 170x48
[   20.827418] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[   20.827421] radeon 0000:01:05.0: registered panic notifier
[   20.827444] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:05.0 on minor 0
[   20.850675] cfg80211: World regulatory domain updated:
[   20.850681] cfg80211:  DFS Master region: unset
[   20.850682] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.850686] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.850688] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.850690] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.850692] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.850693] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.850844] cfg80211: Calling CRDA for country: US
[   20.874794] cfg80211: Regulatory domain changed to country: US
[   20.874798] cfg80211:  DFS Master region: unset
[   20.874800] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.874803] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
[   20.874805] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
[   20.874807] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[   20.874809] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[   20.874811] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
[   20.874813] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
[   20.874815] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   23.541723] reiserfs: enabling write barrier flush mode


no error messages regarding DRM, looks like it is ok. but how to add GLX extension ?? (which is missing with glxinfo)
_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1439
Location: indiana

PostPosted: Thu Jun 26, 2014 5:27 pm    Post subject: Reply with quote

after using eselect opengl set .... the error changed :


Code:

$ glxinfo     
name of display: :0.0
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Segmentation fault


to
Code:

$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
Error: couldn't find RGB GLX visual or fbconfig

_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
Mgiese
Veteran
Veteran


Joined: 23 Mar 2005
Posts: 1439
Location: indiana

PostPosted: Thu Jun 26, 2014 5:36 pm    Post subject: Reply with quote

after restart that error was gone :)

thanks a lot anyways
_________________
I do not have a Superman complex, for I am God not Superman :D
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 5761

PostPosted: Fri Jun 27, 2014 4:38 am    Post subject: Reply with quote

Mgiese wrote:
i added
Code:
Section "Device"
  Driver "radeon"
EndSection
Section "dri"
  Mode 0666
EndSection


to /etc/X11/xorg.conf.d/10-dri.conf

That works, but it's usually a better idea to add your user to the "video" group than giving every uid on the system read/write access to your hardware. Plus you don't need the config file then.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum