Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Do I have a drive failing? (yes it is)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2155

PostPosted: Thu Jul 03, 2014 11:30 pm    Post subject: Do I have a drive failing? (yes it is) Reply with quote

I began to notice really terrible performance in one of my drives. I would begin to write data to the drive, and it would be fast at first, then slow to a crawl.

I identified the drive by looking at the lights and noticed one drive out of the three stayed lit while the other two seemed to be waiting on it.

I've pasted the output of smartctl -a of the drive.

Code:
projector bigun # smartctl -a /dev/sdc
smartctl 6.1 2013-03-16 r3800 [i686-linux-3.10.25-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda Green (AF)
Device Model:     ST1500DL003-9VT16L
Serial Number:    5YDA0K0K
LU WWN Device Id: 5 000c50 0532a825d
Firmware Version: CC32
User Capacity:    1,500,301,910,016 bytes [1.50 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5900 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jul  3 19:26:30 2014 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                (  633) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 282) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x30b7) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   099   099   006    Pre-fail  Always       -       1905184
  3 Spin_Up_Time            0x0003   092   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       20
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   065   060   030    Pre-fail  Always       -       227814739580
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       12929
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       20
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   071   065   045    Old_age   Always       -       29 (Min/Max 24/32)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       13
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       20
194 Temperature_Celsius     0x0022   029   040   000    Old_age   Always       -       29 (0 17 0 0 0)
195 Hardware_ECC_Recovered  0x001a   036   009   000    Old_age   Always       -       1905184
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       43546673427073
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       2904409922
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1353003844

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 90%     12929         -
# 2  Short offline       Completed without error       00%     12929         -
# 3  Short offline       Completed without error       00%        12         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Last edited by Bigun on Fri Jul 04, 2014 12:24 am; edited 1 time in total
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 7328
Location: Saint Amant, Acadiana

PostPosted: Thu Jul 03, 2014 11:40 pm    Post subject: Reply with quote

Tried to re-seat the cable? Usually when drive dies the reallocated sector count goes up, yours is zero.
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Bigun
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 2155

PostPosted: Fri Jul 04, 2014 12:23 am    Post subject: Reply with quote

I think there might be a chip-level problem somewhere. I pulled the drive due to it's performance issues. Now I'm trying to power up the drive and it's not even spinning up now. I think I just answered my own question.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum