Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED]gentoo doesn't start after install monitor turns off
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
apajan
n00b
n00b


Joined: 20 Jul 2014
Posts: 3

PostPosted: Sun Jul 20, 2014 4:47 pm    Post subject: [SOLVED]gentoo doesn't start after install monitor turns off Reply with quote

Hello.
I've installed gentoo as it's recommended by the handbook. After configuring bootloader i'd got a problem after reboot:
grub is started, I choose my gentoo, it reads the kernel file, reads initramfs file and my screen turns off, whilst PC continues working. I'm trying to ping my gentoo system from another pc, it does not respond too.
I used genkernel and grub-legacy.

That's the last I see before it goes down:

Code:
Booting 'Gentoo Linux 3.12.21'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-3.12.21-gentoo-r1 root=/dev/sda4
[Linux-bzImage, setup=0x3c00, size=0x60e430]
initrd /boot/initramfs-genkernel-x86-3.12.32-gentoo-r1
[Linux-initrd @ 0x37cd7000, 0x3182fc bytes]


Last edited by apajan on Mon Jul 21, 2014 5:28 pm; edited 1 time in total
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7552
Location: Goose Creek SC

PostPosted: Sun Jul 20, 2014 5:27 pm    Post subject: Reply with quote

genkernel does not always setup graphics or networking support correctly. boot the livecd/usb, mount the gentoo partitions, run
Code:
wgetpaste /mnt/gentoo/usr/src/linux/.config
wgetpaste /mnt/gentoo/etc/portage/make.conf
lspci -k | wgetpaste
post the url's returned. if a radeon or nvidia video card will you be running oem or open source video drivers?
_________________
Defund the FCC.
Back to top
View user's profile Send private message
apajan
n00b
n00b


Joined: 20 Jul 2014
Posts: 3

PostPosted: Sun Jul 20, 2014 5:51 pm    Post subject: Reply with quote

DONAHUE wrote:
genkernel does not always setup graphics or networking support correctly. boot the livecd/usb, mount the gentoo partitions, run
Code:
wgetpaste /mnt/gentoo/usr/src/linux/.config
wgetpaste /mnt/gentoo/etc/portage/make.conf
lspci -k | wgetpaste
post the url's returned. if a radeon or nvidia video card will you be running oem or open source video drivers?



http://bpaste.net/show/481913/
http://bpaste.net/show/481915/
http://bpaste.net/show/481916/

since I've found and downloaded an oem driver for my video card, I'd use it. But first of all, I'd like to have my system up with any driver +) Thanks.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7552
Location: Goose Creek SC

PostPosted: Sun Jul 20, 2014 7:02 pm    Post subject: Reply with quote

from chroot:
Code:
genkernel --menuconfig all
0r
Code:
cd /usr/src/linux;make menuconfig
edit menuconfig to
Quote:
Graphics support --->
<*> /dev/agpgart (AGP Support) --->
--- /dev/agpgart (AGP Support)
< > AMD Opteron/Athlon64 on-CPU GART support
<*> Intel 440LX/BX/GX, I8xx and E7x05 chipset support
< > SiS chipset support
< > VIA chipset support
-*- VGA Arbitration
(16) Maximum number of GPUs
[ ] Laptop Hybrid Graphics - GPU switching support
<*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
I2C encoder or helper chips --->
< > 3dfx Banshee/Voodoo3+ (NEW)
< > ATI Rage 128 (NEW)
<*> ATI Radeon
[ ] Enable userspace modesetting on radeon (DEPRECATED) (NEW)
< > Nouveau (nVidia) cards (NEW)
< > Intel I810 (NEW)
< > Intel 8xx/9xx/G3x/G4x/HD Graphics (NEW)
< > Matrox g200/g400 (NEW)
< > SiS video cards (NEW)
< > Via unichrome video cards (NEW)
< > Savage video cards (NEW)
< > DRM driver for VMware Virtual GPU (NEW)
< > Intel GMA5/600 KMS Framebuffer (NEW)
< > DisplayLink (NEW)
< > AST server chips (NEW)
< > Kernel modesetting driver for MGA G200 server engines (NEW)
< > Cirrus driver for QEMU emulated device (NEW)
< > QXL virtual GPU (NEW)
<M> Lowlevel video output switch controls
-*- Support for frame buffer devices --->
--- Support for frame buffer devices
[*] Enable firmware EDID
[ ] Framebuffer foreign endianness support ----
[*] Enable Video Mode Handling Helpers
[*] Enable Tile Blitting Support
*** Frame buffer hardware drivers ***
< > Cirrus Logic support
< > Permedia2 support
< > CyberPro 2000/2010/5000 support
< > Arc Monochrome LCD board support
[ ] Asiliant (Chips) 69000 display support
[ ] IMS Twin Turbo display support
< > VGA 16-color graphics support
[ ] VESA VGA graphics support
[ ] EFI-based Framebuffer Support
< > N411 Apollo/Hecuba devkit support
< > Hercules mono graphics support
< > Epson S1D13XXX framebuffer support
< > nVidia Framebuffer Support
< > nVidia Riva support
< > Intel740 support
< > Intel LE80578 (Vermilion) support
< > Matrox acceleration
< > ATI Radeon display support
< > ATI Rage128 display support
< > ATI Mach64 display support
< > S3 Trio/Virge support
< > S3 Savage support
< > SiS/XGI display support
< > VIA UniChrome (Pro) and Chrome9 display support
< > NeoMagic display support
< > IMG Kyro support
< > 3Dfx Banshee/Voodoo3/Voodoo5 display support
< > 3Dfx Voodoo Graphics (sst1) support
< > VIA VT8623 support
< > Trident/CyberXXX/CyberBlade support
< > ARK 2000PV support
< > Permedia3 support
< > Fujitsu carmine frame buffer support
< > Silicon Motion SM501 framebuffer support
< > SMSC UFX6000/7000 USB Framebuffer support
< > Displaylink USB Framebuffer support
< > Goldfish Framebuffer
< > Virtual Frame Buffer support (ONLY FOR TESTING!)
< > E-Ink Metronome/8track controller support
< > Fujitsu MB862xx GDC support
< > E-Ink Broadsheet/Epson S1D13521 controller support
< > AUO-K190X EPD controller support
[ ] Simple framebuffer support
[ ] Exynos Video driver support ----
-*- Backlight & LCD device support --->
--- Backlight & LCD device support
<M> Lowlevel LCD controls
< > Platform LCD controls
-*- Lowlevel Backlight controls
<M> Generic (aka Sharp Corgi) Backlight Driver
< > Apple Backlight Driver
< > Tabletkiosk Sahara Touch-iT Backlight Driver
< > Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED
< > Backlight Driver for ADP8870 using WLED
< > Backlight Driver for LM3630
< > Backlight Driver for LM3639
< > Backlight driver for TI LP855X
< > Sanyo LV5207LP Backlight
< > Rohm BD6107 Backlight
Console display driver support --->
-*- VGA text console
[ ] Enable Scrollback Buffer in System RAM
-*- Framebuffer Console support
-*- Map the console to the primary display device
[ ] Framebuffer Console Rotation
[*] Bootup logo --->
--- Bootup logo
[*] Standard black and white Linux logo
[*] Standard 16-color Linux logo
[*] Standard 224-color Linux logo
exit saving configuration, if genkernel exit saving configuration allow genkernel to complete, if not genkernel,
Code:
make && make modules_install && make install
check that names in /boot match those in boot menu
r8169 is selected in the kernel config which is correct. run ifconfig to determine the interface name, usually en____ , run
Code:
ls -l /etc/init.d/net*
check for symlink
Quote:
/etc/init.d/net.<interface name> -> net.lo
and file
Code:
/etc/init.d/net.lo
run
Code:
rc-update show
check for net.lo in boot runlevel and net.<interface name> in default run level and dhcp not in any runlevel. emerge dhcpcd or dhcp if not already done.
reboot.
if you have a terminal, run
Code:
 ifconfig -a
, does the kernel see the interface?
Code:
ifconfig
is the interface up?
Add VIDEO_CARDS="radeon" INPUT_DEVICES="evdev" to /etc/portage/make.conf before emerge xorg-server
_________________
Defund the FCC.
Back to top
View user's profile Send private message
apajan
n00b
n00b


Joined: 20 Jul 2014
Posts: 3

PostPosted: Mon Jul 21, 2014 4:49 pm    Post subject: Reply with quote

I'm UP! Bless you! :D
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum