Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] Error with USB via udisks
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 281
Location: Canada

PostPosted: Tue Jul 29, 2014 7:58 pm    Post subject: [Solved] Error with USB via udisks Reply with quote

So I referred to this when I was installing udisks -> http://wiki.gentoo.org/wiki/Udisks
I put "udisks" in my make.conf. But it didn't pull down udisks like the wiki said it would.
So I manually installed it via # emerge --ask sys-fs/udisks
It finished emerging and when I tried # udisks --enumerate. it would give me this error:
Code:
 # udisks --enumerate
bash: udisks: command not found

Then I went into my file manager (spacefm) and when to "Devices" then clicking on my USB, it gave me this error:
Code:

(process:29345): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed

(process:29345): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(process:29345): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

(process:29345): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(process:29345): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

(process:29345): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(process:29345): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

(process:29345): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(process:29345): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

(process:29345): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(process:29345): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

(process:29345): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
Error connecting to the udisks daemon: Could not connect: No such file or directory


:/ ?


Last edited by ShanaXXII on Thu Jul 31, 2014 10:38 pm; edited 1 time in total
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 732
Location: S.O. France

PostPosted: Tue Jul 29, 2014 9:09 pm    Post subject: Reply with quote

Can you post your emerge --info , emerge -pv udisks and .xinitrc
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 281
Location: Canada

PostPosted: Tue Jul 29, 2014 10:20 pm    Post subject: Reply with quote

sebB wrote:
Can you post your emerge --info , emerge -pv udisks and .xinitrc

how do u copy the output of emerge --info? its really long, and i dont really want to copy it word for word.

But these are my others:
Code:
# emerge -pv udisks
These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R   ] sys-fs/udisks-2.1.3:2 USE="gptfdisk introspection -cryptsetup =debug (-selinux) -systemd" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB

# nano -w ,xinitrc
[[ -f ~/.Xresources ]] $$ xrdb -merge ~/.Xresources

while true: do
xbacklight -set 25
feh --bg-scale /root/wallpaper.jpg

$DWM_VOL=$( alsamixer -set Master );
DWM_CLOCK=$( date '+%a %b %e %Y | $k:%M' );
DWM_STATUS" | WiFi:[] | Lang:[] | Vol:$DWM_VOL | $DWM_CLOCK";

xsetroot -name "$DWM_STATUS"
sleep $DWM_REFRESH_INT:

done &

exec dwm


My statusbar isn't really complete yet, and idk how to get it working, the time is the ony thing working so far.. :oops:
if you're an expert, can u help me here too?
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 732
Location: S.O. France

PostPosted: Tue Jul 29, 2014 11:46 pm    Post subject: Reply with quote

Quote:
how do u copy the output of emerge --info?

You can do "emerge --info >> foo.txt" and open this file with a text editor if you can't copy or emerge wgetpaste then "emerge --info | wgetpaste" an copy the url

Try enabling dbus in your xinitrc: replace "exec dwm" by "exec dbus-launch dwm"
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 281
Location: Canada

PostPosted: Wed Jul 30, 2014 12:26 am    Post subject: Reply with quote

sebB wrote:
Quote:
how do u copy the output of emerge --info?

You can do "emerge --info >> foo.txt" and open this file with a text editor
Try enabling dbus in your xinitrc: replace "exec dwm" by "exec dbus-launch dwm"

Code:
Portage 2.2.8-r1 (default/linux/amd64/13.0/desktop, gcc-4.7.3, glibc-2.17, 3.12.21-gentoo-r1 x86_64)
=================================================================
System uname: Linux-3.12.21-gentoo-r1-x86_64-Intel-R-_Core-TM-_i5_CPU_M_430_@_2.27GHz-with-gentoo-2.2
KiB Mem:     3847588 total,   3133844 free
KiB Swap:    2097148 total,   2097148 free
Timestamp of tree: Sat, 26 Jul 2014 19:45:01 +0000
ld GNU ld (Gentoo 2.23.2 p1.0) 2.23.2
app-shells/bash:          4.2_p45
dev-lang/python:          2.7.6, 3.3.3
dev-util/cmake:           2.8.12.2-r1
dev-util/pkgconfig:       0.28-r1
sys-apps/baselayout:      2.2
sys-apps/openrc:          0.12.4
sys-apps/sandbox:         2.6-r1
sys-devel/autoconf:       2.13, 2.69
sys-devel/automake:       1.12.6, 1.13.4
sys-devel/binutils:       2.23.2
sys-devel/gcc:            4.7.3-r1
sys-devel/gcc-config:     1.7.3
sys-devel/libtool:        2.4.2-r1
sys-devel/make:           3.82-r4
sys-kernel/linux-headers: 3.13 (virtual/os-headers)
sys-libs/glibc:           2.17
Repositories: gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA AdobeFlash-11.x"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync4.ca.gentoo.org/gentoo-portage"
USE="X a52 aac acl acpi alsa amd64 berkdb bindist bluetooth branding bzip2 cairo cdda cdr cli consolekit cracklib crypt cups cxx dbus dri dts dvd dvdr emboss encode exif fam firefox flac fortran gdbm gif gpm iconv ipv6 jpeg lcms ldap libnotify mad mmx mng modules mp3 mp4 mpeg multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds qt3support readline savedconfig sdl session spell sse sse2 ssl startup-notification svg tcpd tiff truetype udev udisks unicode upower usb vorbis wxwidgets x264 xcb xml xv xvid zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="intel i965" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON

I changed my .xinitrc and exited X server. # startx and it still gave me the same error when i try to mount it. :\
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 732
Location: S.O. France

PostPosted: Wed Jul 30, 2014 4:26 pm    Post subject: Reply with quote

I don't use dwm
Did you try a simply .xinitrc like the exemple in the wiki?
Code:
exec ck-launch-session dbus-launch --sh-syntax --exit-with-session dwm
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 281
Location: Canada

PostPosted: Wed Jul 30, 2014 5:04 pm    Post subject: Reply with quote

sebB wrote:
Did you try a simply .xinitrc like the exemple in the wiki?
Code:
exec ck-launch-session dbus-launch --sh-syntax --exit-with-session dwm

I changed my .xinitrc to
Code:
exec ck-launch-session dbus-launch --sh-syntax --exit-with-session dwm

rebooted
# startx
opened up spacefm. selected Device and it still gave me the same error.
And i still can't use the udisks command in the terminal.. :/

I tried another #emerge --ask --changed-use --deep @world
and it gave me about of code :?
here it is: http://jpst.it/jtIZ
last time, i did it, it gave me nothing and quit
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 732
Location: S.O. France

PostPosted: Wed Jul 30, 2014 9:04 pm    Post subject: Reply with quote

Try: emerge -uDNvp --with-bdeps=y @world
What is the file system of the hard drive you want to mount?
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 281
Location: Canada

PostPosted: Wed Jul 30, 2014 11:26 pm    Post subject: Reply with quote

sebB wrote:
Try: emerge -uDNvp --with-bdeps=y @world
What is the file system of the hard drive you want to mount?

FAT32, exFAT, NTFS mostly.
Code:
# emerge -uDNvp --with-bdeps=y @world

These are the packages that would be merged, in order:

Calculating dependencies  .... ..... done!
[ebuild     U  ] perl-core/version-0.990.100-r1 [0.990.100] 105 kB
[ebuild     U  ] perl-core/CPAN-Meta-YAML-0.8.0-r1 [0.8.0] 31 kB
[ebuild     U  ] perl-core/ExtUtils-Manifest-1.610.0-r1 [1.610.0] 29 kB
[ebuild     U  ] perl-core/IO-1.25-r1 [1.25] 52 kB
[ebuild     U  ] perl-core/Params-Check-0.360.0-r1 [0.360.0] 12 kB
[ebuild     U  ] perl-core/Module-Metadata-1.0.11-r1 [1.0.11] 27 kB
[ebuild     U  ] perl-core/Parse-CPAN-Meta-1.440.400-r1 [1.440.400] 8 kB
[ebuild     U  ] perl-core/CPAN-Meta-Requirements-2.122.0-r1 [2.122.0] 21 kB
[ebuild     U  ] perl-core/Archive-Tar-1.900.0-r1 [1.900.0] 57 kB
[ebuild     U  ] perl-core/IPC-Cmd-0.780.0-r1 [0.780.0] 27 kB
[ebuild     U  ] perl-core/ExtUtils-CBuilder-0.280.205-r1 [0.280.205] 34 kB
[ebuild     U  ] perl-core/ExtUtils-ParseXS-3.180.0-r1 [3.180.0] 62 kB
[ebuild     U  ] perl-core/ExtUtils-MakeMaker-6.640.0-r1 [6.640.0] 412 kB
[ebuild     U  ] perl-core/CPAN-Meta-2.120.921-r1 [2.120.921] 75 kB
[ebuild     U  ] perl-core/Module-Build-0.400.300-r1 [0.400.300] USE="{-test}" 301 kB

Total: 15 packages (15 upgrades), Size of downloads: 1,246 kB
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 732
Location: S.O. France

PostPosted: Wed Jul 30, 2014 11:53 pm    Post subject: Reply with quote

What does dmesg say when you insert your drive?
Post
Code:
grep VFAT /usr/src/linux/.config
grep NTFS /usr/src/linux/.config
groups
rc-update show
emerge -pv ntfs3g
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 281
Location: Canada

PostPosted: Thu Jul 31, 2014 12:44 am    Post subject: Reply with quote

sebB wrote:
What does dmesg say when you insert your drive?
Post
Code:
grep VFAT /usr/src/linux/.config
grep NTFS /usr/src/linux/.config
groups
rc-update show
emerge -pv ntfs3g

dmesg
Code:
$ dmesg
............
[  150.849226] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[  151.046919] usb 2-1.2: New USB device found, idVendor=058f, idProduct=6387
[  151.046924] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  151.046926] usb 2-1.2: Product: Mass Storage
[  151.046927] usb 2-1.2: Manufacturer: Generic
[  151.046929] usb 2-1.2: SerialNumber: EF02F1D0
[  151.047308] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[  151.047360] scsi5 : usb-storage 2-1.2:1.0
[  152.041276] scsi 5:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2
[  152.041609] sd 5:0:0:0: Attached scsi generic sg2 type 0
[  152.042757] sd 5:0:0:0: [sdc] 16084992 512-byte logical blocks: (8.23 GB/7.66 GiB)
[  152.043369] sd 5:0:0:0: [sdc] Write Protect is off
[  152.043374] sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 00
[  152.043992] sd 5:0:0:0: [sdc] No Caching mode page found
[  152.043995] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  152.046875] sd 5:0:0:0: [sdc] No Caching mode page found
[  152.046879] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  152.149284]  sdc: unknown partition table
[  152.151780] sd 5:0:0:0: [sdc] No Caching mode page found
[  152.151784] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[  152.151788] sd 5:0:0:0: [sdc] Attached SCSI removable disk

Code:
$ grep VFAT /usr/src/linux/.config
CONFIG_VFAT_FS=y

$ grep NTFS /usr/src/linux/.config
CONFIG_NTFS_FS=y
*CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

$ groups
wheel audio users shana

$ sudo rc-update show
alsasound | boot
bootmisc | boot
devfs | sysinit
dmesg | sysinit
fsck | boot
hostname | boot
hwclock | boot
keymaps | boot
killprocs | shutdown
kmod-static-nodes | sysinit
local | default
localmount | boot
loopback | boot
modules | boot
mount-ro | shutdown
mtab | default
net.eth0 | default
net.wlan0 | default
netmount | default
procfs | boot
root | boot
savecache | shutdown
swap | boot
swapfiles | boot
sysctl | boot
sysfs | sysinit
termencoding | boot
tmpfiles.dev | sysinit
tmpfiles.setup | boot
udev | sysinit
udev-mount | sysinit
urandom | boot

$ sudo emerge -pv ntfs3g

These are the packages that would be merged, in order:

Calculating dependencies  ...... done!
[ebuild  N     ] sys-fs/fuse-2.9.3  USE="-examples -static-libs" 559 kB
[ebuild  N     ] sys-fs/ntfs3g-2013.1.13  USE="acl external-fuse ntfsprogs -debug -ntfsdecrypt -static-libs -suid -xattr" 1,149 kB

Total: 2 packages (2 new), Size of downloads: 1,708 kB
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 732
Location: S.O. France

PostPosted: Thu Jul 31, 2014 9:40 pm    Post subject: Reply with quote

I don't know how works dwm
You can try
Code:
rc-update add consolekit default
rc-update add dbus default
gpasswd -a shana usb

Then disable this option in your kernel
Code:
File systems  --->
   DOS/FAT/NT Filesystems  --->
      < > NTFS file system support

Enable this
Code:
File systems  --->
    <*> FUSE (Filesystem in Userspace) support

And emerge ntfs3g
Reboot and try if it work with an ntfs drive
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 281
Location: Canada

PostPosted: Thu Jul 31, 2014 10:37 pm    Post subject: Reply with quote

sebB wrote:
I don't know how works dwm
You can try
Code:
rc-update add consolekit default
rc-update add dbus default
gpasswd -a shana usb

Reboot

After doing the above, i was able to mount my usb.
Thank you (:
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum